The NVT Model NV-413A Video Transceivers are passive (non-amplified) device that allows the transmission of real-time monochrome or colour video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Supports screw-terminal or RJ45 UTP video inputs. Built-in transient protection. Supports "up-the-coax" type control signal up to 750 ft. Transmit up to 750 ft, 3000 ft with an active receiver.
| Make | NVT Phybridge |
|---|---|
| Manufacturer | NVT Phybridge |
| Model code | NV-413A |
| Transmission type | UTP / CAT 5 |
| Video Inputs | 4 |
| TX/RX | TX/RX |
| Telemetry Control | Yes |
| Pre & Post Alarm Image Buffer | Yes |
| Video Outputs | 4 |
| Transmission Range m | 1000 |
| Physical Specifications |
Weight g: 340 Dimensions mm: 184 x 60 x 41 |
| Environmental Specifications | Operating Temp oC: -20 ~ +75 |
| Additional info |
The NVT Model NV-413A Video Transceivers are passive (non-amplified) device that allows the transmission of real-time monochrome or colour video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Supports screw-terminal or RJ45 UTP video inputs. Built-in transient protection. Supports "up-the-coax" type control signal up to 750 ft. Transmit up to 750 ft, 3000 ft with an active receiver. |