Micron Video Surveillance Storage System / HDD(5)
In edge storage applications, system integrators can optimise the design for IP network load/capacity availability by leveraging local microSD card-based storage, recording redundancy and mobile access. Micron’s is optimized for these applications with: High Endurance: Micron’s industrial card supports 3 years or more of high-quality continuous 24/7 video recording Outstanding Recording Performance: Micron’s industrial card contains firmware optimized to provide stable performance for 24x7 high quality video recording with minimal frame drops Industrial Quality: Micron’s industrial card is a high-reliability microSD card for video surveillance usage with 2 million hours mean time to failure (MTTF) Smart Tool for Health Monitoring: Micron’s industrial card offers a health monitoring feature for IP camera integration which reports card usage and lifetime remaining. Systems can integrate this feature into their software to alert end usersAdd to Compare
Browse Video Surveillance Storage System / HDD
Storage products updated recently
The transition to remote working has been a revelation for many traditional office staff, yet concerns over data security risks are rising. Mark Harper of HSM explains why businesses and their remote workers must remain vigilant when it comes to physical document security in homes. Pre-pandemic, home offices were often that neglected room in people’s homes. But now things are different. After the initial lockdown in 2020, 46.6% of UK workers did some work at home with 86% of those doing so because of the pandemic. Semi-Permanent workspaces Since then, many have found that over time, those semi-permanent workspaces have become slightly more permanent – with official hybrid working coming into effect for an assortment of businesses and their teams. The adoption of hybrid working can in fact be seen as one of the few positives to come from the pandemic, with less travel, more freedom and higher productivity top of the benefits list for businesses and their employees. The handling of sensitive documents, is a growing concern for office managers But those welcomed benefits don’t tell the whole story. The transition to remote working has undoubtedly impacted workplace security, with various touch points at risk. The handling of sensitive documents for example, is a growing concern for office managers. In simpler times, sensitive data was more or less contained in an office space, but with millions of home setups to now think about, how can businesses and their office managers control the issue of desk data? Physical document security As of January 2021, it’s said that one in three UK workers are based exclusively at home. That’s millions of individuals from a variety of sectors, all of which must continue in their efforts to remain data secure. With that, reports of cyber security fears are consistently making the news but that shouldn’t be the sole focus. There is also the underlying, but growing, issue of physical document security. The move to remote working hasn’t removed these physical forms of data – think hard drives, USBs and paper based documentation. A recent surge in demand for home printers for example, only exemplifies the use of physical documents and the potential security issues home offices are facing. Adding to that, research conducted in 2020 found that two out of three employees who printed documents at home admitted to binning those documents both in and outside of their house without shredding them. Data security concern Without the right equipment, policies and guidance, businesses are sure to be at risk Those findings present a huge data security concern, one that must be fixed immediately. The Information Commissioner’s Office (ICO) has since released guidance for those working from their bedrooms and dining tables. Designed to help overcome these challenges, the ‘security checklists’ and ‘top tips’ should be the first port of call for many. Yet throughout, the ICO make reference to ‘following your organization’s policies and guidance’ – highlighting that the onus isn’t solely on the individuals working from their makeshift offices. Office managers have a monumental task on their hands to ensure teams are well equipped within their home setups. Without the right equipment, policies and guidance, businesses are sure to be at risk. But it would be wrong to insinuate that unsecure desk data has only now become an issue for organizations. Modern office spaces Keeping clear desks has long been a battle for many office managers. In fact, clear desk policies are practiced in most modern office spaces, with it recognized as a key preventative to personal information being wrongly accessed and so falling foul of GDPR legislation. Throwing sensitive documents in the bin was never an option pre-pandemic However, the unsupervised aspect of home working has led to a potentially more lax approach to these policies, or in some cases, they can’t be followed at all. For those taking a more laid back approach, organization leaders must remind staff of their data security responsibilities and why clear desk policies have previously proven effective. Ultimately, throwing sensitive documents in the bin was never an option pre-pandemic and this must be carried through to home workspaces now. Securely destroy documents There are also concerns over the equipment people have access to at home. For example, without a reliable home shredding solution, data security suddenly becomes a tougher task. To add to that, several recommendations state that employees working from home should avoid throwing documents away by instead transporting them to the office for shredding once lockdown rules ease. While this is an option, it does pose further issues, with document security at risk of accidental loss or even theft throughout the transportation period, not to mention the time spent in storage. The best and most effective way to securely destroy documents is at the source, especially in environments where higher levels of personal data is regularly handled. Correct shredding equipment The recent findings on home office behavior represent a true security risk Only when home workers implement their own clear desk policies alongside the correct shredding equipment (at the correct security level), can both home office spaces and regular offices become data secure. Realistically, these solutions should, like the common home printer, become a staple in home office spaces moving forward. The likelihood is that many UK workers will remain in their home offices for the foreseeable future, only to emerge as hybrid workers post-pandemic. And while the current working environment is more ideal for some than others, the recent findings on home office behavior represent a true security risk to organizations. With this in mind, it’s now more key than ever for business leaders, their office managers and homeworkers to all step up and get a handle on home data security policies (as well as maintaining their standards back at the office) – starting with the implementation of clear desk policies. After all, a clear desk equals a clear mind.
The past decade has seen unprecedented growth in data creation and management. The products and services that consumers use every day – and the systems businesses, large and small, rely on – all revolve around data. The increasing frequency of high-profile data breaches and hacks should be alarming to anyone, and there’s a danger data security could worsen in the coming years. According to DataAge 2025, a report by IDC and Seagate, by 2025, almost 90% of all data created in the global datasphere will require some level of security, but less than half of it will actually be secured. Nuanced Approach To Data Security Security is a circle, not a line. Every actor involved in the handling and processing of data has responsibility for ensuring its securityThe rapid proliferation of embedded systems, IoT, real-time data and AI-powered cognitive systems – as well as new legislation like the European Union’s GDPR – means that data security has to be a priority for businesses like never before. With data used, stored and analyzed at both the hardware and software level, we need a new and more nuanced approach to data security. Security is a circle, not a line. Every actor involved in the handling and processing of data has responsibility for ensuring its security. What this means in practice is renewed focus on areas of hardware and software protection that have previously not been top of mind or received large amounts of investment from businesses, with security at the drive level being a prime example. The Importance Of Data-At-Rest Encryption In a world where data is everywhere, businesses need always-on protection. Data-at-rest encryption helps to ensure that data is secure right down to the storage medium in which it is held in a number of ways. Hardware-level encryption, firmware protection for the hard drive, and instant, secure erasing technology allow devices to be retired with minimal risk of data misuse. Data-at-rest encryption helps to ensure that data is secure right down to the storage medium in which it is held in a number of ways A recent report from Thales Data Threat found that data-at-rest security tools can be a great way to help protect your data. However, it’s important to note that this must be used in conjunction with other security measures to ensure that those that fraudulently gain access to your key management system can’t access your data. Ensuring Drives To Be Common Criteria Compliant One straightforward test any business can do to ensure its storage is as secure as possible is to check whether the drives are Common Criteria compliantDespite the clear benefits, this kind of encryption lags behind other areas, such as network and endpoint security, in terms of the investment it currently receives. The same Thales Data Threat report found that data-at-rest security was receiving some of the lowest levels of spending increases in 2016 (44%), versus a 62% increase for network and a 56% increase for endpoint security. One straightforward test any business can do to ensure its storage is as secure as possible is to check whether the drives are Common Criteria compliant. Common Criteria is an international standard for computer security certification, and drives that meet this standard have a foundational level of protection which users can build on. Providing An Additional Layer Of Security The retail industry has seen a spate of security breaches recently, with several major US brands suffering attacks over the busy Easter weekend this year. As frequent handlers of consumer card information, retailers are particularly vulnerable to attack. Data-at-rest encryption could enhance security in these instances, providing an additional layer of security between customer records and the attacker The advanced threats retailers face can often evade security defences without detection. Such a breach could grant attackers unrestricted access to sensitive information for possibly months – some breaches are known to have been detected only after consumer payment details appeared on the dark web. These types of undetected attacks are highly dangerous for retailers, which are relatively helpless to protect consumer information once their defences have been compromised. Data-at-rest encryption could significantly enhance security in these instances, providing an additional layer of security between customer records and the attacker which has the potential to make the stolen data valueless to cyber criminals. Industries In Need Of Data-At-Rest Encryption Healthcare organizations, which hold highly sensitive customer and patient information, have a strong use case for data-at-rest encryption. With the widespread adoption of electronic patient health records, that data is increasingly more vulnerable to attack. Recent research from the American Medical Association and Accenture revealed that 74% of physicians are concerned over future attacks that may compromise patient records. With the widespread adoption of electronic patient health records, that data is increasingly more vulnerable to attack The financial sector would also benefit from further investment in data-at-rest encryption, given 78% of financial services firms globally are planning on increasing their spending on critical data, according to Thales’ Data Threat Report. It’s helpful to view security as a circle in which every piece of hardware and software handling the data plays its partSMEs and enterprises are not immune to security threats either – with growing numbers of people traveling for work or working remotely, the risk of sensitive business data becoming exposed via device theft is heightened. Usernames and passwords have little use if thieves can simply remove unencrypted hard drives and copy data across. Securing Every Hardware And Software Technology vendors often focus on aspects of hardware and application security that are within their control. This is understandable, but it risks proliferating a siloed approach to data security. There is no single line for data security -- rather, it’s helpful to view it as a circle in which every piece of hardware and software handling the data plays its part. There’s a clear need for more industry dialog and collaboration to ensure data security is effectively deployed and connected throughout the security circle and across the value chain.
The use of facial recognition has become a highly debated topic recently, and has increasingly and misleadingly been criticized by some for being an unethical tool used to spy on the public. The reason for such criticism is however largely due to lack of information and regulation around the technology. Used proportionately and responsibly, facial recognition can and should be a force for good. It has the ability to do a lot more to increase security in the future – from street crime to airport security, all the way through to helping those battling addiction, the technology can take security and operations to new heights. The Rise In Knife Crime Knife crime has dominated the headlines in the UK throughout the year. Recent statistics show the number of people being admitted to emergency care due to attacks by a sharp object to be up by nearly 40 per cent from two years ago, while the number of children under the age of 18 being admitted to hospitals with stab wounds is up by 86 per cent in only four years. This recent surge in knife crime has put police forces under immense pressure, and the intelligent use of facial recognition has a role to play in enabling more informed stop & search interventions. Currently UK police can stop and search an individual they suspect to be carrying drugs or weapons or both, or they can stop and search a person in a location where there have been or are considered likely to be “incidents involving serious violence.” In both cases they must do so with access to limited information, leaving themselves open to accusations of bias or discrimination. Knife crime dominated the headlines in the UK throughout 2018 Police Systems Benefiting Crime Investigations This is where facial recognition can offer up additional intelligence. These systems can memorize the faces of persons of interest, networks of gang members, wanted criminals and those suspected of involvement in serious violent crimes. Furthermore, these systems don’t need prior personal engagement to recognize an individual and see only data, not gender, age or race. The technology doesn’t take the decision away from the human police officer. However, it does bring greater transparency and context to the decision-making process of whether a stop and search intervention is justified. Similarly, the advanced technology can recognize and match an individual seen on a CCTV camera at a crime scene to someone the police encounters on the streets some time later, justifying a stop and search on that individual. Its ability to check in real time if a person is on a criminal watchlist adds an extra layer to the decision-making process prior to conducting a stop and search, lowering the likelihood of discrimination. Facial recognition thus helps eliminate both weapons and criminals off the streets and potentially prevent crimes before they have a chance to take place. Gambling Addiction And How Facial Recognition Can Help There are an estimated 593,000 people in the UK currently battling a gambling problem, making it a serious public health issue in the country. Having understood the gravity of the issue, the UK gambling commission have set limits and advice in place to help those suffering this addiction; yet as with all addictions, gambling is a tough habit to beat. In order to put effective limitations in place and make a real difference, the gambling commission needs the right technology to protect those most vulnerable in the industry. Facial recognition technology is able to keep track of customers and thus help gambling companies in protecting their customers Facial recognition technology is able to keep track of customers and thus help gambling companies in protecting their customers to a higher degree. Monitoring those entering and moving around gambling areas is an extremely difficult task for human staff to do alone, especially in large crowded areas such as casinos. Facial recognition technology installed around the premises would be able to help the company and the staff to identify people who have registered as gambling addicts, and keep record of their day’s play in order to inform staff if and when it was time for them to stop. It would also be able to ensure effective self-exclusion procedures, by identifying a self-excluded individual via CCTV as soon as they entered the venue to then allow security staff to respectfully escort them out. Utilizing Facial Recognition At Airport Security Facial recognition has by now become a normal sight at many airports around the world. Several people today hold a so-called biometric passport, which allows them to skip the normally longer queues and instead walk through an automated ePassport control to proceed to the gate faster without having to deal with control officers. Facial recognition used in this way has managed to significantly cut waiting times at the passport control, but it also has the ability to enhance security in and around airports. Facial recognition uses algorithms to match physical characteristics against photos and videos of people's faces Earlier this year, facial recognition technology managed to catch an imposter trying to enter the US at the Washington Dulles Airport. The false passport may have been uncaught by the human eye, yet due to the accuracy of the facial recognition technology it managed to help officers catch the imposter and bring him to justice. Facial recognition thus allows officers to identify an individual faster and more accurately than the human eye. Facial recognition uses algorithms to match physical characteristics against photos and videos of people's faces, which have been collected from visas, passports and other sources. Facial recognition allows officers to identify an individual faster and more accurately than the human eye While some critics may worry about issues of privacy related to the technology, at airports the use of facial recognition has proved to both enhance security as well as speed up processes such as check-in and, in the future, even boarding proceedings. At airports the use of facial recognition has proved to both enhance security as well as speed up processes such as check-in If used correctly and proportionately, facial recognition can help safeguard the public and improve national security on several fronts. While the many benefits of facial recognition are evident, the lack of regulation and understanding of the technology has led to misconception around how it works and what it is used for. Facial recognition technology can match faces in crowded public places against criminal watch lists, and register faces that match with those on criminal watch lists – while ignoring everyone else.
Micron Technology, Inc., unveiled the world’s highest-capacity industrial microSD card — Micron® i300 1TB3 microSDXC UHS-I — to address the edge storage needs of the video surveillance market and other industrial applications. The new Micron® i300 1TB microSD card is based on Micron’s advanced 96-layer 3D quad-level cell (QLC) NAND technology, now making it cheaper for small- to medium-sized deployments to have primary storage in the camera compared to a centralized storage architecture. The i300 microSD card enables users of video surveillance systems to capture and store more than three months of high-quality video footage on-device and at the edge. Cloud-based service models “Micron’s i300 industrial-grade microSD cards for edge storage open the possibility for a broad range of video surveillance as a service deployments that no longer require local network video recorders,” said Amit Gattani, senior director of Segment Marketing in Micron’s Embedded Business Unit. “Micron’s 96-layer 3D QLC NAND is instrumental in helping us deliver 1TB of storage in a microSD form factor and at a breakthrough price point to accelerate edge storage and cloud-based service models.” Users of video surveillance systems can now store large amounts of video footage on-device VSaaS systems are increasingly integrating artificial intelligence-based and higher-resolution cameras that require more storage at the edge. The Micron i300 1TB microSDXC card allows 24/7 continuous capture and storage of up to 1TBof high-quality video in the camera. Users of video surveillance systems can now store large amounts of video footage on-device, opening a broader set of uses for cloud-managed solutions. Intelligence at the Edge “Demand for commercial surveillance cameras continues to grow at a rapid pace,” said Jeff Janukowicz, research vice president at International Data Corporation (IDC). “Smart cameras, artificial intelligence, machine learning and threat detection are being driven to the edge for real-time responsiveness, making Micron’s 1TB microSD card an invaluable solution for differentiation and innovation.” The VSaaS market is projected to reach $6 billion in 2022, corresponding to a growth of 22% compound annual growth rate between 2017 and 2022.4 The rising adoption of VSaaS by small to medium businesses and enterprises is attributed to lower overhead costs achieved through ease of installation and elimination of the need for on-site NVRs and DVRs. The ability to store large video footage files in the camera and at the edge reduces the demand for network bandwidth and expenditure associated with continuous cloud storage. Cloud-based implementation models These savings contribute to lowering the overall cost of ownership for businesses while bringing flexibility and scalability associated with cloud-based implementation models. Micron’s microSD portfolio is designed to endure harsh environments in which surveillance systems are deployed "The video surveillance market is quickly shifting toward hybrid cloud architectures that store video footage on-camera, allowing secure access via cloud-based software,” said Raj Misra, director of Hardware Engineering at Verkada. "Enterprise customers are choosing hybrid cloud offerings to reduce operational costs, simplify installation and management, and gain from powerful video analytics. Micron extending its range of reliable industrial-grade microSD cards to 1TB enables us to provide our customers with industry-leading data retention, security and video resolution options at very cost-effective price points." Micron’s industrial-grade microSD portfolio is designed to endure the harsh environments in which surveillance systems are deployed. flexibility, scalability and maintenance efficiency The Micron i300 1TB microSDXC card minimizes frame drops in a 24/7, 30 frames per second (FPS) recording environment, offering twice the reliability of hard disk drives at 2 million hours mean time to failure. The card features a smart tool for monitoring the health of devices. “VIVOTEK has launched a series of edge-computing network cameras and successfully deployed Micron’s high-quality industrial-grade microSD cards,” said Shengfu Cheng, director of Marketing and Product Development Division, VIVOTEK Inc. "Micron’s portfolio of industrial microSD cards up to 1TB equips us to deliver greater flexibility, scalability and maintenance efficiency to our customers, all of which contribute to a better return on investment.” The Micron i300 microSDXC UHS-I card is offered in 128GB to 1TB capacities, which are available for ordering. The entire industrial-grade portfolio includes capacities ranging from 32GB to 1TB.
Micron has announced general availability of the 128GB and 256GB density of edge storage microSD card solutions and collaboration with several leading video surveillance solution providers to promote surveillance-grade edge storage. Built on Micron’s industry-leading 64-layer 3D TLC NAND technology, the newly released solutions enable greater capacity in a smaller space, delivering up to 30 days of surveillance video storage in the camera itself. Over 98 percent of all microSD cards sold globally in 2017 were used in consumer applications, according to IHS Markit Industrial MicroSD Cards Over 98 percent of all microSD cards sold globally in 2017 were used in consumer applications, according to IHS Markit. These consumer-grade memory cards are not designed and validated for commercial use in video surveillance applications. Micron’s industrial microSD cards are designed specifically for professional video surveillance use cases and include a three-year warranty for 24x7 continuous video recording usage. The Micron microSD card design and firmware is optimized to ensure a reliable, robust and low-maintenance system design that delivers 24x7 continuous recording capability with minimum video frame drops. Due to a lack of surveillance-grade solutions, organisations have relied on the use of retail microSD cards that are not optimised for 24x7 recording" “Due to a lack of surveillance-grade solutions, organizations have relied on the use of retail microSD cards that are not optimized for 24x7 recording. As a result, these cards may fail earlier and also experience video frame drops as high as 30 percent,” said Amit Gattani, Sr. director of embedded segment marketing at Micron. “With a strong industry trend toward more analytics and artificial intelligence (AI) in surveillance cameras, there is a growing demand for higher reliability and higher density storage in the cameras. Micron is addressing this need with industry-leading density of 256GB in a surveillance-grade microSD card.” Edge Storage: Industrial-Quality Storage Designed for Professional Video Surveillance Applications Micron’s industrial microSD cards are specifically designed for IP video surveillance workloads and feature: Storage densities of 256GB, 128GB, 64GB, and 32GB, which enable more video to be stored at the edge, giving system designers increased flexibility Over three years of high-quality, continuous, 24x7 video recording3 in a wide range of temperatures and environments Technology for the cards to self-monitor and provide information on card usage and expected useful life remaining for each card Special firmware designed for continuous video recording, which minimizes frame drops and video loss A two million hours mean-time-to-failure (MTTF) or 0.44 percent annualized failure rate (AFR), which is equal or better than most surveillance Hard Disk Drive4 High Demand for Video Surveillance Cameras According to IHS Markit5, demand for professional video surveillance cameras continues to grow rapidly According to IHS Markit5, demand for professional video surveillance cameras continues to grow rapidly. It forecasts that over 130 million professional video surveillance cameras will be shipped in 2018, up from about 100 million in 2016. Following Micron’s release of increased capacities for their surveillance grade offerings, many leading professional video surveillance providers have adopted and deploying the solutions across their products with great success. “We are pleased that Micron is addressing the surveillance market with high reliability and high-performance edge storage products,” said Zhiming Li, product director at Dahua Technology. “Micron’s new 256GB industrial microSD card now enables use of edge storage as the primary storage in many SMB solutions and secondary storage in Enterprise solutions, enabling system integrators to optimize solution design, increase deployment flexibility and lower total cost of ownership.” Surveillance cameras are now deployed everywhere in highly distributed environments like smart cities and smart infrastructure" Edge Storage of Video and Analytics Data “Surveillance cameras are now deployed everywhere in highly distributed environments like smart cities and smart infrastructure. Edge storage of video and analytics related data in the surveillance camera gives unique flexibility to system integrators in optimizing the systems for performance and cost,” said Yul Pi, product collaboration director at Infinova. “Micron’s new ultrahigh density microSD cards bring the reliability and performance required for surveillance systems.” “The IP surveillance market continues to grow rapidly across all verticals and has created a rising demand for high-performance and reliable video storage. Recognizing this increasing need, VIVOTEK has deployed Micron’s new ultra-high-density microSD cards in our products to provide effective edge storage-based solutions for both SMB and Enterprise use case that enhance design flexibility and optimize system resources and total cost of ownership,” said Shengfu Cheng, director of marketing and product development division at VIVOTEK INC. “It’s important to adopt high-quality, surveillance-specific microSD cards, and we are pleased that Micron is leveraging its 3D flash memory leadership to deliver an optimized solution for this industry.” Small to medium businesses will drive significant growth in the coming years in the video surveillance-as-a-service market” Ultra-High-Density Edge Storage Solutions “Small to medium businesses will drive significant growth in the coming years in the video surveillance-as-a-service market,” said Jon Cropley, senior principal analyst for video surveillance at IHS Markit, a global business information provider. “Currently, these organizations typically rely on backend recording solutions for data storage. However, an increasing number of systems are available that do not require local network video recorders. The emergence of high-density edge storage has played a major role in this.” Micron understands launching ultra-high-density edge storage solutions based on 3D flash memory technology will change the way video is captured and stored" “Micron understands surveillance application cases and launching ultra-high-density edge storage solutions based on 3D flash memory technology will change the way video is captured and stored in future surveillance deployments,” said David Huang, president of GeoVision, US division. “We view our collaboration with Micron as a way to leverage edge storage to improve flexibility in solution designs and deployments while effectively bringing down the total cost of ownership for our customers.” Pricing and Availability The 128GB ($59 MSRP) and 256GB ($119 MSRP) versions of the Micron Industrial MicroSD Cards are available now for ordering through Micron global distribution channels. Micron is also showcasing the new 256GB Edge Storage solution at Security Industry Association's (SIA) New Product Showcase at ISC-West trade event in Las Vegas on April 10th, 2018.
Security and surveillance systems are becoming critical to manufacturing plants and factories by helping to address the theft of raw materials, the theft of IP, and the tampering of equipment, machinery and cargo. They can also serve as an effective monitoring tool for overseeing assembly line production and worker safety. A Micron/Repon Case Study Repon, a manufacturer of high-quality ball bearing slides used in various industries including server- and rack-mount systems, office/home furniture, white appliances, tool boxes and medical carts, recently deployed an advanced security and surveillance system—an edge storage solution—at their newly built manufacturing plant in the south of Taiwan. Their system architect, Apogear, integrated Micron’s industrial microSD cards into this solution. In the case of Repon’s deployment, 24x7 operational requirements needed to be met while minimizing the risk of data lossIn this case study, we discuss why Repon implemented an edge storage solution and how they will benefit—from a total cost of ownership (TCO) perspective—with Micron’s industrial microSD cards. Why Edge Storage? The simple answer: to enhance overall system reliability. In the case of Repon’s deployment, 24x7 operational requirements needed to be met while minimizing the risk of data loss. Edge storage—the recording of video and storing it at the camera—provides recording redundancy, helping to reduce the risk of data loss. By storing a second copy of recorded video in a microSD card, edge storage provides backup in case there are any issues with the primary network storage (including network reliability issues). In the event the primary network storage goes offline, video continues recording in the microSD card. The recorded video can then be synchronized to network video recorders (NVRs) or video management systems (VMS) after the primary system is restored. Selecting The Right Industrial microSD Card Historically, memory manufacturers sell the lowest quality NAND flash (media grade) memory to the memory card market. While this quality of NAND can be sufficient for storing pictures and video (where data is written to once and stored), using it in microSD cards for edge storage (where data can be written and rewritten to often) is not recommended. Figure 1: Edge Storage for Recording Redundancy Edge recording with memory specifically designed to support 24x7 recording over a long period of time requires a new understanding of how that memory is made— from silicon selection, to manufacturing flow, to product design, to qualification testing. Many microSD cards available in the market today are intended for consumer use in digital still cameras (DSCs), car dash cams, or home cameras; they are not designed for commercial and industrial edge storage in IP video surveillance cameras. As such, edge storage can often be viewed as ‘unreliable’ by system integrators and installers.Users may not understand that the lifetime and quality of a microSD card can vary significantly depending on the quality of the card Users may not understand that the lifetime and quality of a microSD card can vary significantly depending on the quality of the card. Selecting the wrong quality of microSD card can result in costly field failures, often occurring within months after deployment. The importance of selecting the right memory card in an edge storage solution is illustrated in Apogear’s analysis of Repon’s edge storage solution. The analysis also shows the cost savings Repon anticipates from using Micron’s Industrial microSD cards in their solution. Project Cost Analysis And Assumptions Apogear’s total cost of ownership (TCO) analysis (below) is reflected in relative percentages, and not on actual dollars and cents given regional and vendor differences. To create an understanding of the project scale, the TCO was estimated at approximately $850,000 USD over a three-year contract term in regards to deploying a 600-camera system at Repon’s manufacturing facility using Micron Industrial microSD cards. Figure 2: Cost Distribution Data, as provided by Apogear Figure 2 provides the percentage of costs during the estimated lifecycle of the edge storage system. The cost per system phase amounts to: Equipment cost (68%) - the cost of an IP camera, networking equipment (switch, cables, etc.), accessories, NVR and central monitoring system (CMS), and storage (HDD and microSD card). Deployment cost (20%) - the cost of installation, configuration and integration. Design cost (2%) - the cost of consulting and system architecture design. Maintenance cost (8%) - the cost of planned, regular and additional maintenance services. Decommission cost (2%) – the cost of dismounting and recycling equipment at the end of its lifetime Why Micron’s Industrial microSD Card? Micron’s solution is backed with a 3-year product warranty under professional surveillance use casesThe importance of product reliability is often underestimated when considering the cost of maintenance and field service. When a retail-grade microSD card fails, the card must be replaced. Not only are there direct costs of sending a crew to service and replace the card, but there are also outage times that can result in significantly more costs. By implementing Micron’s industrial microSD card, which is designed for 24/7 video surveillance edge storage usage, it is estimated that Repon will see an approximate $141,000, or about 16%, improvement in TCO compared to using an off-the-shelf retail microSD card1. High Reliability and Quality, Lower Maintenance and Replacement Costs Micron’s industrial microSD card supports 3 years of high-quality continuous 24/7 video recording with a quality specification of 2 million hours mean time to failure (MTTF) and 0.44% annualized failure rate (AFR) —2X better than a typical HDD today. Additionally, Micron’s solution is backed with a 3-year product warranty under professional surveillance use cases, helping to keep maintenance and replacement costs to a minimum. Figure 3: Maintenance and Replacement Cost Comparison, as provided by Apogear Advanced Features Minimize Risk Of Data Loss Micron’s industrial microSD card contains firmware optimized to provide stable performance for 24x7 high quality video recording with minimal frame drops.Micron understands the unique needs of this market and has developed deep application-level expertise In addition, Micron’s industrial microSD card offers a health monitoring feature for IP camera integration that reports card usage and lifetime remaining. Systems can integrate this feature into their software to alert predictive maintenance service. Micron’s industrial microSD card comes with password protected lock/unlock features to keep the device secure. Conclusion The move to edge recording and high endurance storage is happening across the Industrial IoT landscape. Targeted solid state storage solutions are emerging, and with it, new entrants into the security and surveillance ecosystem. As a leader in automotive and industrial memory solutions, Micron’s new product line of industrial microSD cards are built to meet the requirements of this industry. As a trusted advisor to its embedded customers for more than 25 years, Micron understands the unique needs of this market and has developed deep application-level expertise and a portfolio designed with that in mind. Most importantly, it brings to the market a mindset to deliver sustainable value to its customers.
Related white papers
Hybrid Hyperconverged Systems Benefit Growing Storage and Retention Needs
Five Things To Consider For AI With Video Technology
Making Your Surveillance Cyber Secure
Are Your Technology Providers Keeping You In The Dark?Download
Facing the Ever-evolving Hacker Head-onDownload
Ensuring Cybersecurity Of VideoDownload
Capture New Opportunities With Computer Vision And Video AnalyticsDownload
- Ava Security Highlights Ways To Protect Commercial Properties And Safeguard People
- Ava Security Provides Improved Security And Customer Experience With Advanced Analytics For The Retail Sector
- HPE Enhances Data Storage Solution For The Irish Prison Service Along With Scality And CTERA
- IDIS Video Surveillance Solutions Strengthens The Video Infrastructure Of Newman University