The 3000 Series Simplex Digital Lock provides fully mechanical pushbutton access control for narrow stile aluminum doors, with no electrical wiring, electronics or batteries. Exterior access is by combination or key override. Egress is by Alpro hardware and is free at all times.

This compact rugged cabinet lock is designed to be fitted in display cases, cabinets and lockers with either swing or sliding doors requiring electronic control and where keys are not a practicable solution. The innovative design enables the lock to be fitted vertically or horizontally whilst receiving the striker plate from the front, side or slide entry positions.

This compact rugged cabinet lock is designed to be fitted in display cases, cabinets and lockers with either swing or sliding doors requiring electronic control and where keys are not a practicable solution. The innovative design enables the lock to be fitted vertically or horizontally whilst receiving the striker plate from the front, side or slide entry positions.

This compact rugged cabinet lock is designed to be fitted in display cases, cabinets and lockers with either swing or sliding doors requiring electronic control and where keys are not a practicable solution. The innovative design enables the lock to be fitted vertically or horizontally whilst receiving the striker plate from the front, side or slide entry positions.

This compact rugged cabinet lock is designed to be fitted in display cases, cabinets and lockers with either swing or sliding doors requiring electronic control and where keys are not a practicable solution. The innovative design enables the lock to be fitted vertically or horizontally whilst receiving the striker plate from the front, side or slide entry positions.

Alpro’s Vortex 2400 compact door magnet is a unique magnet with patented inbuilt technology ensuring improved performance and reliability and a real alternative to standard face to face magnets. Complete with a conical aperture to receive a strong alloy pin the unit embodies both magnetic and mechanical holding force.

Alpro’s Vortex 2400 compact door magnet is a unique magnet with patented inbuilt technology ensuring improved performance and reliability and a real alternative to standard face to face magnets. Complete with a conical aperture to receive a strong alloy pin the unit embodies both magnetic and mechanical holding force.

The Alpro EB250 & EB250KO key override bolts allow for both remote access and exit control of most timber, metal and UPVC doors. It is also suitable for sliding or swing, single or double action operations. It can be fitted in the frame or in the door. With concealed mortise mounting and slimline styling the bolts suit most narrow stile aluminum doors and narrow profile joinery.

An ANSI style security strike complete with stainless steel short faceplates for use in metal or timber door applications High Holding Force Simple Fail Safe/Fail Secure Changeover Lipless Weather Resistant Easy Installation

An ANSI style security strike complete with stainless steel short faceplates for use in metal or timber door applications High Holding Force Simple Fail Safe/Fail Secure Changeover Lipless Weather Resistant Easy Installation

An ANSI style security strike complete with stainless steel long faceplates for use in metal or timber door applications High Holding Force Simple Fail Safe/Fail Secure Changeover Lipless Weather Resistant Easy Installation

The Alpro AL2000 series high security monitored strikes are designed for timber and metal door applications.

An ANSI style security strike complete with stainless steel long faceplates for use in metal or timber door applications High Holding Force Simple Fail Safe/Fail Secure Changeover Lipless Weather Resistant Easy Installation

The Alpro DB25 incorporates the latest design innovations to be applied to the manufacture of a transverse action Deadlocking Solenoid Bolt. This Ultra-slim design enables fixing into very narrow sections whilst an advanced microprocessor module provides power reduction allowing for continuous operation without heat generation as well as automatic voltage regulation, dual monitoring and access control features

24v DC ANSI complete with SS short/long faceplate and 25mm extension lip Fail Open/PTL For use in metal and timber applications Has a 35mm deep, compact stainless steel body design Low current consumption

24v DC ANSI complete with SS short/long faceplate and 25mm extension lip Fail Secure/PTO For use in metal and timber applications Has a 35mm deep, compact stainless steel body design Low current consumption

Fail Secure - Power To Open The compact rugged cabinet lock is designed to be fitted in display cases, cabinets and lockers with either swing or sliding doors requiring electronic control and where keys are not a practicable solution The innovative design enables the lock to be fitted vertically or horizontally while receiving the striker plate from the front, side or slide entry positions Offers maximum flexibility and alignment adjustment

Mortice shearlock - 12/24vDC door position switch - monitored complete with on board PCB/plug in 3m flying leads

Fail Secure - Power To Open The compact rugged cabinet lock is designed to be fitted in display cases, cabinets and lockers with either swing or sliding doors requiring electronic control and where keys are not a practicable solution The innovative design enables the lock to be fitted vertically or horizontally while receiving the striker plate from the front, side or slide entry positions Offers maximum flexibility and alignment adjustment

An ANSI style security strike complete with stainless steel long faceplates for use in metal or timber door applications High Holding Force Simple Fail Safe/Fail Secure Changeover Monitored Weather Resistant Easy Installation

An ANSI style security strike complete with stainless steel long faceplates for use in metal or timber door applications High Holding Force Simple Fail Safe/Fail Secure Changeover Monitored Weather Resistant Easy Installation

An ANSI style security strike complete with stainless steel short faceplates for use in metal or timber door applications High Holding Force Simple Fail Safe/Fail Secure Changeover Monitored Weather Resistant Easy Installation

An ANSI style security strike complete with stainless steel short faceplates for use in metal or timber door applications High Holding Force Simple Fail Safe/Fail Secure Changeover Monitored Weather Resistant Easy Installation

The Alpro DB25 incorporates the latest design innovations to be applied to the manufacture of a transverse action Deadlocking Solenoid Bolt. This Ultra-slim design enables fixing into very narrow sections whilst an advanced microprocessor module provides power reduction allowing for continuous operation without heat generation as well as automatic voltage regulation, dual monitoring and access control features

The Alpro EB501 Electric Mini Bolt allows for remote access and exit control of most timber, metal and UPVC Doors. Suitable for sliding or swing, single and double action operations. It can be fitted in the frame or in the door and is also suitable for narrow profile joinery cabinets and showcases.

12v DC ANSI monitored complete with SS short/long faceplate and 25mm extension lip Fail Open/PTL For use in metal and timber applications Has a 35mm deep, compact stainless steel body design Low current consumption

12v DC ANSI monitored complete with SS short/long faceplate and 25mm extension lip Fail Secure/PTO For use in metal and timber applications Has a 35mm deep, compact stainless steel body design Low current consumption

24v DC ANSI monitored complete with SS short/long faceplate and 25mm extension lip Fail Open/PTL For use in metal and timber applications Has a 35mm deep, compact stainless steel body design Low current consumption