Senstar Security communication

A single-mode fiber optic communications card with ST connectors (9/125 single-mode fiber, 1310 nm) with A and B side Tx/Rx connections for Silver network Allows distances of up to 10 km (32,000 ft)

An ultrasonic emergency notification/communication system The receiver decodes the modulated ultrasonic signal emitted by the PAT transmitter An alarm contact, auxiliary contact and LED latch each time an alarm is received They remain latched when an activated transmitter is within range The latching condition is held for 5 seconds after the transmitter is deactivated Receiving range is factory adjusted for a nominal distance of 15 m (50 ft) radius, 30 m (100 ft) diameter. This can be field adjusted if required The red alarm LED assures the user that the transmitter signal has been received and the alarm message has been sent The receiver is water-resistant and may be installed outdoors Heater for colder climates In the event of an alarm activation, the event is localized to the area monitored by the reporting receiver Flush-mounted in the wall or ceiling

Senstar 00BA2000 is an EIA-422 communications card with A and B side Tx/Rx connections for Silver networks.

Multi-mode fiber optic network card with ST connectors (820 nm) to support A and B side Tx/Rx connections for Silver network Allows distances of up to 2.2 km (7,200 ft)

Senstar 00BA2200 is an Ethernet 10/100BASE-TX network card.

Senstar 00BA2700 Ethernet card with PoE option, 48 VDC output, can provide power to host FlexZone processor plus nearest neighbor on each side.

Up to 100 luminaires per gateway USB configuration port Network connectivity: Ethernet, RS-422, or fiber (single-mode or multi-mode) Alarm queuing in the event of network interruption 10 programmable I/O ports (controlled locally or via network) Input mode: Light control; Programmable supervision type, resistor value(s) and filtering Output mode: Function of each relay can be assigned based on requirements; Assignable functions under local control include: alarm, supervision, door tamper, power fail and fail-safe; Provides power for external devices (100 mA) Add-on relay output and dry-contact input cards provide an additional 4 output or input points per gateway 5 cable entry points with compression glands (includes filler plugs) External ground lug Rugged all-weather aluminum UL, NEMA Type 4X enclosure with hinged, locking cover and a gray polyester powder paint finish

Up to 100 luminaires per gateway USB configuration port Network connectivity: Ethernet, RS-422, or fiber (single-mode or multi-mode) Luminaire AP-Gateway connectivity: RS-485 Alarm queuing in the event of network interruption 10 programmable I/O ports (controlled locally or via network) Input mode: Light control; Programmable supervision type, resistor value(s) and filtering Output mode: Function of each relay can be assigned based on requirements; Assignable functions under local control include: alarm, supervision, door tamper, power fail and fail-safe; Provides power for external devices (100 mA) Add-on relay output and dry-contact input cards provide an additional 4 output or input points per gateway 5 cable entry points with compression glands (includes filler plugs) External ground lug Rugged all-weather aluminum UL, NEMA Type 4X enclosure with hinged, locking cover and a gray polyester powder paint finish

An ultrasonic emergency notification/communication system Immediately detect and locate an individual in distress Omni-directional reflective ultrasonic signal ensures reception of alarm signal Modulated ultrasonic signal results in very few false alarms Ultrasonic does not penetrate walls - alarms can be localized to a given room Push button activated Audible low-battery warning on transmitter Rugged design for reliable operation Integrates easily with security management system (1 relay per receiver) Low power transmitters for long battery life Variable range to 30 m (100 ft) diameter

An ultrasonic emergency notification/communication system Immediately detect and locate an individual in distress Omni-directional reflective ultrasonic signal ensures reception of alarm signal Modulated ultrasonic signal results in very few false alarms Ultrasonic does not penetrate walls - alarms can be localized to a given room Compact, push button or pull-ring activated Audible low-battery warning on transmitter Rugged design for reliable operation Integrates easily with security management system (1 relay per receiver) Low power transmitters for long battery life Variable range to 30 m (100 ft) diameter

An ultrasonic emergency notification/communication system The receiver decodes the modulated ultrasonic signal emitted by the PAT transmitter An alarm contact, auxiliary contact and LED latch each time an alarm is received They remain latched when an activated transmitter is within range The latching condition is held for 5 seconds after the transmitter is deactivated Receiving range is factory adjusted for a nominal distance of 15 m (50 ft) radius, 30 m (100 ft) diameter. This can be field adjusted if required The red alarm LED assures the user that the transmitter signal has been received and the alarm message has been sent The receivers are water-resistant and may be installed outdoors In the event of an alarm activation, the event is localized to the area monitored by the reporting receiver Flush-mounted in the wall or ceiling

Receiver card for wireless gate sensor Plugs into FlexZone processor or Senstar LM100 gateway 20-pin processor interface header RF connector for supplied antenna Monitors up to four sensor modules per processor

An accelerometer-based device that detects attempts to open, cut, climb, or otherwise break through a sliding or swinging gate Analyzes vibration, motion and position data Transmits intrusion and supervision alarms, power levels, RF link status, and auxiliary input state to the receiver card over the encrypted wireless link Wireless operation eliminates need to route cables from fence to moving gate panels 300 m (986 ft) transmission range (nominal, line-of-sight) from processor Secure, 128-bit encrypted RF transmissions Protects each moving gate section with only one sensor module Easily installed on chain-link, wire mesh, expanded wire mesh, and palisade-style fence gates High Probability of detection (Pd) On-board auxiliary input for monitoring gate contact Internal batteries

An ultrasonic emergency notification/communication system Immediately detect and locate an individual in distress Omni-directional reflective ultrasonic signal ensures reception of alarm signal Modulated ultrasonic signal results in very few false alarms Ultrasonic does not penetrate walls - alarms can be localized to a given room Push button or man-down activated Audible low-battery warning on transmitter Rugged design for reliable operation Integrates easily with security management system (1 relay per receiver) Low power transmitters for long battery life Variable range to 30 m (100 ft) diameter

An ultrasonic emergency notification/communication system The receiver decodes the modulated ultrasonic signal emitted by the PAT transmitter An alarm contact, auxiliary contact and LED latch each time an alarm is received They remain latched when an activated transmitter is within range The latching condition is held for 5 seconds after the transmitter is deactivated Receiving range is factory adjusted for a nominal distance of 15 m (50 ft) radius, 30 m (100 ft) diameter. This can be field adjusted if required The red alarm LED assures the user that the transmitter signal has been received and the alarm message has been sent In the event of an alarm activation, the event is localized to the area monitored by the reporting receiver Flush-mounted in the wall or ceiling

An accelerometer-based device that detects attempts to open, cut, climb, or otherwise break through a sliding or swinging gate Analyzes vibration, motion and position data Transmits intrusion and supervision alarms, power levels, RF link status, and auxiliary input state to the receiver card over the encrypted wireless link Wireless operation eliminates need to route cables from fence to moving gate panels 300 m (986 ft) transmission range (nominal, line-of-sight) from processor Secure, 128-bit encrypted RF transmissions Protects each moving gate section with only one sensor module Easily installed on chain-link, wire mesh, expanded wire mesh, and palisade-style fence gates High Probability of detection (Pd) On-board auxiliary input for monitoring gate contact Built-in solar panel

19-inch rack shelf, supports two FP400 processors and provides fiber management for two connecting field cables. Fits in 1U space Fiber optic fence-mounted perimeter intrusion detection sensor that detects any attempt to cut, climb, or otherwise break through the fence 4 detection zones per processor, with up to 300 m (984 ft) of sensor cable per zone Up to 20 km (12.4 mi) of insensitive lead cable to zone start Environmentally Derived Adaptive Processing Technology (EDAPT) minimizes nuisance alarms Light-weight, easy-to-install fiber optic sensor cable is immune to EMI and lightning and is intrinsically safe in explosive atmospheres Outdoor, extended temperature-rated processor may be panel-mounted, installed on a rack tray, or installed outdoors in a protectiveenclosure Supports most fence types Built-in Ethernet with Power over Ethernet (PoE) support Low power consumption On-board alarm history storage (internal queuing in case of network interruption) Calibrated with Windows®-based point-and-click utility – over the network or locally via USB Software-configurable output relays and auxiliary inputs simplify integration with alarm panels and other security devices Common Network Manager protocol interface leverages existing SMS/VMS/PSIM/AC integrations Ideal for protecting electrical substations, pipeline valve and  pump stations, oil and gas well-pads, and other critical infrastructure sites

Combines accelerometer based sensors with high performance LED lighting Detects intruders at the fence line and deters them by letting them know they have been exposed High Probability of detection (Pd) Pinpoint intrusions to the nearest luminaire Environmentally Derived Adaptive Processing Technology (EDAPT) Instant-on or strobe lighting at intrusion attempt location provides psychological deterrent to potential intruders Uniform, full-spectrum lighting (CRI value greater than 70) Focused illumination along the fence line Low power consumption (2.5W per luminaire) Wireless self-healing mesh network (2.4 GHz, 128-bit AES encrypted) eliminates need for inter-luminaire communication wiring Rugged metal mounting arms attach to most fence types and walls Designed and tested for harsh environments Interfaces with most alarm panels and Security Management Systems (SMS) Seamless integration with other Senstar perimeter intrusion detection sensors

Combines accelerometer based sensors with high performance LED lighting Detects intruders at the fence line and deters them by letting them know they have been exposed High Probability of detection (Pd) Pinpoint intrusions to the nearest luminaire Environmentally Derived Adaptive Processing Technology (EDAPT) Instant-on or strobe lighting at intrusion attempt location provides psychological deterrent to potential intruders Uniform, full-spectrum lighting (CRI value greater than 70) Focused illumination along the fence line Low power consumption (2.5W per luminaire) Wireless self-healing mesh network (2.4 GHz, 128-bit AES encrypted) eliminates need for inter-luminaire communication wiring Rugged metal mounting arms attach to most fence types and walls Designed and tested for harsh environments Interfaces with most alarm panels and Security Management Systems (SMS) Seamless integration with other Senstar perimeter intrusion detection sensors

Combines accelerometer based sensors with high performance LED lighting Detects intruders at the fence line and deters them by letting them know they have been exposed High Probability of detection (Pd) Pinpoint intrusions to the nearest luminaire Environmentally Derived Adaptive Processing Technology (EDAPT) Instant-on or strobe lighting at intrusion attempt location provides psychological deterrent to potential intruders Uniform, full-spectrum lighting (CRI value greater than 70) Focused illumination along the fence line Low power consumption (2.5W per luminaire) Wireless self-healing mesh network (2.4 GHz, 128-bit AES encrypted) eliminates need for inter-luminaire communication wiring Rugged metal mounting arms attach to most fence types and walls Designed and tested for harsh environments Interfaces with most alarm panels and Security Management Systems (SMS) Seamless integration with other Senstar perimeter intrusion detection sensors

Fiber optic fence-mounted perimeter intrusion detection sensor that detects any attempt to cut, climb, or otherwise break through the fence 4 detection zones per processor, with up to 300 m (984 ft) of sensor cable per zone Up to 20 km (12.4 mi) of insensitive lead cable to zone start Environmentally Derived Adaptive Processing Technology (EDAPT) minimizes nuisance alarms Light-weight, easy-to-install fiber optic sensor cable is immune to EMI and lightning and is intrinsically safe in explosive atmospheres Outdoor, extended temperature-rated processor may be panel-mounted, installed on a rack tray, or installed outdoors in a protectiveenclosure Supports most fence types Built-in Ethernet with Power over Ethernet (PoE) support Low power consumption On-board alarm history storage (internal queuing in case of network interruption) Calibrated with Windows®-based point-and-click utility – over the network or locally via USB Software-configurable output relays and auxiliary inputs simplify integration with alarm panels and other security devices Common Network Manager protocol interface leverages existing SMS/VMS/PSIM/AC integrations Ideal for protecting electrical substations, pipeline valve and  pump stations, oil and gas well-pads, and other critical infrastructure sites

Detects and locates any attempt to cut, climb or otherwise break through the fence Also locates intrusions even when there are multiple simultaneous intrusions and in the presence of background environmental noise Supports up to 4 zones Detects and locates perimeter intrusions over a distance of up to 600 m (1,968 ft) per sensor processor Pinpoint intrusions with ±3 m (±10 ft) accuracy Flexible, software-based zoning Precision sensitivity leveling (per meter) Power and data over sensor cables simplify infrastructure requirements High Probability of detection (Pd) Environmentally Derived Adaptive Processing Technology (EDAPT) Communication path redundancy ensures continued perimeter protection in the event of a cable cut Low power consumption Software-configurable output relays simplify integration with alarm monitoring systems Audio output of fence response Silver Network compatibility enables integrated networking with OmniTrax®, LM100™, UltraWave™ and XField® systems Sensors calibrated with Windows®-based point-and-click utility (over the network or locally via USB) Interfaces with almost any alarm monitoring system Internal alarm queuing in case of network interruption 

Detects and locates any attempt to cut, climb or otherwise break through the fence Also locates intrusions even when there are multiple simultaneous intrusions and in the presence of background environmental noise Supports up to 60 zones Detects and locates perimeter intrusions over a distance of up to 600 m (1,968 ft) per sensor processor Pinpoint intrusions with ±3 m (±10 ft) accuracy Flexible, software-based zoning Precision sensitivity leveling (per meter) Power and data over sensor cables simplify infrastructure requirements High Probability of detection (Pd) Environmentally Derived Adaptive Processing Technology (EDAPT) Communication path redundancy ensures continued perimeter protection in the event of a cable cut Low power consumption Software-configurable output relays simplify integration with alarm monitoring systems Audio output of fence response Silver Network compatibility enables integrated networking with OmniTrax®, LM100™, UltraWave™ and XField® systems Sensors calibrated with Windows®-based point-and-click utility (over the network or locally via USB) Interfaces with almost any alarm monitoring system Internal alarm queuing in case of network interruption 

Consists of a transmitter (Tx) and receiver (Rx) which create an invisible detection zone that alerts when an intrusion occurs Zone lengths from 5 to 200 m (16 to 656 ft); stackable for increased detection zone height High Probability of detection (Pd) Low Nuisance Alarm Rate (NAR) Discriminates valid targets from environment effects Stable operation over temperature and equipment aging Automatic Gain Control (AGC) automatically adjusts to varying path loss due to Tx-Rx separation, surrounding conditions and weather PLL-controlled VCO provides ultra-stable operating frequency Up to 10 operating channels for more interchannel isolation and installation flexibility Transmitter modulation used for Tx-Rx communications – Tx-Rx communications link provides full transmitter supervision and health status with no data wiring to transmitter Two output relays for local, non-networked operation Silver Network™ compatibility allows shared network wiring with OmniTrax®, FlexZone®, and XField® sensors Remote diagnostics over sensor network Easy to configure via Universal Configuration Module (UCM) software Designed and manufactured for harsh outdoor environments

Provides 32 output points Source voltage for outputs provided externally Up to 48 VDC, 100 mA maximum ‘on’ current 4 source voltage connections, each routed to 8 open-collector high-side contacts Configurable activation type (latching, flash mode, pulse) and timing (0.125 to 10 seconds)

Precision locating fiber sensor for fence, wall-top, and buried perimeter intrusion detection applications Detect and locate perimeter intrusions over a distance of up to 40 km  (24.8 mi) on each of its two sensor channels, up to 80 km (49.7 mi) in total Pinpoint intrusions with a ±4 m (13 ft) accuracy Accurate locating of multiple simultaneous intrusions Sensor cable continues to operate up to the point of a cut Dual sensor channels 100% operational after a cable cut in cut-immune configuration; maximum perimeter 40 km (24.8 mi) High Probability of detection (Pd) and low Nuisance Alarm Rate (NAR) Software-configurable detection zones No outdoor power or communication infrastructure required EMI and lightning immune No electronics or grounding points required in the field Accurate locating for directing surveillance cameras and/or response forces Field components intrinsically safe Alarms reported by zone number, cable distance and/or GPS coordinates Multiple options for integration with SMS, VMS and PSIM platforms Easy to install and maintain

Precision locating fiber sensor for fence, wall-top, and buried perimeter intrusion detection applications Detect and locate perimeter intrusions over a distance of up to 5 km  (3.10 mi) on each of its two sensor channels, up to 10 km (6.21 mi) in total Pinpoint intrusions with a ±4 m (13 ft) accuracy Accurate locating of multiple simultaneous intrusions Sensor cable continues to operate up to the point of a cut Dual sensor channels 100% operational after a cable cut in cut-immune configuration; maximum perimeter 40 km (24.8 mi) High Probability of detection (Pd) and low Nuisance Alarm Rate (NAR) Software-configurable detection zones No outdoor power or communication infrastructure required EMI and lightning immune No electronics or grounding points required in the field Accurate locating for directing surveillance cameras and/or response forces Field components intrinsically safe Alarms reported by zone number, cable distance and/or GPS coordinates Multiple options for integration with SMS, VMS and PSIM platforms Easy to install and maintain

Provides additional 32 input points Input activation: NO or NC Supervision types (none, single, double) and resistor values Required input activation time Noise tolerance and line drop allowance Two LEDs per input: alarm, supervision Full lightning protection: trazorbs and gas discharge devices on each input