Doorking 1815‐333 DK Prox Readers

Technical Specification

Features:
  • Make: Doorking
  • Model code: 1815‐333
  • Reader Type: Proximity
  • Reader Output format: 26-bit wiegand
  • LED / Beep: 2 color LED (Red, Green), Piezo Beeper
Additional info:

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free.   There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

Make Doorking
Manufacturer DoorKing, Inc.
Model code 1815‐333
Reader Type Proximity
Reader Output format 26-bit wiegand
LED / Beep 2 color LED (Red, Green), Piezo Beeper
Wiegand Interface Yes
Electrical Specifications Voltage: 12 V DC
Additional info
  • Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal.
  • Proximity card readers are maintenance free.   There are no parts to wear out or adjust.
  • Passive card technology provides an unlimited number of "card reads" with no battery to wear out.
  • Passive cards, unless they are physically abused, will last virtually forever.
  • Clamshell, ISO Graphic and KeyTag type cards are available.
  • Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application.
  • These card readers output their data in 26-bit wiegand format.
  • Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages.
  • These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

Related Whitepapers