The DX3100 Series Digital Video Recorder offers maximum performance and reliability through its embedded operating system. A complete set of front-panel controls and handheld infrared (IR) controller complement the equally functional remote software. Virtually every function accessible from the front panel is also operational from the included IR controller. An optional external IR receiver can be connected to the back of the DX3100, which allows the unit to be mounted in a different room up to 50 feet away and still be controlled by the IR remote. Multiple DX3100 units mounted in close proximity can be controlled from a single remote by using the ID per Recorder and ID Quick-Change features of the IR remote.
Make | Pelco |
---|---|
Manufacturer | Pelco, Inc |
Model code | DX3116-060 |
Series | DX3100 Series |
Channels | 16 |
Recording Mode | Real time / Timelapse / Event |
Monitor Outputs | 1 |
Inbuilt Multiplexer | Yes |
Multiplexer Type | Duplex |
Storage Capacity GB | 60 |
Image per second (IPS) | 25(PAL) / 30(NTSC) |
Compression Type | Enhanced MPEG |
Resolution | 640 x 240 |
Signal Mode | PAL / NTSC |
Recording System | HDD |
Mount type | 16 in, 1 out |
Network Type | TCP/IP, LAN, WAN |
IP Ready | PTZ |
Physical Specifications |
Dimensions mm: 88 x 440 x 465 Weight kg: 10.67 kg |
Electrical Specifications | Power Consumption: 60 |
Environmental Specifications |
Operating Temp oC: 5 ~ 40 Operating Humidity %: 80% |
Additional info | The DX3100 Series Digital Video Recorder offers maximum performance and reliability through its embedded operating system. A complete set of front-panel controls and handheld infrared (IR) controller complement the equally functional remote software. Virtually every function accessible from the front panel is also operational from the included IR controller. An optional external IR receiver can be connected to the back of the DX3100, which allows the unit to be mounted in a different room up to 50 feet away and still be controlled by the IR remote. Multiple DX3100 units mounted in close proximity can be controlled from a single remote by using the ID per Recorder and ID Quick-Change features of the IR remote. |