PAC Access Control Readers(14)
Browse Access Control Readers
- Keypad Integrated
- Long Range
Access control reader products updated recently
Motion detection is a key feature of security systems in residential and commercial environments. Until recently, systems have relied heavily on closed circuit television (CCTV) and passive infrared (PIR) sensors, which both require significant investment and infrastructure to install and monitor. Developments in wireless technology are increasing home security possibilities. Few years ago, these developments led Cognitive Systems to discover that the wireless signals surrounding oneself can be used to detect motion. Known in the wireless industry as WiFi sensing, this technology brings many benefits that other motion detection solutions have not been able to provide. The working of WiFi sensing At Cognitive Systems, the company has used WiFi sensing technology to develop a motion detection solution called WiFi Motion™, which measures and interprets disruptions in RF signals transmitted between WiFi devices. When movement occurs in a space, ripples in the wireless signals are created. WiFi Motion interprets these ripples and determines if an action, such as sending a notification, is needed. Enabling this functionality in a space is incredibly simple. With a software upgrade to only one’s WiFi access point (or mesh router), motion sensing capabilities are layered into one’s WiFi network. Existing connected WiFi devices then become motion detectors without detracting from their original functions or slowing down the network. Using artificial intelligence (AI), WiFi Motion establishes a benchmark of the motionless environment and learns movement patterns over time, which could be used to predict trends. This allows unusual movement patterns to be detected with greater accuracy while decreasing the potential for costly false alerts. WiFi Motion requires no line-of-sight or installation WiFi sensing and other home monitoring solutions All of these capabilities are made possible by WiFi sensing and together create a motion detection system that provides unparalleled accuracy, coverage, privacy and affordability compared to other solutions on the market. PIR integration is far more complex and imposes electronic and physical design restrictions compared to WiFi sensing. In terms of placement, PIR systems are difficult to install, requiring line-of-sight and a device in every room for localization. WiFi Motion requires no line-of-sight or installation and is also a scalable solution compared to PIR. Much like cameras, PIRs can only cover so much space, but WiFi Motion can cover the entire home and even detect motion in the dark and through walls, without adding additional devices to the home. WiFi Motion detects less distinguishing context than cameras and microphones, but more context than regular PIR sensors for the perfect balance of privacy and highly accurate motion detection. Privacy solution While cameras have been the security solution for years, WiFi Motion offers a more affordable solution that can rival the privacy and coverage capabilities of even the most high-end cameras. With such a wide coverage area, one might think that WiFi sensing infringes on privacy, but actually, the opposite is true. With WiFi Motion, the contextual information collected cannot be used to identify a specific individual, unlike cameras which can clearly identify a person’s face or microphones, which can identify a person’s voice. It is different from other smart home security options that use cameras and microphones because it only senses motion using WiFi signals - it doesn’t “see” or “listen” like a camera or microphone would. This provides opportunities for added security in spaces where privacy might be a concern and installing a camera may not be a comfortable solution, such as bathrooms and bedrooms. The data collected is also anonymized and highly encrypted according to stringent industry privacy standards. Existing connected WiFi devices then become motion detectors Additional WiFi sensing applications Since WiFi sensing technology requires no additional hardware or subscription fees, it is much more affordable than other motion detection solutions. It can be used as a standalone solution, or it can be easily layered into more complex systems. This ease of integration, scalability and relatively low cost brings a lot of potential for various applications. Motion detection can trigger other smart devices in the network to turn lights on or off In eldercare, for example, WiFi sensing can be used to help seniors live comfortably in their homes for as long as possible. With the increasing aging population and high costs associated with care homes, the market for this application is considerable. Caregivers can use an app to monitor movement in their loved one’s home and be alerted about unusual movement patterns that could indicate a concern. For smart homes and other environments that have a network of smart devices, the artificial intelligence (AI) component of the technology allows for improvements to automated features. Motion detection can trigger other smart devices in the network to turn lights on or off or make adjustments to the temperature in a room. Security for the commercial sector For office buildings and other commercial properties, it is easy to see how all of these features could be scaled up to offer a highly accurate and cost-effective motion sensing and smart device automation solution. Cognitive Systems is closely involved with the development of WiFi sensing technology, working with various industry groups to establish standards and help it reach its full potential. WiFi Motion is merely the tip of the iceberg in terms of motion sensing possibilities, but its applications in the world of security are undeniably compelling. It is an exciting time for the wireless industry, as one works with stakeholders in the security space to explore everything this technology can do.
The emergence of smartphones using iOS and Android is rapidly changing the landscape of the IT industry around the world. Several industries, such as digital cameras, car navigation, MP3, and PNP, have been replaced by equivalent or even better performance using smartphones. Smartphones provide increasing portability by integrating the functions of various devices into a single unit which allows them to connect to platforms with network-based services and offer new services and conveniences that have never been experienced before. These changes have expanded into the access control market. Although not yet widespread, ‘Mobile access cards’ is one of the terminologies that everyone has been talking about. RF cards used for access security are being integrated into smartphones just as digital cameras and MP3s were in the past. While people might forget their access cards at home in the morning, they seldom forget their smartphones. Using smartphones for access control increases entry access reliability and convenience. Mobile/smartphone access control A key aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction As in other markets, the combination of smartphones and access cards is creating a new value that goes beyond the simple convenience of integration enhancing the ability to prevent unauthorized authentication and entrance. People sometimes lend their access cards to others, but it is far less likely they might lend their smartphone with all their financial information and personal information – to another person. This overcomes an important fundamental weakness of RF cards. Another valuable aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction. Under existing access security systems, cards must be issued in person. Since card issuance implies access rights, the recipient’s identification must be confirmed first before enabling the card and once the card has been issued, it cannot be retracted without another separate face-to-face interaction. Mobile access cards In contrast, mobile access cards are designed to transfer authority safely to the user's smartphone based on TLS. In this way, credentials can be safely managed with authenticated users without face-to-face interaction. Mobile cards can be used not only at the sites with a large number of visitors or when managing access for an unspecified number of visitors, but also at the places like shared offices, kitchens and gyms, currently used as smart access control systems in shared economy markets. The market share of mobile access cards today is low even though the capability can offer real benefits to users and markets. While the access control market itself is slow-moving, there are also practical problems that limit the adoption of new technologies like mobile access cards. Use of Bluetooth Low Energy technology While NFC could be an important technology for mobile credential that is available today on virtually all smartphones, differences in implementation and data handling processes from various vendors prevents universal deployment of a single solution to all devices currently on the market. Accordingly, Bluetooth Low Energy (BLE) has been considered as an alternative to NFC. Bluetooth is a technology that has been applied to smartphones for a long time, and its usage and interface are unified, so there are no compatibility problems. However, speed becomes the main problem. The authentication speed of BLE mobile access card products provided by major companies is slower than that of existing cards. Enhancing credential authentication speed Authentication speed is being continuously improved using BLE's GAP layer and GATT layers The second problem is that mobile access cards must be accompanied by a supply of compatible card readers. In order to use mobile access cards, readers need to be updated but this is not a simple task in the access control market. For 13.56 MHz smart cards (which were designed to replace 125 kHz cards), it has taken 20 years since the standard was established but only about half of all 25 kHz cards have been replaced so far. Legacy compatibility and the need for equivalent performance, even with additional benefits, will drive adoption timing for the Access Control market. While BLE technology helps resolve the compatibility problem of mobile access cards, it can identify some breakthroughs that can solve the speed problem. Authentication speed is being continuously improved using BLE's GAP layer and GATT layers, and new products with these improvements are now released in the market. Making use of key improvements allows Suprema's mobile access card to exhibit an authentication speed of less than 0.5 seconds providing equivalent performance to that of card-based authentication. AirFob Patch MOCA System's AirFob Patch addresses the need for technological improvements in the access control market in a direct, cost effective, and reliable way – by offering the ability to add high-performance BLE to existing card readers – enabling them to read BLE smartphone data by applying a small adhesive patch approximately the size of a coin. This innovative breakthrough applies energy harvesting technology, generating energy from the RF field emitted by the existing RF reader – then converting the data received via BLE back into RF – and delivering it to the reader. By adding the ability to use BLE on virtually any existing RF card reading device, MOCA allows greater ability for partners and end users to deploy a technologically-stable, high performance access control mobile credential solution to their employees, using devices they already own and are familiar with. Adding MOCA AirFob Patch eliminates the need to buy and install updated readers simply to take advantage of mobile credential, lowering costs and risks, and increasing employee confidence and convenience. Growth forecast of mobile access card market in 2020 In 2020, forecasts show that the mobile access card market will grow far more rapidly Several companies have entered the mobile access card market, but they have not set up a meaningful product solution stream until 2019. In 2020, forecasts show that the mobile access card market will grow far more rapidly. Reviewing new entries into the market allows identification of the latest products that provide improving solutions to compatibility and speed problems. MOCA AirFob Patch addresses development plans in process today that overcome the legacy installed base of card readers – allowing rapid creation of an environment that can make immediate use of BLE mobile access cards. Integrated mobile digital ID With proven usability and within suitable environments, mobile access cards will also begin to make inroads into other markets, not just the access control market. In the sharing economy market, which seeks access management without face-to-face interaction, the integrated mobile digital ID led by the 'DID Alliance' will serve as a technical tool that can be used in access authentication – forging increasing links between the access control and digital ID markets.
Entrance control and access control - of the physical kind - are common terms in the security industry which are often used interchangeably, but should they be? Having worked both sides of the fence, with previous roles at TDSi and HID and now the Major Accounts and Marketing Manager at Integrated Design Limited, Tony Smith highlights the subtle but important differences between these two terms and the systems they refer to, outlining how they should work together to achieve optimal security. Access control is a system which provides discriminating authentication Access control provides a discriminating authentication process and comprises the software or hardware that defines the criteria for acceptance or denial Used to describe a system which performs identification of users and authentication of their credentials (deciding whether or not the bearer of those credentials is permitted admission) access control is an incredibly broad term. Access control provides a discriminating authentication process and comprises the software or hardware that defines the criteria for acceptance or denial of an individual to a restricted area. Entrance control – such as security turnstiles - takes the output of that validation and has the capability to see whether that criteria is being adhered to, either granting or denying access as appropriate. Entrance control is the hardware responsible for keeping people honest If access control verifies authorized personnel using their credentials – their face, fingerprints, PIN number, fob, key card etc – and decides whether or not they are permitted access, entrance control is the hardware which enforces that decision by making users present their credentials in the correct way, either opening to allow pedestrian access or remaining closed to bar entry and potentially raising an alarm. For example, a card reader acts as an access control device, recognizing the card holder as having the correct permissions and saying ‘yes, this person can pass’. But, it’s the entrance control system – a turnstile, for example – which actually physically allows or denies access. Physical access and video surveillance Some entrance control systems don’t feature a physical barrier, however. Fastlane Optical turnstiles will not physically stop an unauthorized person from passing through, and instead alarm when someone fails to present valid credentials, alerting security staff that a breach has occurred. These kinds of turnstiles are suited to environments which just need to delineate between the public and secure side of an entrance, with less need to physically prevent unauthorized users from entering. State of the art access control integrations have been installed for award-winning complex, The Bower It’s also possible to capture video footage of any incidents, allowing security personnel to identify users failing to abide by the access control system’s rules, using It’s also possible to capture video footage of incidents, allowing security personnel to identify users failing to abide by access control system rules the footage to decide on the level of response required. The breach could have been the result of a member of staff being in a hurry and failing to show their card before passing through, in which case they can be reminded about the security protocol. Or, it could be an unidentified person who needs to be escorted from the premises. Entrance control and access control working together For optimum security, access control and entrance control should work together, with the entrance control system enhancing the use of the access control system, making it more efficient and better value for money. The two can’t effectively operate without each other. Security turnstiles, for example, require something to tell them that someone is about to enter – the access control system does this – and, the access control system needs a method of stopping people when they don’t badge in correctly. The two systems are complementary.
3xLOGIC, PAC/GDX and PACOM, providers of security and access control solutions, have announced they will be exhibiting on stand IF2930 at IFSEC International 2019, which takes place on 18th-20th June at ExCeL, London. For over 15 years as one of the USA’s most respected innovators in server, cloud and artificial intelligence-based solutions, 3xLOGIC has an enviable track record in redefining what’s possible with security technology. After successfully launching into the European market earlier this year, 3xLOGIC will exhibit its diverse range of cutting-edge products as well as demonstrate their integration capabilities. Leading the way is the integration of 3xLOGIC’s NVRs and standalone cameras into PACOM’s GMS and Unison product lines. VIGIL Enterprise Grade VMS 3xLOGIC’s VIGIL enterprise grade VMS is the driving force behind the VIGIL range of NVRs, DVRs and PoE cameras3xLOGIC’s VIGIL enterprise grade VMS is the driving force behind the VIGIL range of network video recorders (NVRs), digital video recorders (DVRs) and Power over Ethernet (PoE) cameras. To further enhance VIGIL’s suitability for multi-site environments, it has been integrated with the PACOM Graphical Management System (GMS). Engineered to communicate over an IP network, the PACOM GMS allows for full integration of access control, alarm monitoring, video surveillance and many other security functions. 3xLOGIC’s Visix Facial Recognition camera is making its European debut at IFSEC 2019. This special purpose, low cost, dual lens 2MP device is designed for instant face detection, and the identification and notification of persons of interest. Using camera-based analytics and 3xLOGIC’s exclusive facial recognition software and mobile app, users can review images and choose which individuals to place on a watch list. Unison Security Management Furthermore, 3xLOGIC’s Facial Recognition camera has recently been integrated into PACOM’s Unison security management platform. An open security solution designed specifically for campus-based organizations, Unison is the solution of choice for organizations within vertical sectors such as healthcare, universities, commercial buildings, public facilities, municipalities, airports, shipping ports and data centers. The combination of Facial Recognition capabilities with Unison improves operational efficiency by quickly and accurately identifying persons of interest, and streamlining processes to use this information to meet the organization’s security and marketing goals. TRENDS empowers the user to interpret vast amounts of disparate data more effectively and efficiently than ever before For those looking to optimize organizational efficiency, 3xLOGIC’s TRENDS cloud-based business intelligence tool incorporates exception-based reporting, video data and third-party applications into an easy to use dashboard that provides a simple visual snapshot of business operations. TRENDS empowers the user to interpret vast amounts of disparate data more effectively and efficiently than ever before, offering unrivalled levels of visibility to quickly spot issues and liabilities that can seriously impact a company’s bottom line. Bluetooth-Based Card Reader Last, but certainly not least, visitors will have the chance to get hands on with the new PAC GDX Bluetooth-based card reader technology, which has been specifically designed to meet the requirements of companies of all sizes that want the most secure access control solution possible. Experts from the company will be available for product demonstrations and to discuss a new online training program that has been developed to enable installers and end users to get the very best out of their PAC GDX solution. “It has been a tremendously exciting year, and we are looking forward to discussing our activities with those attending IFSEC,” commented Matt Kushner, Global President, Stanley Products and Solutions. “With a combined legacy of over 100 years in the security industry, 3xLOGIC, PAC GDX and PACOM lead the way in the design and manufacture of video surveillance, access control, and business intelligence solutions. By visiting Stand IF2930 and talking to our experts, visitors have a fantastic opportunity to find out how our technology can enhance security provision in a diverse range of built environments and how we can help them achieve their operational and security objectives.”
3xLOGIC, Inc., global provider of integrated, intelligent security solutions, and a three-time Deloitte Technology Fast 500 winner, announced that the company has added to its growing North American sales network, along with other personnel moves at its umbrella company, Stanley Products and Solutions (SPS). The company added two new RSMs to further penetrate key markets in the Pacific NW as well as the Mid-Atlantic regions and appointed a new Marketing Manager for the PACOM brand of products. 3xLOGIC Adds Security Expert 3xLOGIC welcomes Joel Dombovy as a Regional Sales Manager (RSM) in the Northwest 3xLOGIC welcomes Joel Dombovy as a Regional Sales Manager (RSM) in the Northwest. Joel comes to the company with 14 years of security industry experience, working with companies such as Interlogix, GE Security, and Honeywell. John Saxen will support Joel as the Inside Sales Account Manager for the region. Jake Franklin takes over as RSM for the Mid-Atlantic. He joins the company from RF Technologies, a safety solutions company in healthcare where he was RSM for the Northeast. Prior to that, he worked as Critical Infrastructure Account Manager & Sales Representative at a security integration company. Jake’s passion for technology and previous security experience make him an excellent addition to 3xLOGIC’s powerful sales team. Bill Hobbs, Global VP of Sales for SPS, announced that both Joel and Jake will report to Jason Bryan, Director of Sales. PACOM Expands Marketing Team Jennifer Joyce is the new Marketing Manager for PACOM, sister company of 3xLOGIC, as the company continues to expand efforts in the North American to market the wide range of PACOM solutions that have found success all over the world. She brings more than 25 years of marketing and design experience to the team. Her global marketing experience began with Firestone Industrial Products and Jennifer most recently spent her time in digital marketing as Marketing Director for Orbis Education. She will report to Suzi Abell, Senior Director of Global Marketing, SPS. Gavin O’Keeffe has been promoted to Director of Product Management Elsewhere in the larger SPS organization Charlie Erickson has a new title reflecting his growing responsibilities—Chief Technology Officer. He continues to oversee Product Management as his team continues to expand. Reporting directly to Charlie, Michael Poe has been promoted to Director of Product Management. He will be leading the Video, Blue, DIY, and TRENDS products lines. Rick Walker will be aligned under Poe’s leadership. New PAC, PACOM, infinias Head Also reporting to Charlie, Gavin O’Keeffe has been promoted to Director of Product Management, and he will be leading the PAC, PACOM, infinias, and Sonitrol product teams. We also welcome Darren Monroe, Product Manager for infinias to Gavin’s team. Darren will work in the 3xLOGIC office in Indianapolis and Gavin works out of the PACOM Australia office. Drew Alexander continues as Sr. Director of Program Management, and he will continue to add Program Managers to his team to facilitate a growing list of product launches and business initiatives.
3xLOGIC, the provider of integrated and intelligent security solutions, has announced the availability of its pioneering VIGIL video management system (VMS) in Europe. Already enormously popular in the USA, 3xLOGIC aims to replicate this success and is targeting VIGIL at those who want all the power of integrated video and access control, without the stress and cost of a complex set-up. VIGIL’s enterprise grade VMS is the driving force behind the VIGIL range of network video recorders (NVRs) and power over Ethernet (PoE) cameras. Its easy set-up wizard guides installers and end users through the configuration process, helping to define network parameters, system identification information and camera profiles quickly and efficiently. VIGIL Central Management Software With 3xLOGIC’s VCM, it is possible to monitor server connectivity, camera status, storage details and server settingsEvents can be viewed via PC or mobile app, allowing users to respond to alarms and view live footage from any location, while SmartSearch functionality enables individuals to quickly identify and review events. With 3xLOGIC’s VIGIL Central Management software (VCM), it is also possible to monitor server connectivity, camera status, storage details and server settings; and 3xLOGIC’s RapidStream technology and SubStream motion detection functionality offers high resolution while substantially reducing bandwidth demands All VIGIL NVRs come pre-configured with VIGIL VMS software and 3xLOGIC PoE-enabled internet protocol (IP) dome, bullet, cube, 360°, thermal imaging, and pan tilt zoom (PTZ) cameras are designed to suit any application. The easy set-up wizard also provides plug and play capability for easy deployment, so no IP video experience is necessary to start recording or viewing video. Integrated With Infinias Access Control Solution Advanced reporting features including heat mapping, restricting and locking video are also possibleUsers can easily narrow down points of interest within larger playback clips by creating a SmartSearch mask over an area of an image, and surveillance data can also be routinely archived without the need to perform the task manually. Advanced reporting features including heat mapping, restricting and locking video are also possible. End users are increasingly demanding integrated VMS and access control. VIGIL can be seamlessly integrated with 3xLOGIC’s cutting edge infinias access control solution, which is designed to easily manage any size of project ranging from a single door to an enterprise-wide installation of hundreds of doors. With no wires from VIGIL to infinias, configuration is carried out through software with an automated, cloud-based programming tool. This offers a cost-effective way to create one intuitive solution where video is automatically linked with access control events and alarms. New Revenue Stream For Installers VIGIL opens up a new revenue stream for installers that work primarily with small to medium-sized enterprises Offering a level of functionality previously only available in solutions designed for larger projects, VIGIL removes the need for expensive technical labour. It therefore opens up a new revenue stream for installers that work primarily with small to medium-sized enterprises (SMEs), or who wish to start offering an integration based service. VIGIL is available through the existing PAC channel, with full access to its technical support, meaning that customers can rely on a tried and trusted supply chain that delivers products on time, every time. “The response to 3xLOGIC’s presence in Europe has been phenomenal,” commented David Hughes, the company’s global product manager. “The availability of VIGIL is the next step in our strategy to redefine the way in which security systems are designed, specified and configured across the continent. “Suitable for almost any budget, VIGIL is designed to be fully integrated to provide SMEs with comprehensive, cost effective and state-of-the-art video and access control infrastructures that are easy to manage, simple to install and can scale in line with changing needs.”
Related white papers
Physical Access Control In Higher Education
5 Reasons To Integrate Mobile Technology Into Your Security Solution
11 Considerations For Embedded System RFID Readers
Security Investments Retailers Should Consider For Their 2021 BudgetDownload
Cyber Security and High Security in a Business Integrated WorldDownload
Market Report: Cannabis At A GlanceDownload
Nedap Solutions Provide Vehicle Access To Employees And Long-Term Tenants At Business Park In Saudi Arabia
- WLS Installs Electronic Safety And Security Systems At The Hudson Office Building
- Nedap Solutions Provide Vehicle Access To Employees And Long-Term Tenants At Business Park In Saudi Arabia
- Idesco Access Control Chosen By RYS In Integration At Residential Building In Slovakia
- Idesco Transparent Readers Secure Site And Equipment Access At Construction Sites