Jason Klein

DITEK, the quality standard in commercial surge protection, announces the launch of the DTK-HDMI family of compact HDMI surge protectors designed for professional use. These rugged single- and dual-channel units combine state-of-the-art circuit technology with tough powder-coated aluminum housings to provide robust surge protection that is ideal for commercial multi-screen installations. The units are compatible with the latest high-definition formats, including HDMI 2.0a, HDCP 2.2, and 4K UHD. Supports latest video protocols “Multi-screen installations such as those found in hotels, sports venues, restaurants, and bars depend on their AV systems to attract and entertain their customers,” said Jason Klein, National Sales Manager, DITEK. “These professional installations deserve professional-grade protection. Our new HDMI protectors support the latest video protocols, are housed in a rugged protective housing, and are backed by a limited 10-year warranty.” Two versions are available: DTK-HDMI1 is a single-channel surge protector, and DTK-HDMI2 is a 2-channel surge protector. Both versions use the same advanced design to provide protection while supporting the latest high definition video formats. Both versions include a convenient, versatile mounting bracket and are made in the USA.

DITEK, global provider of surge protection solutions, is showcasing its Deflector Series Surge Protective Devices at ISC West 2019 (booth #6117), slated to take place at the Sands Expo Convention Center in Las Vegas, USA from April 10th to April 12th this year. The Deflector surge protector notifies the user in three ways when it’s time for servicing, setting a new standard for surge protection. Unique rapid-replacement modules make it possible to have the unit up and running again in only a few seconds. DTK-DF120S1 Deflector Series Surge Protector “Power surges are inevitable, and surge protection devices are a solid way to protect your valuable equipment,” said Jason Klein, National Sales Manager, DITEK. “With the Deflector Series, you’ll always know when the surge protection on your critical devices and systems requires immediate attention.” The DTK-DF120S1 Deflector Series Surge Protector is a 120-volt dedicated circuit protection device designed to minimize damage from AC supply voltage spikes by isolating incoming surges that originate from lightning strikes and other sources. Intelligent LED Flash And Sound Notification The Deflector is conveniently wall-mountable, and simple for a licensed electrician to install When the Deflector does its job by absorbing a power surge and stops functioning, the unit sounds a loud audible alarm and an LED flashes, indicating that the module needs to be replaced. Intelligent notification is also available via dry contacts, which can be connected to alarm panels to alert central station monitoring that the module needs replacing. The Deflector is conveniently wall-mountable, and simple for a licensed electrician to install. No additional enclosure is required. Surge Protective Devices (SPD) The Deflector Series is UL 1449 listed as a Surge Protective Device (SPD), as well as UL 1283 listed for EMI/RFI noise filtering. This SPD it to be placed in close proximity to core systems or devices that warrant the highest levels of protection.

DITEK, a provider of surge protection solutions, is displaying their newly improved DTK-RMNETS series of modular network protection products here at GSX 2018 (booth #3857). Designed with state-of-the-art circuitry, the DTK-RMNETS lineup provides superior rack-mounted surge protection for up to 24 shielded Ethernet and PoE connections in a compact 1RU mount - ideal for installations where multiple Ethernet cabling feeds require surge protection before entering network switches. The improved lineup lets installers match the number of connections needed for a project while providing room for easy growth, and supports hybrid protection with a mix of both Ethernet/PoE and PoE Extender circuits within a single rack-mount housing. The complete DTK-RMNETS rack-mount protection product series now includes models with 12, 16 or 24 channels to better match a range of project sizes “The enhanced DTK-RMNETS product line is the next evolution in surge protectors for Ethernet and PoE,” said Jason Klein, National Sales Manager, DITEK. “It provides unmatched value and exceptional protection for networked systems, and is easy to maintain and replace when protection modules have sacrificed. When used in conjunction with our single-channel protectors at the equipment end of the cable runs, users have a comprehensive network protection solution.” Strongest Surge Protection For PoE Connections The flagship of the enhanced lineup is the DTK-RM24NETS, a 24-channel, 1U rack mount device providing the industry’s strongest surge protection for shielded Ethernet and Power over Ethernet (PoE) connections. Compatible with CAT5e, CAT6 and CAT6A cabling infrastructure, it supports data speeds up to 10GbE, offers field- replaceable modules that can be swapped without removing the housing from the rack, and provides surge protection grounding to remote devices when used with STP cabling. PoE Plus and Hi-PoE ready for high-wattage applications, the DTK-RM24NETS complies with IEEE standards 802.3af and 802.3at for PoE surge protection and is enclosed in rugged galvannealed housing. The complete DTK-RMNETS rack-mount protection product series now includes models with 12, 16 or 24 channels to better match a range of project sizes. Along with the new 24-channel model, the company announced improvements to the 12 and 16-channel versions that allow additional modules to be added at any time to support up to 24 channels to accommodate current system needs or future growth. Preserving Functionality Of Electronic Devices The company offers single channel Ethernet/PoE and PoE Extender protectors that are designed to be installed on the device end of the cable to ensure protection at both ends In addition, the rapid replacement modules can now be mixed within a single housing to support hybrid operation with both Ethernet/PoE and PoE Extender circuits, providing even more flexibility for meeting the needs of both new installations and adding protection to current installations. The company also offers single channel Ethernet/PoE and PoE Extender protectors that are designed to be installed on the device end of the cable to ensure protection at both ends. This is recommended practice for externally mounted cameras, and required by the NFPA when a SLC Loop runs between two buildings. “Surge protection is an important preventive step to help preserve the functionality of all types of electronic devices and systems,” added Mr. Klein. “Adding surge protection is an easy, cost-effective measure to ensure that life safety and security devices can do their essential jobs without interruption.”

DITEK, the provider of surge protection solutions, announces the launch of the new Deflector Series Surge Protective Devices. With its audible alarm, flashing LED indicator and remote notification capability, the Deflector lets the user know in three ways when it requires attention. Unique rapid- replacement modules make it possible to have the unit up and running again in only a few seconds. The Deflector is conveniently wall-mountable, with no additional enclosure required, allowing it to be placed in close proximity to core systems or devices that warrant the highest levels of protection. “The Deflector Series makes it even easier to keep fire alarm panels – or any mission- critical 120-volt device not exceeding 20 amps – safe from damage or destruction from power surges,” said Jason Klein, National Sales Manager, DITEK. 120-Volt Circuit Protection Device The DTK-DF120S1 Deflector Series Surge Protector is a 120-volt dedicated circuit protection device designed to minimize damage from AC supply voltage spikes “Up until now, it’s been a problem for users who may not see a visible out-of-service indicator until it’s too late and their equipment has been damaged by a power surge. The Deflector solves that problem with a unique audible alarm that can’t be ignored. In fact, the Deflector can easily protect every product on the GSX show floor. We’d all know immediately if a lightning strike or power surge put it out of commission, and it would take only three seconds to pop in a new module and have it working again.” The first product in the new series, the DTK-DF120S1 Deflector Series Surge Protector is a 120-volt dedicated circuit protection device designed to minimize damage from AC supply voltage spikes by isolating incoming surges that originate from lightning strikes and other sources. The device is simple for a licensed electrician to hardwire into a circuit, with no enclosure or rack required. Intelligent Notification To Alert Monitoring Station Whether it’s a fire alarm panel or a whole rack of servers, our new Deflector Series will best protect every device powered by 120 volts" When the Deflector does its job by absorbing a power surge and stops functioning, the unit sounds a loud audible alarm and an LED flashes, indicating that the module needs to be replaced. Intelligent notification is also available via dry contacts which can be connected to alarm panels to alert central station monitoring that the module needs replacing. “With the Deflector Series, you’ll always know when the surge protection on your critical devices and systems requires immediate attention. When it goes, you’ll hear it and see it, and it’s a true rapid-replacement for the module,” said Klein. “Whether it’s a fire alarm panel or a whole rack of servers, our new Deflector Series will best protect every device powered by 120 volts.” The Deflector Series is UL1449 listed as a Surge Protective Device (SPD), as well as UL1283 listed for EMI/RFI noise filtering.

DITEK, global provider of surge protection solutions, announces the launch of the new Deflector Series Surge Protective Devices. With its audible alarm, flashing LED indicator and remote notification capability, the Deflector lets the user know in three ways when it requires attention. Unique rapid-replacement modules make it possible to have the unit up and running again in only a few seconds. The Deflector is conveniently wall-mountable, with no additional enclosure required, allowing it to be placed in close proximity to core systems or devices that warrant the highest levels of protection. DTK-DF120S1 Deflector Series Surge Protectors The Deflector Series makes it even easier to keep fire alarm panels safe from damage or destruction from power surges" “The Deflector Series makes it even easier to keep fire alarm panels – or any mission-critical 120-volt device not exceeding 20 amps – safe from damage or destruction from power surges,” said Jason Klein, National Sales Manager, DITEK. “Up until now, it’s been a problem for users who may not see a visible out-of-service indicator until it’s too late and their equipment has been damaged by a power surge." "The Deflector solves that problem with a unique audible alarm that can’t be ignored. In fact, the Deflector can easily protect every product on the GSX show floor. We’d all know immediately if a lightning strike or power surge put it out of commission, and it would take only three seconds to pop in a new module and have it working again.” The first product in the new series, the DTK-DF120S1 Deflector Series Surge Protector is a 120-volt dedicated circuit protection device designed to minimize damage from AC supply voltage spikes by isolating incoming surges that originate from lightning strikes and other sources. The device is simple for a licensed electrician to hardwire into a circuit, with no enclosure or rack required. Safety From Power Surges With the Deflector Series, you’ll always know when the surge protection on your critical devices and systems requires immediate attention"When the Deflector does its job by absorbing a power surge and stops functioning, the unit sounds a loud audible alarm and an LED flashes, indicating that the module needs to be replaced. Intelligent notification is also available via dry contacts which can be connected to alarm panels to alert central station monitoring that the module needs replacing. “With the Deflector Series, you’ll always know when the surge protection on your critical devices and systems requires immediate attention. When it goes, you’ll hear it and see it, and it’s a true rapid-replacement for the module,” said Klein. “Whether it’s a fire alarm panel or a whole rack of servers, our new Deflector Series will best protect every device powered by 120 volts.” The Deflector Series is UL1449 listed as a Surge Protective Device (SPD), as well as UL1283 listed for EMI/RFI noise filtering.

DITEK, global provider of surge protection solutions, is displaying their newly improved DTK-RMNETS series of modular network protection products here at GSX 2018 (booth #3857). Designed with state-of-the-art circuitry, the DTK-RMNETS lineup provides superior rack-mounted surge protection for up to 24 shielded Ethernet and PoE connections in a compact 1RU mount - ideal for installations where multiple Ethernet cabling feeds require surge protection before entering network switches. The improved lineup lets installers match the number of connections needed for a project while providing room for easy growth and supports hybrid protection with a mix of both Ethernet/PoE and PoE Extender circuits within a single rack-mount housing. DTK-RMNETS Series The enhanced DTK-RMNETS product line is the next evolution in surge protectors for Ethernet and PoE"“The enhanced DTK-RMNETS product line is the next evolution in surge protectors for Ethernet and PoE,” said Jason Klein, National Sales Manager, DITEK. “It provides unmatched value and exceptional protection for networked systems and is easy to maintain and replace when protection modules have sacrificed. When used in conjunction with our single-channel protectors at the equipment end of the cable runs, users have a comprehensive network protection solution.” The flagship of the enhanced lineup is the DTK-RM24NETS, a 24-channel, 1U rack mount device providing the industry’s strongest surge protection for shielded Ethernet and Power over Ethernet (PoE) connections. Compatible with CAT5e, CAT6 and CAT6A cabling infrastructure, it supports data speeds up to 10GbE, offers field-replaceable modules that can be swapped without removing the housing from the rack, and provides surge protection grounding to remote devices when used with STP cabling. PoE Plus and Hi-PoE ready for high-wattage applications, the DTK-RM24NETS complies with IEEE standards 802.3af and 802.3at for PoE surge protection and is enclosed in rugged galvannealed housing. Ethernet/PoE The complete DTK-RMNETS rack-mount protection product series now includes models with 12, 16 or 24 channels to better match a range of project sizes. Along with the new 24-channel model, the company announced improvements to the 12 and 16-channel versions that allow additional modules to be added at any time to support up to 24 channels to accommodate current system needs or future growth. The rapid replacement modules can now support hybrid operation with both Ethernet/PoE and PoE Extender circuitsIn addition, the rapid replacement modules can now be mixed within a single housing to support hybrid operation with both Ethernet/PoE and PoE Extender circuits, providing even more flexibility for meeting the needs of both new installations and adding protection to current installations. The company also offers single channel Ethernet/PoE and PoE Extender protectors that are designed to be installed on the device end of the cable to ensure protection at both ends. This is recommended practice for externally mounted cameras and required by the NFPA when a SLC Loop runs between two buildings. Surge Protection “Surge protection is an important preventive step to help preserve the functionality of all types of electronic devices and systems,” added Mr. Klein. “Adding surge protection is an easy, cost-effective measure to ensure that life safety and security devices can do their essential jobs without interruption.”

DITEK, a global provider of surge protection solutions, is displaying their new DTK-RM24NETS, a modular, rack-mounted surge protector here at ISC West 2018 (booth #6103). Designed with state-of-the-art circuitry, DTK-RM24NETS provides superior protection for shielded Ethernet and PoE connections and is ideal for installations where multiple Ethernet cabling feeds require surge protection before entering network switches. The DTK-RM24NETS is the next evolution in surge protectors for Ethernet and PoE Cost-Effective Measure “The DTK-RM24NETS is the next evolution in surge protectors for Ethernet and PoE,” said Jason Klein, National Sales Manager, DITEK. “It provides both exceptional value and exceptional protection for networked devices and is easy to maintain and replace when the device has sacrificed.” “Surge protection is an important preventative step to help preserve the functionality of devices and systems,” said Mr. Klein. “Adding surge protection is an easy, cost-effective measure to ensure life safety and security devices can do their essential jobs without interruption.”  Rugged Housing The DTK-RM24NETS is a 24-channel, 1U rack mount surge protector providing the industry’s strongest surge protection for shielded Ethernet and Power over Ethernet (PoE) connections. This surge protector is compatible with CAT5e, CAT6 and CAT6A cabling infrastructure, supports data speeds up to 10GbE, offers field-replaceable modules that can be swapped without removing from rack and provides surge protection grounding to remote devices when used with STP cabling. The DTK-RM24NETS is PoE Plus and HiPoE ready for high-wattage applications and complies with IEEE standards 802.3af and 802.3at for PoE surge protection and is enclosed in rugged galvanneal housing.

DITEK, a provider of surge protection for security devices, is displaying their new DTK-MRJEXTS surge protector here at ISC West 2018 (booth #6103). Designed to be installed on the outputs of PoE extender devices, the DTK-MRJEXTS is a point-of-use surge protector compatible with CAT5e, CAT6 and CAT6A cabling infrastructure. When used with STP cabling, the DTK-MRJEXTS does not require a separate earth ground, allowing for simpler installation.DTK-MRJEXTS is designed to handle data speeds up to 10GbE without signal degradation DTK-MRJEXTS Surge Protector “In the event of a power surge, DTK-MRJEXTS will ensure your PoE extender devices are not damaged or destroyed,” said Jason Klein, National Sales Manager, DITEK. “Our goal is to keep important security devices operational, so that they can do their job to protect you.” The DTK-MRJEXTS is designed to handle data speeds up to 10GbE without signal degradation and is ready for high-wattage applications with PoE+ and Hi-PoE. It contains shielded RJ45 connections with external grounding screw and provides the industry’s strongest surge protection for shielded Ethernet and PoE devices. PoE For Video Surveillance And Access Control “Many organizations are now utilizing PoE extenders for critical systems including video surveillance and access control,” said Mr. Klein. “Since surges tend to spread across networks, it is crucial to protect every device on the network so that there are no interruptions during or after a surge event.”

DITEK announces the debut of the DTK-MRJEXTS surge protector, designed to be installed on the outputs of PoE Extender devices. The DTK-MRJEXTS is a point-of-use surge protector compatible with CAT5e, CAT6 and CAT6A cabling infrastructure, and when used with STP cabling, the DTK-MRJEXTS does not require a separate earth ground, allowing for simpler installation. “The advanced circuitry in the DTK-MRJEXTS provides protection for PoE extender circuits,” said Jason Klein, National Sales Manager, DITEK. “In the event of a power surge, installing this product will ensure your PoE extender devices are not damaged or destroyed and your system will remain operational.” Super-fast Data Speed Without Signal Degradation The DTK-MRJEXTS is designed to handle data speeds up to 10GbE without signal degradation and is ready for high-wattage applications with PoE+ and Hi-PoE. It contains shielded RJ45 connections with external grounding screw and complies with IEEE standards 802.3af and 802.3at for PoE. It can also operate in temperatures from 40°F to 158°F and is offered with a 10-year warranty. “For businesses that make use of PoE extenders for critical systems such as access control or video surveillance, ensuring that those systems do not experience downtime due to a surge event is essential,” continued Mr. Klein. “Surges can spread easily across a PoE network, so protecting your devices helps to protect the entire organization.”

DITEK’s Outdoor Surge Protector for Ethernet Cabling provides a highly effective and cost-efficient solution to protect surveillance and security devices and systems. Featured this week at ASIS 2017 (booth #701), the hardened unit model DTK-MRJPOEX features a NEMA 4X rated enclosure with weatherproof connectors for installation in harsh or outdoor environments. “When an organization experiences a multi-million-dollar loss after a lighting strike because they didn’t have the proper surge protection precautions in place, the benefits of surge protection are quite apparent,” said Jason Klein, National Sales Manager, DITEK. “The addition of our new outdoor Ethernet surge protector should be a no-brainer for organizations with external surveillance and security systems to protect their investment and ensure these critical systems stay up and running.” Multi-Stage Technology And Hybrid Design When used with STP cabling, the DTK-MRJPOEX requires no earth ground and has a field replaceable surge module. Its multi-stage technology and hybrid design provides superior protection for Ethernet devices. It is compatible with CAT5e, CAT6 and CAT6A cabling infrastructure and exceeds the IEEE Standards for PoE. Design features include shielded RJ45 connectors and liquid-tight cord grips. Other specifications include a surge current rating of 20kA/pair; and gigabit data speed with no signal degradation. At ASIS 2017, DITEK will be highlighting the vital importance of protecting security, fire and other building systems from power surges and spikes that can damage or destroy equipment and data. “Loss of security, surveillance and life/safety system operations is costly on many levels,” continued Mr. Klein. “The simple implementation of surge protectors, regardless of the source location, can ensure the continued operation of life/safety and security devices as intended.”