Hikvision Installation Guide - Varifocal EXIR Dome Camera

Installation steps for the Hikvision varifocal EXIR network dome camera are given below:

1. Install the memory card into the memory card slot and push to get it mounted
2. Separate the junction box and the adapter plate
3. Mark 4 screw holes at desired mounting location according to screw holes on the adapter plate
4. Secure the adapter plate to the ceiling with four supplied screws
5. For RJ45 network interface, use the supplied cable routing tool
6. Route cables through junction box
7. Align the ‘FRONT’ marks on junction box and adapter plate
8. Secure the junction box to adapter plate with three screws
9. Connect the cables to correspondent plugs on camera bottom
10. Fix the camera body to the junction box with three screws
11. Adjust surveillance angle

The camera installation is complete and it's ready for use.

• Network / IP
• Security installation
• Security cameras
• Network cameras
• CCTV mounts