The 2100 Reader Inhibitor Module is used to disable a reader attached to the PAC 2100/1100 door controllers under certain conditions. It is designed to plug directly into a reader channel on the door controller and can be operated by anything which supplies a switching 12V (e.g. an alarm panel, mechanical switch etc.) at 20mA. A Reader Inhibitor is required for each reader to be disabled. When activated the Sig and RTE to the reader are broken and the reader disabled. Overrides such as breakglasses are not affected. Located in the door controller enclosure or other secure location. Five year guarantee against electronic failure.
| Make | PAC |
|---|---|
| Manufacturer | PAC International, Ltd |
| Model code | 21098 |
| Series | PAC Series |
| Physical Specifications | Dimensions mm: 57 x 53 x 60 |
| Accessories | Reader inhibitor module for PAC systems |
| Additional info | The 2100 Reader Inhibitor Module is used to disable a reader attached to the PAC 2100/1100 door controllers under certain conditions. It is designed to plug directly into a reader channel on the door controller and can be operated by anything which supplies a switching 12V (e.g. an alarm panel, mechanical switch etc.) at 20mA. A Reader Inhibitor is required for each reader to be disabled. When activated the Sig and RTE to the reader are broken and the reader disabled. Overrides such as breakglasses are not affected. Located in the door controller enclosure or other secure location. Five year guarantee against electronic failure. |