Aiphone Security access systems

Aiphone PC-359B is a call holding circuit board that provides latching function when call is placed from a speaker and N/O call button.

Weather resistant Vandal resistant Inside space for cabling Mounts to flat wall surface

PoE compliant 20 Form C relays Relay rating (24V AC/DC 500mA) Max of 16 adaptors per building

Flush wall-mounted Panel is made of self-extinguishing resin Frame & Back Box is made of self-extinguishing plastic

Weather resistant Vandal-resistant Inside space for cabling Mounts to 1-gang box or ring Can mount on a flat wall

An interface between the door release contact on the Aiphone master station or CEU and the actual release mechanism Form C relay for 18-24V DC intercom systems Both normally open and normally closed output options

Made of 12 gauge stainless steel Caged beacon/strobe light on top Assistance Lettering ADA Compliant: 4″ depth to meet ADA requirements to allow mounting higher than 27″, and proper signage and call button mounting height

UL-514-A listed electrical box included at the base Access panel at the rear base of the tower EMERGENCY signage Beacon/Strobe is always lit; flashes during emergency call-in (Requires 24V DC) Weather and vandal resistant LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meets ADA regulations

EMERGENCY lettering Strobe is always lit; flashes during emergency call-in (requires 24V DC) Camera arm with universal pipe threading Weather and vandal resistant Lightweight LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meet ADA regulations UL-514-A listed electrical box included at the base Access panels at the base and middle of the tower

Emergency call from tenant station to GT-MK(B) Pull Cord Switch suitable for wet locations Normally Closed mechanically latching switch rating of 24 VDC at 500mA May be actuated by pulling on nylon cord or by pulling down the red actuator

Aiphone GF-2B is a flush mount 2-module back box.

Aiphone GT-303HB is a vandal resistant 3x3-module surface mount box for GT Series entrance panel.

Aiphone GT-203HB is a vandal resistant 2x3-module surface mount box for GT Series entrance panel.

Aiphone GF-3B is a flush mount 3-module back box.

Aiphone GT-OP2 is a 2-module postal lock with frame.

Aiphone GT-OP3 is a 3-module postal lock with frame.

Aiphone GT-BCXB-N expanded bus control unit distributes power and data to GT Series stations for expanded systems.

Allows multiple buildings to communicate across a single, logical network Allows up to 480 Entrances, 96 Guard Stations, and 5,000 tenants

Long distance adaptor for up to 980’ to door CCTV camera adaptor with audio door station

Provides selective door release capability Compatible with JP, JF, and KB Series Both normally open and normally closed output options

Provides ability to select/call 16 additional door/sub stations Mounts directly to Master Station or other AX-16SW with supplied brackets

Interfaces AX video door station with 3rd party alternate transmission methods for longer distances Transmitter module for fiber connection

Stainless steel surface mount box for card reader door stations Weather resistant Vandal resistant Inside space for cabling Mounts to flat wall surface Opening at bottom for drainage

Allows an external device to be triggered when the intercom is called External device will be activated momentarily as long as the call button on the door station is activated

Allows two master stations to answer a single door station Combined use with RY-AC/A for external signaling

Weather resistant Inside space for cabling Mounts to 1-gang box or ring Can mount directly to wall surface Powder-coated white baked epoxy finish

Works with existing 2-conductor wire Supplies PoE to stations LED status indicators

Flexible design can overhang mullion on either side of the door Wire cutouts allow for installation when there is an external conduit Clearance for Cat-5/6 cables prevents overbending