The Honeywell HCD544PVX true day/night camera is ideally suited for use in 24/7 surveillance applications. The HCD544PVX adapts to varying lighting conditions to ensure the highest quality picture even in very low light. When the light level drops too low for accurate video identification in colour, the camera automatically moves the IR cut filter out of the optical path and then switches to black and white video to capture more detail using the increased sensitivity of the CCD to IR light. The camera uses internal logic or an external LAMP connector to control the switchoverfrom colour to black and white. This improves the reliability of the operation of the camera in difficult installations or lighting conditions.
| Make | Honeywell Security |
|---|---|
| Manufacturer | Honeywell |
| Model code | HCD544PVX |
| Chip Inch Size " | 1/3 |
| Color Type | Color / Monochrome |
| Resolution TVL | 540 |
| Digital (DSP) | Yes |
| Auto Iris | Yes |
| Sensitivity lux | 0.1 @ F1.2 |
| Direct Drive | Yes |
| Lens Mount | C/CS |
| Electrical Specifications |
Voltage: 12 V DC, 24 V AC Power Consumption: 4.5 W |
| Focal Length mm | 5.0 ~ 50 |
| Mount Type | Wall / Ceiling |
| Picture Elements HxV | 752 x 582 |
| Back Light Compensation | Yes |
| Auto Gain Control | Yes |
| White Balance | Yes |
| Electronic Shutter range | 1/50 ~ 1/100,000 |
| S/ N (Signal/ Noise) Ratio dB | 50 |
| Synchronisation | Line-lock |
| Signal Mode | PAL |
| Video Output | 1 Vp-p, 75 Ohms |
| Physical Specifications | Weight g: 500 |
| Environmental Specifications |
Operating Temperature oC: -10 ~ +50 Protection: Weather Resistant Operating Humidity %: 0 ~ 85 |
| Additional info | The Honeywell HCD544PVX true day/night camera is ideally suited for use in 24/7 surveillance applications. The HCD544PVX adapts to varying lighting conditions to ensure the highest quality picture even in very low light. When the light level drops too low for accurate video identification in colour, the camera automatically moves the IR cut filter out of the optical path and then switches to black and white video to capture more detail using the increased sensitivity of the CCD to IR light. The camera uses internal logic or an external LAMP connector to control the switchoverfrom colour to black and white. This improves the reliability of the operation of the camera in difficult installations or lighting conditions. |