Larson Electronics LLC - Experts & Thought Leaders

Larson Electronics, a Texas-based company with over 40 years of experience spearheading the industrial lighting and equipment sectors, announced the release of an explosion proof network IP camera designed for observation in hazardous locations. This camera is explosion proof, dust proof, ignition proof, weatherproof and tamper resistant providing operators with a live feed from inside tanks, reactors, vessels and more. This camera comes with built-in infrared and a 3-port junction box. Explosion proof network IP camera The EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC explosion proof network IP camera is rated for use in Class I, Divisions 1 and 2, Groups B, C and D; Class I, Zones 1 and 2, Groups IIB+H2 and IIA; Class II, Divisions 1 and 2, Groups E, F and G; Class III, Divisions 1 and 2 hazardous locations. This camera features a built-in 1/3” progressive-scan CMOS image sensor that delivers up to 4.0MP resolution at 20 fps. This camera features a wide-angle lens with an 83-degree field of view to cover large areas. Built-in infrared This camera uses a true day/night IR-cut filter removal to produce clear images in low light conditions Larson Electronics’ explosion proof network IP camera comes with built-in infrared and utilizes 120dB true wide dynamic range and 3D digital noise reduction. This camera uses a true day/night IR-cut filter removal to produce clear images in low light conditions and automatically switches from full colour to IR mode when visible light falls below a certain level. Camera link-up is achieved via a customer-provided RJ45 ethernet cable that is run back to a customer-provided DVR system. To record the stream from the camera a network video recorder (NVR) is required, but live-view is capable without any NVR system via remote access to the camera. A main stream and two sub streams are available for live viewing and each can be configured to different resolutions and frame rates. This camera can be mounted to ceilings and other surfaces or around corners from conduit runs. This unit’s flex coupler is terminated inside an included explosion proof 3-port junction box. This unit comes with one pack of 3/4" EYM seal off and chico/fiber compound mixture for sealing the camera side of the flex coupler. Suitable applications include vessel, tank and reactor monitoring, remote observation of external facilities and more.

Larson Electronics, a Texas-based company with over 40 years of experience spearheading the industrial lighting and equipment sectors, announces the release of a battery-powered intrinsically safe digital camera for use in Class I, Division 1 and ATEX/IECEx rated work sites. This unit is powered by two AA batteries and offers audio and video recording at 3.1 megapixels (2048 x 1536 resolution). This camera is IP65 rated and features autofocus and USB connectivity. The ATX-EXPCMR-BP-HH-QXGA intrinsically safe digital camera is equipped with a 3.39mm lens with autofocus and produces up to 3.1 megapixels at 2048 x 1536 resolution images. Explosion proof camera This explosion proof camera is rated for use in Class I, Divisions 1 and 2, Groups A, B, C, and D hazardous locations. This camera features a two-element optical viewfinder and 68-degree diagonal field of view. The flash on this camera is powered by four LEDs providing 131 lux/seconds of energy at 67 ms exposure. Larson Electronics’ intrinsically safe digital camera handles .wav audio recording format and .jpeg image format. This camera is powered by two AA batteries and is connected using a USB 1.1 only in safe areas and certified for direct connection to a computer without an external protection barrier. This camera is made of anti-static plastic for the housing and anti-static silicone rubber and offers an operating temperature range of -20 degrees C to 60 degrees C. This unit is suitable for observation of external facilities, commercial buildings, hazardous locations and flammable work sites.

Larson Electronics, a Texas-based company with over 40 years of experience spearheading the industrial lighting and equipment sectors, announced the release of an explosion proof digital pan tilt zoom security camera for remote observation in both indoor and outdoor hazardous locations. This day/night camera is high resolution and features a mechanical infrared cut filter and motion detection with up to 64GB of internal storage. The EXPCMR-PT-IP-POE-DPTZ explosion proof digital pan tilt zoom security camera is rated for use in Class I, Divisions 1 and 2, Groups B, C and D; Class I, Zones 1 and 2, Groups IIB+H2 and IIA; Class II, Divisions 1 and 2, Groups E, F and G; and Class III, Divisions 1 and 2 hazardous locations. This unit is made of durable copper-free aluminum and operates on 12V DC while consuming a maximum of 12W per system. This unit also features two 3/4" 14 NPT drilled and tapped conduit openings, one on the top and one on the bottom, for wiring. Equipped with 1.27 mm optical lens The explosion proof security camera is equipped with a 1.27 mm optical lens and produces up to 6.0 megapixel resolutionLarson Electronics’ explosion proof security camera is equipped with a 1.27 mm optical lens and produces up to 6.0 megapixel (3072 x 2048) resolution. Operators can choose from a 150-degree fisheye, 180-degree horizontal panoramic or ePTZ quad view. The camera features two-way audio using a built-in speaker and microphone and is IP66 rated waterproof. This camera can operate in harsh environments with temperatures ranging from -22 degrees F to 140 degrees F and 0% to 95% non-condensing, humid environments. This camera has Power over Ethernet (PoE) enabling data transfers and power to be passed through a single Ethernet cable and features a pole top mount with an attached slip fit yolk for easy installation. Suitable applications for this camera include remote observation of external facilities, indoor and outdoor security, commercial buildings, and more.