For monitoring armored cabinets, cash boxes, automatic teller machines, strong rooms, night safes, modular vaults, and vault walls for all known burglary tools such as diamond-tipped drills, hydraulic rams, oxygen lances and explosives Completely protected against electrical influences Programmable sensitivity and response time via LSN Remote controlled reduction of sensitivity Alarm, tampering and faults are evaluated via the LSN bus 

Used to monitor modular vaults, vault walls, and safe doors Complete protection against electrical influences Remotely controlled reduction of sensitivity Pre-alarm - Memory with optical display Integrated test system Monitoring of the supply voltage

Bosch CRS-MADO-869B sensor with Bosch protocol has a built-in tilt device, which can detect if the person holding it is in a horizontal position, such as lying on the floor. The sensor will automatically send an alarm when its position corresponds to horizontality after a certain time. Pressing its central red button will activate a help call at any time. The sensor can be held, for example, as a necklace by an elderly person or as a safety device by a lone worker in a hazardous environment. It can be associated with a Carephone receiver and linked to a social alarm call center through the telephone line. It also features battery monitoring as well as acoustical pre-alarm.

Bosch CRS-CP-MD-TA sensor with TeleAlarm protocol has a built-in tilt device, which can detect if the person holding it is in a horizontal position, such as lying on the floor. The sensor will automatically send an alarm when its position corresponds to horizontality after a certain time. Pressing its central red button will activate a help call at any time. The sensor can be held, for example, as a necklace by an elderly person or as a safety device by a lone worker in a hazardous environment. It can be associated with a Carephone receiver and linked to a social alarm call center through the telephone line. It also features battery monitoring as well as acoustical pre-alarm.

Bosch CRS-RM-435FM sensor with TeleAlarm protocol has a built-in tilt device, which can detect if the person holding it is in a horizontal position, such as lying on the floor. The sensor will automatically send an alarm when its position corresponds to horizontality after a certain time. Pressing its central red button will activate a help call at any time. The sensor can be held, for example, as a necklace by an elderly person or as a safety device by a lone worker in a hazardous environment. It can be associated with a Carephone receiver and linked to a social alarm call center through the telephone line. It also features battery monitoring as well as acoustical pre-alarm.

Works with compatible control panels to protect the battery from deep discharge in the event of an extended AC power outage Prevents deep discharge by disconnecting the battery from the control panel when battery voltage drops down to 9.5 VDC Required for use with compatible control panels for CAN/ULC S559 Quick and easy installation

Provides up to 2 A of 12 V standby current for Fire or Burglar Applications (4 A of Burglary alarm current) Supervises up to two 12 V 7-18 Ah batteries independently for up to 36 Ah of capacity Provides up to 80 hours of standby time Easy-to-read switch addressing Uses the Bosch standard TR1850 plug-in transformer

Provides a single telephone line with RJ-45 connection for central station reporting and remote programming Easily configured for communications from Remote Programming Software (RPS) or a keypad, eliminating the need for separate configuration Easy two-step plug-in installation, troubleshooting, and maintenance

Converts 24 VDC to 12 VDC Maximum current 500 mA Mounts in NNK100 enclosure or two converters on MAP Accessory Mounting Plate Limits and indicates over-current conditions

Supports two-way IP communications using plug-in cellular communicators for compatible control panels Plug and Play installation makes future radio technology changes easy Compatible with new and most deployed Bosch control panels Supports remote installation of cellular modules for improved signal Works with plug-in communicators for primary or backup alarm communication, remote programming, and other remote applications A reliable way to add cellular network communications to existing or new commercial security and fire installations

Fixed frequency of 433.42 MHz Wired (RS-485) to coordinator Wireless communication between receiver and transmitter Built-in 2 inputs and 2 relay outputs Remote firmware upgradable via wired RS-485

Supports cellular communication for remote programming and mobile apps on AMAX and Solution Series control panels Plug and Play installation makes future radio technology changes easy Compatible with new and most deployed Bosch control panels Supports remote installation of cellular modules for improved signal Works with plug-in communicators for primary or backup alarm communication, remote programming, and other remote applications A reliable way to add cellular network communications to existing or new commercial security and fire installations

Provides two independent power ports with fixed 28 VDC regulated output Provides 150 W for battery charging and system power Provides controlled 500 mA, 24 VDC nominal auxiliary output Provides color‑coded terminal for easy installation Provides two dry relay contacts for AC and DC trouble signaling

Intelligent 3-axis vibration detection Self-learning mode Dual-color LED indicator Adjustable sensitivity Slim design for easy installation

Lead battery Shock-resistant plastic enclosure Dry-cell battery Can be used irrespective of its position Low self-discharge Can be used for intrusion alarm systems according to DIN EN 50131-1

Suitable for a main panel, a DE module, a power supply, 2x 40 Ah batteries and 4x LSN gateways Includes a hinged mounting plate, panel enclosure, tamper switch, enclosure lockset, and AC terminal block

Lead battery Shock-resistant plastic enclosure Dry-cell battery Can be used irrespective of its position Low self-discharge Can be used for intrusion alarm systems according to DIN EN 50131-1

Bolt contact in LSN technology For outdoor use For connecting to a LSN intrusion control panel VdS class C LSN perimeter protection

For monitoring interior door closure Bolt contact in conventional technology For connecting to a conventional intrusion control panel VdS class C Conventional perimeter protection

Suitable for a power supply, 2x 18 Ah batteries and x LSN gateways Expands the MAP system Includes a expansion enclosure, tamper switch, enclosure lockset, and AC terminal block

Lead battery Shock-resistant plastic enclosure Dry-cell battery Can be used irrespective of its position Low self-discharge Can be used for intrusion alarm systems according to DIN EN 50131-1

Lead battery Shock-resistant plastic enclosure Dry-cell battery Can be used irrespective of its position Low self-discharge Can be used for intrusion alarm systems according to DIN EN 50131-1

Can be added to a MAP Panel Enclosure Kit to increase the back-up time Suitable for a power supply and two sets of 2x 12 V / 38-45 Ah batteries Includes a power enclosure, tamper switch, enclosure lockset, AC terminal block, and an accessory pack containing connection cables

Provides a single powered initiating device circuit Suitable for use with 2-wire smoke detectors and burglary devices Supports up to 20 compatible smoke detectors Resets latching devices from the control panel Connects to the control panel terminal block with easy-to-install integrated pins

Programmable relay functions Provides eight Form C relays 1 A at 30 VDC relay contact rating For the G Series control panels, slide switches are configured for specific relay output numbers, which are activated according to their programming Allows remote control of relays Suitable for applications requiring Form C relays to operate auxiliary systems or to display fire system status at remote annunciators Building components such as HVAC, door lock releases, and stairwell pressurisation can interface with the module for complete systemcontrol and monitoring Industrial, commercial, and institutional facilities are typical installations The eight on-board relays can be programmed to activate on system alarm, system trouble, individual zone or point faults, and through remote control by authorized users.

For monitoring perimeter door closure Bolt contact in conventional technology For connecting to a conventional intrusion control panel VdS class C Conventional perimeter protection

Bolt contact in LSN technology For monitoring the closure of doors For connecting to a LSN intrusion control panel VdS class C LSN perimeter protection

Bosch DS1101i-CHI glassbreak detector uses microprocessor-based sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass. The detector can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer to false alarm hazards in harsh environments. The round detector mounts on the ceiling or walls. For use in China.