10 MP resolution Improved situational awareness Superior WDR, defog and individually controllable 30m IR per sensor Cost-effective with wider field of view, dual-head sensors, 1 network cable, 1 VMS license Corridor mode for an optimized aspect ratio to get less wall and more hall Encrypted data transfer from camera to SD card and VMS NDAA compliant
| Make | Illustra |
|---|---|
| Manufacturer | Illustra |
| Model code | IFS10-M10-OTA4 |
| Chip Inch Size | 1/2.8 |
| Color Type | True Day / Night |
| Resolution | 10MP |
| Sensitivity Lux | Color: 0.13 lux ; B/W: 0.04 lux ; IR on: 0 lux |
| Electrical Specifications |
Voltage: 24 V AC / PoE Power Consumption: IR model: 23.1W / Non-IR model 16.5W |
| Motion Activated | Yes |
| Focal Length mm | 3.42 ~ 6.85 |
| Mount Type | Wall, Pendant, Pole, Corner |
| Wide Dynamic Range | Yes |
| Auto Gain Control | Yes |
| White Balance | Yes |
| Electronic Shutter Range | Automatic, Manual (1/4 to 1/32000 sec) |
| Zoom | Yes |
| Compression Type | H.264/H.265/MJPEG H.264 IntelliZip® / H.265 IntelliZip® |
| Network Properties |
Interface: IEEE 802.3, 10/100Base-T Ethernet, RJ45, auto sensing Network Protocols: TCP/IP, IPv4, IPv6, TCP, UDP, HTTP, FTP, DHCP, WS-Discovery, DNS, DDNS, RTP, RTCP, RTSP, TLS, Unicast, Multicast, NTP, ICMP, IGMP, SMTP, WS-Security, IEEE 802.1x, PEAP, EAP-TLS, EAPoL, SSH, HTTPS, SOAP, WS-Addressing, CIFS, UPNP, LLDP, QoS, SIP, ARP, EAP- |
| Physical Specifications |
Dimensions mm: 220 x 123 x 93.8 Weight g: 1200 |
| Environmental Specifications |
Protection: IP66/67, IK10 Operating Temperature oC: -40 ~ +60 C (-40 ~ +140 F) Operating Humidity %: up to 95% RH, Non-Condensing |
| Additional info |
|