MCT-441 PERS Wireless Natural Gas Detector provides rapid warnings about leaks of natural gas (Methane CH4) commonly used for cooking, home heating and water heating. Methane CH4 is toxic and highly flammable. When mixed with air, it can pose a suffocation danger and, if there is an ignition source such as a spark from a faulty electrical appliance or even turning on the light, it can cause an explosion.

Attractive, modern ergonomic design – Suitable for carrying, wearing or wall mounting Miniature two-button model for alarm messages and system arming/disarming Safety mechanism for preventing false panic calls Extended battery life Confirms that the system has carried out the user's command PowerG 2-way Frequency Hopping Spread Spectrum FHSS-TDMA technology

Small, slim design One-click arming/disarming, emergency signaling, panic alarm and checking of system status Large transmission range enables repeater-free installations Visible signal quality indication shown on the device Long battery life Visible low battery indication PowerG two-way Frequency Hopping Spread Spectrum FHSS-TDMA technology provides robustness and reliability closer than ever to a wired alarm system Employs the proven AES-128 (128 bit key) advanced encryption algorithm for correct message identification and protects the alarm system from code grabbing and other attacks Configured from the panel – no hardware switches and no need to re-open the device once closed Compatible with PowerMaster systems and PowerG receivers

A 4-button 2-way wireless keyfob for arming and disarming PowerMaster wireless residential alarm systems Transmission range is far greater than the industry standard - enabling repeater-free installations even in large premises Longer battery life Visible signal quality indication shown on the device Four independent functional buttons for arming and disarming as well as for emergency signaling, home automation and other remote control applications PowerG two-way Frequency Hopping Spread Spectrum FHSS-TDMA technology provides robustness and reliability closer than ever to a wired alarm system Employs the proven AES-128 (128 bit key) advanced encryption algorithm for correct message identification and protects the alarm system from code grabbing and other attacks Configured from the panel – no hardware switches and no need to re-open the device once closed Visible and transmitted low battery indication

Attractive, modern ergonomic design – Suitable for carrying, wearing or wall mounting Miniature one-button model for alarm message Safety mechanism for preventing false panic calls Extended battery life Confirms that the system has carried out the user's command PowerG 2-way Frequency Hopping Spread Spectrum FHSS-TDMA technology

A slim, sleek and discreet magnetic contact transmitter, used primarily for protecting doors and windows Compatible with PowerMaster alarm systems and is easy to operate in a wide range of residential and light commercial environments Provides reliable performance using built-in PowerG leading wireless intrusion technology Outstanding, robust communication enables long-range transmission and strengthens protection against interference Simple to install, with a time-saving pull tab Visible signal quality indicator on the device Easy to maintain

Perfect for protecting any outdoor entry or exit, including perimeter gates, pool and garden enclosures, shed doors, windows, and more Designed for both residential and high-volume commercial use Ensures reliable performance using built-in PowerG leading-edge wireless intrusion technology, with two-way communication Extra-long transmission range makes it suited for very large properties Operates dependably in extreme weather and harsh environmental conditions (IP66 certified) Wide gap tolerance reduces false alarms, and makes installation easier Simple installation and maintenance Compatible with PowerMaster alarm systems

A fully supervised two-way magnetic contact transmitter, designed primarily for protecting doors and windows User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors) Large transmission range enabling repeater-free installations Visible signal quality indication shown on the device PowerG two-way Frequency Hopping Spread Spectrum FHSS - TDMA technology – provides robustness and reliability closer than ever to wired systems Employs the proven AES-128 (128 bit key) advanced encryption algorithm for correct message identification and protects the alarm system from code grabbing and other attacks Continuously measures communication quality and automatically sets transmission power to the minimum required for reliable communication Low-battery signaling Operates in a wide range of residential and commercial environments Compatible with PowerMaster® burglar alarm systems

Ideal for protecting doors and windows Fits any door/window type and decor Best for large magnetic gap applications ZigBee HA 1.2 and OTA support Temperature sensing Front cover tamper protection Easy installation and maintainance Low battery alert Simple user battery replacement process

A fully supervised two-way magnetic contact transmitter, designed primarily for protecting doors and windows Large transmission range enabling repeater-free installations Visible signal quality indication shown on the device PowerG two-way Frequency Hopping Spread Spectrum FHSS - TDMA technology – provides robustness and reliability closer than ever to wired systems Employs the proven AES-128 (128 bit key) advanced encryption algorithm for correct message identification and protects the alarm system from code grabbing and other attacks Continuously measures communication quality and automatically sets transmission power to the minimum required for reliable communication Low-battery signaling Operates in a wide range of residential and commercial environments Compatible with PowerMaster® burglar alarm systems

Ideal for protecting doors and windows Fits any door/window type and decor Best for large magnetic gap applications ZigBee HA 1.2 and OTA support Temperature sensing Back cover tamper protection Easy installation and maintainance Low battery alert Simple user battery replacement process

MCT-442 PERS wireless Carbon Monoxide (CO) detector gives early warning of CO poisoning danger, preventing damage to vital organs and even death. As a fully supervised wireless detector, the MCT-442 PERS transmits all alerts to the control panel, which instantly forwards the alert to a central station or private phone number. That enables a rapid and effective response to remove the CO poisoning danger, protecting children, the elderly and even pets, from an invisible and potentially deadly threat.

AmberLink is a personal emergency response system that comprehensively answers central monitoring stations’ need for a wireless, reliable and cost effective emergency and safety response solution. With a clear audio communication channel and wide array of safety detectors, AmberLink enables monitoring stations to receive emergency calls and to accurately assess the customer’s situation remotely. Supporting up to 28 different wireless inputs, AmberLink can comprehensively monitor safety threats, including smoke, flood and carbon monoxide (CO).

Provides programmable low voltage outputs Connects up to 16 modules per system

A dual-purpose module that provides programmable outputs for controlling external devices, and provides an additional +12 V DC 1.0 Amp of additional power Connects to up to 4 modules per system Fully supervised for AC failure, low battery and AUX failure

SRN-2000 ET is the world's most flexible and reliable PIR detector, and is specially designed for energy management systems requiring high sensitivity and large detection coverage. SRN-2000 ET detector operates on 12 VDC supply and can be integrated into virtually any kind of energy management system. It provides exceptionally high sensitivity with a standard coverage pattern of 18m x 18m (60ft x 60ft) / 100o that is adjustable even up to 35m x 35m (115ft x 115ft) to cover very large rooms, halls, etc.

Visonic SD-304 PG2 wireless shock and contact detector provides perimeter protection for residential and commercial premises. It has high immunity to background vibration which can lead to false alarms. The detector fits windows, doors, walls and roof installations. If any attempt is made to mask the contact sensor, advanced magnetic anti-masking activates alerts.

Operating range: 50m/165 ft (outdoor), 100m /325ft (indoor) Dual-beam design prevents false alarms from flying birds, insects, falling leaves, etc Engineered for virtually all weather conditions including snow, rain and fog Outstanding reliability and false alarm immunity Easy and precise beam alignment thanks to built-in view finder Quick and easy installation Tamper protection for transmitter and receiver unit 12 - 24 V DC power supply Designed for a wide variety of outdoor and indoor residential, commercial and industrial applications Provides ideal cost-effective solutions for medium to long-range applications such as perimeter protection of buildings, fences, warehouses, factories, parking lots, gardens, walls, etc.

PL-1 is a passive infrared motion detector designed for outdoor low voltage control applications such as control of gates, lights, CCTV cameras etc. A special built-in photocell and light level control can be activated to limit operation to periods of darkness only. It features rugged construction with integral swivel bracket that enables aiming the detector at the desired direction. The detector operates from a 12 VDC source and has a normally open (N.O.) relay output.

15m (50 ft) 90° multiple-curtain coverage with creep zone Enhanced false alarm immunity by combined Fresnel and cylindrical optics Long-term stability and reliability thanks to advanced true digital FM processing Industry's best catch performance based on proprietary Target Specific Imaging and 3D cylindrical optics Ultimate false alarm immunity based on patented True Motion Recognition with exceptionally high sampling rates and "Event Verification" algorithm Sealed optics - protects from insects and air current Digital temperature compensation White light and UV protection Remote walk-test capabilities Solid-state relay for silent trouble-free operation Fast and easy adjustment-free installation Attractive sleek design suitable for any home or office environment Meets EN50131-2 European standards

Visonic's PowerManage™ is a unique IP receiver and management platform that enables alarm central stations and other security service providers to get maximum benefit from using IP technology for monitored premises. By using the PowerManage the central monitoring stations gains many advantages that will no doubt improve both its customers' service and ROI. Supports Visonic communication modules - GSM and GPRS  Supports up to 20,000 concurrent customers with optional supervision frequency of between 2 minutes-2 days PowerManage Lite variant for smaller monitoring stations (supports up to 5,000 accounts)  Provide status of the monitored alarm systems and devices  Provide alarm verification* for burglar, fire and personal emergency events - receives the events (images and/or audio), stores, and forwards to ARC processing systems (automation software) Brand new, intuitive and easy to use web interface application for the operator and administrator Define and manage accounts (login) and permissions for PowerManage operators, enabling full management of the connected systems Optional full cluster-redundant and/or dual-reporting deployment configuration Programming multiple panels even with different versions Built-in billing reports engine Configurable messaging dispatcher application capable of forwarding events to end-users using email, SMS and MMS * On-demand access for cameras installed in the premise is also available

PIR detector Maximum coverage area: 15m (50ft) / 90° Exceptionally high reliability and false alarm immunity Sealed optics - protects from insects and air current Durable and elegant design Integral swivel bracket for wall and ceiling mounting White light and UV protection Microprocessor-controlled temperature compensation

Inconspicuous high-performance PIR Maximum coverage area: 9 x 13.5m (30 x 45ft) / 100° Exceptionally high reliability and false alarm immunity Alternate polarity pulse counter Enhanced 20V/m RFI immunity 12° vertical adjustment Switchable walk-test LED Tamper switch Wall-mount and corner installation

Advanced anti-masking and self-test "Motion Simulation" to detect malfunction and attempts to defeat the detector Advanced passive infrared technology Optimized signal processing for superior detection without false alarms Ultimate false alarm immunity based on patented "True Motion Recognition" algorithm High-sensitivity coverage up to 15m x 15m (50ft x 50ft) Adjustable vertical calibration Sealed sensor chamber for protection from insects and air currents 9-16 VDC power supply Surface, corner and optional swivel mounting Durable elegant design suitable for any office, commercial or light industrial environment

Visonic's visual alarm verification solution, RealAlarm™, is a powerful tool that enables monitoring stations to avoid unnecessary responses to false alarms and to remotely assess the situation when an alarm is real. PIR cameras installed in strategic locations on the premises immediately turn on when alarm is activated. Monitoring facility personnel can review images taken by the cameras prior to notifying the authorities and provide detailed information to respondents about the emergency. Armed with this information, respondents are better prepared to take appropriate action.Also, with RealAlarm, alarm monitoring services can follow emergency procedures remotely. This reduces the need to physically visit the property to check for a break-in - a process that is generally inconvenient, costly, time-consuming and potentially dangerous.Visonic's RealAlarm also offers visual alarm verification for homes and businesses where an alarm system is already installed. RealAlarm can be retrofitted on any existing wired installation simply by connecting the wired system to the hard wired zone in the PowerMaster control panel. With the addition of strategically-positioned, wireless PIR cameras (Next CAM) placed throughout the premises, customers can receive all the benefits of accurate visual alarm verification without having to change existing infrastructure. All PowerMaster accessories are fully wireless and battery-powered which makes for easy installation and low cost maintenance.

The Visonic GB-501 PG2 is a wireless, digital, glass-break wireless detector compatible with PowerMaster control panels.  It is designed for a wide range of residential and commercial applications where reliable glass-break detection is required. GB-501 PG2 employs an advanced, patented, acoustic pattern recognition technology that can reliably distinguish between real and false alarms.

15m (50 ft) 90° multiple-curtain coverage with creep zone Pet-tolerant for animals up to 38 kg (85 lb) Enhanced false alarm immunity by combined Fresnel and cylindrical optics Long-term stability and reliability thanks to advanced true digital FM processing Industry's best catch performance based on proprietary Target Specific Imaging and 3D cylindrical optics Ultimate false alarm immunity based on patented True Motion Recognition with exceptionally high sampling rates and "Event Verification" algorithm Sealed optics - protects from insects and air current Digital temperature compensation White light and UV protection Remote walk-test capabilities Solid-state relay for silent trouble-free operation Fast and easy adjustment-free installation Attractive sleek design suitable for any home or office environment Meets EN50131-2 European standards

Superior detection algorithm sensing the sound of most types of breaking glass, including plate, tempered, laminated, wired, coated and sealed insulated glass A single detector covers a room up to 120 sqm / 1288 sqft Integrated test simulator; No need for additional tooling for installation verification Supported Network: ZigBee H.A 1.2, OTA firmware upgrade support Frequency: 2.405 – 2.480 GHz as per IEEE 802.15.4 Temperature sensing Tamper Alert: Back tamper protection; reported when tamper event occurs