ComNet Security management

ComNet CWFE2SCM2 ethernet media converter is designed to transmit and receive 10/100 Mbps data over multimode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The media converter is commercial grade for light industrial use.

ComNet CNGE2MCPOEM 2 port ethernet media converter is designed to transmit and receive 10/100/1000 Mbps data over optical fiber through user selectable SFP modules. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 1000 Mbps. It is environmentally hardened to operate in extreme conditions. The LED indicators are provided for confirming equipment operating status.

ComNet CNFE2MC2C ethernet media converter transmits and receives 10/100 Mbps data and two bi-directional contact closures over multimode or single mode optical fiber using SFP modules to select distance and connector type. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFE2MC2C media converters is environmentally hardened to operate in extreme temperatures.

ComNet FDC1M single channel fiber break detector is designed to detect and report a breakage or the loss of optical signal in either multimode fiber plants. Featuring a self-contained transmitter and receiver, the unit provides an optical output that is transmitted continuously through a customer-furnished fiber loop, where it returns to the internal receiver section. Should the optical path be lost through a deliberate or unintentional breakage of the fiber, relay contacts in the modem immediately change their state and report the loss of optical signal.

ComNet FVR21/LV dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The unit incorporates a “Loss of Video” relay for each channel. Upon loss of video signal or optical fiber break, the normally closed relay opens. The module is ideal for CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. The module utilizes Manual Gain control.

ComNet FVT/FVR40SFP optical video link provides four 10-bit medium-haul quality digital video channels, using optical small form factor pluggable modules (SFP). Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. This unit is interchangeable between stand-alone or card mount configurations.

ComNet FVT/FVR8SFP2R optical video link provides eight 10-bit medium-haul quality digital video channels, eight bi-directional data channels and has dual optical (SFP) ports to provide a redundant Point-to-Point topology. The redundant Point-to-Point topology using the dual optical ports provide fail safe operation in the event of loss of one fiber or one optical module. Each port accepts a wide variety of SFP modules.

ComNet FVT/FVR80D4SFP optical video link provides transmission of eight 10-bit short-haul quality digital video channels and four bi-directional data channels through a selectable small form factor pluggable module (SFP). The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVT/FVR80D8SFP optical video link provides transmission of eight 10-bit short-haul quality digital video channels and eight bi-directional data channels through a selectable small form factor pluggable module (SFP). The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVT/FVR40D4SFP optical video link provides transmission of four 10-bit medium-haul quality digital video channels and four bi-directional data channels through a selectable small form factor pluggable module (SFP). The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. This unit is interchangeable between stand-alone or card mount configurations.

ComNet CLFE1COAX is a 1 port coax ethernet extender that transmits individual Ethernet data channels with Pass-through Poe over standard coaxial cable. The extender extends Ethernet up to 1524 m over coaxial cable. The extender's high-data rate is ideal for the high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems, and cameras requiring jumbo frame transmission. The Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance.

ComNet FVT41M1 video transmitter transmits four channels of video over one optical fiber utilizing state-of-the-art digital encoding and decoding for high-quality video transmission. The unit is ideal for use in unconditioned roadside or out-of-plant installations. The unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVT812S1 video transmitter/data transceiver transmits eight channels of video utilizing state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode optical fiber. The FVT812M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT412M1 video transmitter/data transceiver transmits four channels of video utilizing state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data over one multimode optical fiber. The FVT412M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT/FVR1014(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilize 10-bit digital encoding and decoding for high-quality video transmission. It meets the requirements of EIA RS-250C for short-haul video transmission. It provides transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. it is interchangeable between stand-alone or card mount configurations.

ComNet FDC10M1(A) contact closure transceiver provides bi-directional transmission of contact closure over one multimode optical fiber. The bi-directional contact closure module has two relay outputs and one relay input. One relay output follows the “relay input” at the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. The second relay output is closed when “carrier” is detected from the remote end, this indicates that the optical fiber is connected and that the remote end has power and is operating.

ComNet FVT812M1 video transmitter/data transceiver transmits eight channels of video utilizing state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one multimode optical fiber. The FVT812M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT/FVR160D8S1 10 bit digitally encoded video transmission transmits 16 real-time / full frame color video signals and 8 bi-directional data signal over one optical fiber. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR160D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

ComNet FVT200D8S1 video transmitter/data transceiver transmits 20 real-time / full frame color video signals and 8 bi-directional data signal over one optical fibrer The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT200D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

ComNet FVT412S1 video transmitter / data transceiver transmits four channels of real-time color video utilizing state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data, and one-directional contact closure over one single mode optical fiber. The FVT412S1 is compatible with NTSC, PAL and SECAM CCTV camera systems and supports RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the critical operating parameters.

ComNet FVT/FVR240D8S1 10 bit digitally encoded video transmission transmits 24 real-time / full frame color video signals and 8 bi-directional data signal over one optical fiber. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR240D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

ComNet FVT/FVR280D8S1 10 bit digitally encoded video transmission transmits 28 real-time / full frame color video signals and 8 bi-directional data signal over one optical fiber. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR280D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

ComNet CNVETX1 is a single-channel, camera-ready H.264/MPEG-4/MPEG-2, and MJPEG intelligent video server/video encoder or decoder unit, with video quality of up to D1 at 1 to 30 FPS, and dual or triple encoding/streaming. It supports numerous VMS solution providers.

ComNet FVT/FVR8012(M,S)1 10-bit digitally encoded video transmission transmits eight channels of video utilizing state of the art 10-bit digital encoding and decoding for very high quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode or multimode optical fiber. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data.

ComNet FVT/FVR8014(M)(S)1 10-bit digitally encoded video transmission transmits eight channels of 10-Bit Digital Video along with four channels of bi-directional data over one single mode or multimode optical fiber. The video quality exceeds RS-250C for medium-haul video transmission. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and RS485 (2 & 4 Wire) data.

ComNet FVT320D8S1 video transmitter / data transceiver utilizes 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit provides transmission of 32 independent video channels and eight bi-directional data channels over one optical fibre and are ideal for use in unconditioned roadside or out-of-plant installations. FVT320D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

ComNet FVT/FVR8018(M)(S)1 10-bit digitally encoded video transmission transmits eight channels of 10-Bit Digital Video along with eight channels of bi-directional data over one single mode or multimode optical fiber. The video quality exceeds RS-250C for short-haul video transmission. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and RS485 (2 & 4 Wire) data.

ComNet FVT/FVR120D8(M)(S)1 10 bit digitally encoded video transmission transmits 12 real-time / full frame color video signals and 8 bi-directional data signal over one optical fiber. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR120D8(M)(S)1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.