TruVision Video Surveillance Storage System / HDD(1)
Browse Video Surveillance Storage System / HDD
Storage products updated recently
The past decade has seen unprecedented growth in data creation and management. The products and services that consumers use every day – and the systems businesses, large and small, rely on – all revolve around data. The increasing frequency of high-profile data breaches and hacks should be alarming to anyone, and there’s a danger data security could worsen in the coming years. According to DataAge 2025, a report by IDC and Seagate, by 2025, almost 90% of all data created in the global datasphere will require some level of security, but less than half of it will actually be secured. Nuanced Approach To Data Security Security is a circle, not a line. Every actor involved in the handling and processing of data has responsibility for ensuring its securityThe rapid proliferation of embedded systems, IoT, real-time data and AI-powered cognitive systems – as well as new legislation like the European Union’s GDPR – means that data security has to be a priority for businesses like never before. With data used, stored and analyzed at both the hardware and software level, we need a new and more nuanced approach to data security. Security is a circle, not a line. Every actor involved in the handling and processing of data has responsibility for ensuring its security. What this means in practice is renewed focus on areas of hardware and software protection that have previously not been top of mind or received large amounts of investment from businesses, with security at the drive level being a prime example. The Importance Of Data-At-Rest Encryption In a world where data is everywhere, businesses need always-on protection. Data-at-rest encryption helps to ensure that data is secure right down to the storage medium in which it is held in a number of ways. Hardware-level encryption, firmware protection for the hard drive, and instant, secure erasing technology allow devices to be retired with minimal risk of data misuse. Data-at-rest encryption helps to ensure that data is secure right down to the storage medium in which it is held in a number of ways A recent report from Thales Data Threat found that data-at-rest security tools can be a great way to help protect your data. However, it’s important to note that this must be used in conjunction with other security measures to ensure that those that fraudulently gain access to your key management system can’t access your data. Ensuring Drives To Be Common Criteria Compliant One straightforward test any business can do to ensure its storage is as secure as possible is to check whether the drives are Common Criteria compliantDespite the clear benefits, this kind of encryption lags behind other areas, such as network and endpoint security, in terms of the investment it currently receives. The same Thales Data Threat report found that data-at-rest security was receiving some of the lowest levels of spending increases in 2016 (44%), versus a 62% increase for network and a 56% increase for endpoint security. One straightforward test any business can do to ensure its storage is as secure as possible is to check whether the drives are Common Criteria compliant. Common Criteria is an international standard for computer security certification, and drives that meet this standard have a foundational level of protection which users can build on. Providing An Additional Layer Of Security The retail industry has seen a spate of security breaches recently, with several major US brands suffering attacks over the busy Easter weekend this year. As frequent handlers of consumer card information, retailers are particularly vulnerable to attack. Data-at-rest encryption could enhance security in these instances, providing an additional layer of security between customer records and the attacker The advanced threats retailers face can often evade security defences without detection. Such a breach could grant attackers unrestricted access to sensitive information for possibly months – some breaches are known to have been detected only after consumer payment details appeared on the dark web. These types of undetected attacks are highly dangerous for retailers, which are relatively helpless to protect consumer information once their defences have been compromised. Data-at-rest encryption could significantly enhance security in these instances, providing an additional layer of security between customer records and the attacker which has the potential to make the stolen data valueless to cyber criminals. Industries In Need Of Data-At-Rest Encryption Healthcare organizations, which hold highly sensitive customer and patient information, have a strong use case for data-at-rest encryption. With the widespread adoption of electronic patient health records, that data is increasingly more vulnerable to attack. Recent research from the American Medical Association and Accenture revealed that 74% of physicians are concerned over future attacks that may compromise patient records. With the widespread adoption of electronic patient health records, that data is increasingly more vulnerable to attack The financial sector would also benefit from further investment in data-at-rest encryption, given 78% of financial services firms globally are planning on increasing their spending on critical data, according to Thales’ Data Threat Report. It’s helpful to view security as a circle in which every piece of hardware and software handling the data plays its partSMEs and enterprises are not immune to security threats either – with growing numbers of people traveling for work or working remotely, the risk of sensitive business data becoming exposed via device theft is heightened. Usernames and passwords have little use if thieves can simply remove unencrypted hard drives and copy data across. Securing Every Hardware And Software Technology vendors often focus on aspects of hardware and application security that are within their control. This is understandable, but it risks proliferating a siloed approach to data security. There is no single line for data security -- rather, it’s helpful to view it as a circle in which every piece of hardware and software handling the data plays its part. There’s a clear need for more industry dialog and collaboration to ensure data security is effectively deployed and connected throughout the security circle and across the value chain.
The use of facial recognition has become a highly debated topic recently, and has increasingly and misleadingly been criticized by some for being an unethical tool used to spy on the public. The reason for such criticism is however largely due to lack of information and regulation around the technology. Used proportionately and responsibly, facial recognition can and should be a force for good. It has the ability to do a lot more to increase security in the future – from street crime to airport security, all the way through to helping those battling addiction, the technology can take security and operations to new heights. These systems can memorize the faces of persons of interest, networks of gang members, wanted criminals and those suspected of involvement in serious violent crimes The Rise In Knife Crime Knife crime has dominated the headlines in the UK throughout the year. Recent statistics show the number of people being admitted to emergency care due to attacks by a sharp object to be up by nearly 40 per cent from two years ago, while the number of children under the age of 18 being admitted to hospitals with stab wounds is up by 86 per cent in only four years. This recent surge in knife crime has put police forces under immense pressure, and the intelligent use of facial recognition has a role to play in enabling more informed stop & search interventions. Currently UK police can stop and search an individual they suspect to be carrying drugs or weapons or both, or they can stop and search a person in a location where there have been or are considered likely to be “incidents involving serious violence.” In both cases they must do so with access to limited information, leaving themselves open to accusations of bias or discrimination. Knife crime dominated the headlines in the UK throughout 2018 Police Systems Benefiting Crime Investigations This is where facial recognition can offer up additional intelligence. These systems can memorize the faces of persons of interest, networks of gang members, wanted criminals and those suspected of involvement in serious violent crimes. Furthermore, these systems don’t need prior personal engagement to recognize an individual and see only data, not gender, age or race. Facial recognition thus helps eliminate both weapons and criminals off the streets and potentially prevent crimes before they have a chance to take place. The technology doesn’t take the decision away from the human police officer. However, it does bring greater transparency and context to the decision-making process of whether a stop and search intervention is justified. Similarly, the advanced technology can recognize and match an individual seen on a CCTV camera at a crime scene to someone the police encounters on the streets some time later, justifying a stop and search on that individual. Its ability to check in real time if a person is on a criminal watchlist adds an extra layer to the decision-making process prior to conducting a stop and search, lowering the likelihood of discrimination. Facial recognition thus helps eliminate both weapons and criminals off the streets and potentially prevent crimes before they have a chance to take place. Gambling Addiction And How Facial Recognition Can Help There are an estimated 593,000 people in the UK currently battling a gambling problem, making it a serious public health issue in the country. Having understood the gravity of the issue, the UK gambling commission have set limits and advice in place to help those suffering this addiction; yet as with all addictions, gambling is a tough habit to beat. In order to put effective limitations in place and make a real difference, the gambling commission needs the right technology to protect those most vulnerable in the industry. Facial recognition technology is able to keep track of customers and thus help gambling companies in protecting their customers Facial recognition technology is able to keep track of customers and thus help gambling companies in protecting their customers to a higher degree. Monitoring those entering and moving around gambling areas is an extremely difficult task for human staff to do alone, especially in large crowded areas such as casinos. Facial recognition technology installed around the premises would be able to help the company and the staff to identify people who have registered as gambling addicts, and keep record of their day’s play in order to inform staff if and when it was time for them to stop. It would also be able to ensure effective self-exclusion procedures, by identifying a self-excluded individual via CCTV as soon as they entered the venue to then allow security staff to respectfully escort them out. Utilizing Facial Recognition At Airport Security Facial recognition has by now become a normal sight at many airports around the world. Several people today hold a so-called biometric passport, which allows them to skip the normally longer queues and instead walk through an automated ePassport control to proceed to the gate faster without having to deal with control officers. Facial recognition used in this way has managed to significantly cut waiting times at the passport control, but it also has the ability to enhance security in and around airports. Facial recognition uses algorithms to match physical characteristics against photos and videos of people's faces Earlier this year, facial recognition technology managed to catch an imposter trying to enter the US at the Washington Dulles Airport. The false passport may have been uncaught by the human eye, yet due to the accuracy of the facial recognition technology it managed to help officers catch the imposter and bring him to justice. Facial recognition thus allows officers to identify an individual faster and more accurately than the human eye. Facial recognition uses algorithms to match physical characteristics against photos and videos of people's faces, which have been collected from visas, passports and other sources. Facial recognition allows officers to identify an individual faster and more accurately than the human eye At airports the use of facial recognition has proved to both enhance security as well as speed up processes such as check-inWhile some critics may worry about issues of privacy related to the technology, at airports the use of facial recognition has proved to both enhance security as well as speed up processes such as check-in and, in the future, even boarding proceedings. If used correctly and proportionately, facial recognition can help safeguard the public and improve national security on several fronts. While the many benefits of facial recognition are evident, the lack of regulation and understanding of the technology has led to misconception around how it works and what it is used for. Facial recognition technology can match faces in crowded public places against criminal watch lists, and register faces that match with those on criminal watch lists – while ignoring everyone else.
Terry Gold of D6 Research has been giving “cyber in physical security” presentations at a variety of conferences, including ISC West and the Cyber:Secured Forum. We caught up with him for some insights about the intersection of cybersecurity and physical security. Q: Tell us a little bit about your background, specifically in the context of its relevance to cyber security in physical access. Gold: I started out in information security and then got involved in physical security along the way. I started really focusing on physical from a cyber standpoint about 10 years ago. I got into ethical hacking about 8 years ago, and then worked on putting it all together. There wasn’t a roadmap, so I had to build a methodology which I now share with other hackers, end users and law enforcement. I spend all my time either in the lab building success models, methods, and testing them out in some of the largest customers or agencies in the world for validation and improvement. Also, a chunk of my time is spent re-engineering security assessment and controls for end users or validating vendors on their behalf from a unique viewpoint that’s not (yet) typical in the industry. Q: How well prepared is physical security overall against cyber threats? Gold: Not well at all. While security is imperfect anywhere, much of the practices and designs have critical defects and overlook either best practice or fundamental application security principles. I’d say that the industry is very wide open for exploitation that doesn’t take much sophistication to execute. Breach disclosure laws are focused on mandatory reporting for personally identifiable information (PII) Q: What things stand out to you along your journey regarding the changes that you are seeing on this topic? Gold: Culture. Over the years, the industry (and most end users) have been dismissive of my findings. Industry culture hasn’t been aligned to embrace the topic and make requisite improvements that are needed to achieve “good security.” However, I’m finally starting to see that change – quickly and at scale. It doesn’t mean that we’re close to “good,” but rather reached the inflection point of change – and I’m rather pleased about it. Breach disclosure laws has resulted in IT getting a lot of media attention in comparison to hacks made against physical security Q: D6 does a lot of research in this area. What is the analysis behind the recent push for cyber security in physical security? Gold: First, it must be recognized that the threat isn’t new, but rather that the industry is only now coming to the table on it. Industry sentiment has been that breaches in physical security don’t happen or that there’s little impact. It must be recognised that the threat isn’t new, but rather that the industry is only now coming to the table on itBoth are false. Mainly, IT gets all the media attention with breaches for two reasons; 1) breach disclosure laws are focused on mandatory reporting for personally identifiable information (PII), and 2) there is really poor detection (mostly non-existent) against hacks in physical security, so they go unrecognized. On the other side, as physical security systems increasingly resemble an IT architecture, so does their risk profile. As it expands to mobile, cloud, IOT and intelligence - InfoSec and auditors are taking a look and are alarmed at what they’re seeing. Before you know it, the scrutiny is cutting pretty deep, pressure for alignment becomes intense, and vendors feel the pinch on the sales cycles. It’s not a comfortable position for anyone. Q: What will be the projected impact? Are practitioners seeing the whole picture? Gold: No, and this area is probably the most important takeaway of this interview. The industry is where InfoSec was about 15 years ago in their journey, except we have an additional headwind to deal with – culture change. This industry tends to rely more on trusted relationships than validating the recommendations are being provided. There are too many prevailing misconceptions, that unless remediated, investments won’t be as effective as expected. Q: What do you believe are the top misconceptions? Gold: Well, this is a longer topic, but here’s a sampling that cuts across different areas. Regarding hackers: A misconception is that they’re generally not interested. Hackers are increasingly very interested. When I teach a workshop at a hacker conference, it’s usually the quickest to fill up and go to wait list (within a couple hours). Regarding attacks: A misconception is that attacks are executed directly against the target system. Example, their goal is to get into VMS and attack it directly. The reality is that they’re more commonly dynamic where physical is part of a larger attack and its role is an easier gateway to another system (or vice versa, with many hops). Regarding protective measures. The most prevalent mistake that the industry is currently making is too much focus and reliance on air-gapping networks or locking ports. This is only a slice of the attack surface and there are various ways to get around it. There’s a heavy price to pay for those that that rely too much on this strategy since its often accompanied by few mechanisms to deal with actors once they do get in (and they definitely will). Regarding the value of exploiting physical security. Too often perceived as low value. In our white paper we review many of the things that hackers can do, what they gain, and how it can impact the overall organization. It’s far broader and deeper than most. Q: What are the top things that need to change in the industry? Gold: First, culture. This can be answered by adopting the same principles as InfoSec. From an execution standpoint, the industry needs to change how they perform risk assessments. At D6, we’ve developed a stepwise methodology from ground up and it’s a huge differenceIndustry practices, including certifications, are significantly outdated and don’t reflect a methodology that accurately considers cybersecurity, actors, methods, and proactive remedy. At D6, we’ve developed a stepwise methodology from ground up and it’s a huge difference. End users that don’t re-engineer their practice, will be very limited for meaningful cybersecurity improvement. One of the changes needed in the industry includes how risk assessments are performed Q: Generally, what advice do you give to clients on steps to move their cyber security to the next level? Gold: Don’t operate like a silo anymore. Transition from industry “common practices” to best practices that can be validated. Rely less on previous relationships and more toward domain competence. Collaborate with the CISO to a principled, goal-oriented and metrics-based approach. Embed an InfoSec person on the physical team. Present priorities and risks jointly to the board within an overall risk portfolio. Invite scrutiny from auditors. Get a red team performed once a year. Until you do the last step, you don’t really know where you stand (but don’t do it until the other things are done). Last, set the bar higher with vendors to support these improvements or their products will just end up being weak link. Q: What type of challenges do you see and any advice on how end user and integrators can overcome them? Lessons learned? Gold: There are too many specific domains across cybersecurity – it’s not just a network security resourceFeedback I get from integrators is that they’re struggling to figure out how to deliver expertise to their clients in their area. They’re somewhat overwhelmed with the complexity, becoming an expert or how expensive it is to hire and maintain those skilled resources. My best advice is not to do either. There are too many specific domains across cybersecurity – it’s not just a network security resource. Not even the large integrators have the right bench, and unfortunately, they’re just further down a doomed path than smaller integrators. Form a partnership with boutique cybersecurity firms that have multiple specialists. Negotiate rates, margins, scope, and call on them when needed. It won’t come out of your bottom line, the results will be better, and the risk will be extremely low. You’ll learn along the way too. Q: Anything notable that your research is uncovering in this area that might not be on people’s radar yet? Gold: Yes, quite a bit. Our Annual Industry Assessment Report goes through every segment. We’re making pretty bold statements about the future and impact, but we’re confident. One thing that stands out is how intelligence (and the swath of subsets) will impose stringent demands on physical security due to attribute and data collection (for analysis) which will absolutely require privacy compliance, integrity, and controls. It will even shape organizations that might not care about cybersecurity but are prioritizing function. Q: Where can readers learn more about your perspectives on this topic? Gold: Blogs on the D6research.com website. Our annual report. Val Thomas of Securicon and D6 have collaborated on a three-part cybersecurity in physical white paper series. It goes into all of this in detail, as well as remedy.
Feenics Inc., an award-winning provider of the Access Control as a Service (ACaaS) Keep by Feenics cloud-hosted platform, has added two new team members to its Ottawa headquarters. Yannis Souris has been appointed Marketing Manager and Chris Smith takes on the role of Regional Sales Manager for the Northeast, as the company continues to address its ongoing fast growth in the cloud-hosted access control market. Souris is a seasoned marketing professional with 20 years of experience in digital marketing programs, brand management and e-Commerce platforms. His marketing, advertising and creative work has garnered Souris considerable recognition—earning more than 200 local, national and international awards. Cloud-hosted platform Chris Smith is a results-oriented professional with nearly a decade of experience managing a national territory At Feenics, Souris will work closely with top management to continue to communicate the Feenics story of the efficiencies of a cloud-hosted platform—focusing on social media, media outreach and internal and external marketing programs. Prior to joining Feenics, Souris was Digital Marketing Director for Knowland Courses and Workshops in Ottawa. New Regional Sales Manager for the Northeast, Chris Smith is a results-oriented professional with nearly a decade of experience managing a national territory, focusing on the implementation of effective strategies to increase sales and grow the customer base. Most recently he was Regional Sales Manager for Interlogix, where he managed and developed the dealer channel, attaining leading sales results. His other achievements include: 2018 Top Rising Talent Award; Employee of the Quarter Q1 2018; and Top 10% in sales quota achievement. Assist in critical initiatives “As we continue to grow, adding important team members will assist in our critical initiatives and messaging,” said Paul DiPeso, Executive Vice President of Feenics. “With these two hires, we bring new and exciting marketing expertise and deep sales experience to the Feenics organization.” Keep by Feenics gives users the choice of on-site servers or offsite cloud deployment Feenics continues to fortify its position as an ACaaS market leader, recently certified as an International Organization for Standardization ISO 9001:2015 company. To address global growth, Feenics opened an office in the Middle East and since has added other management and sales team members to solidify its market expansion. Feenics is the maker of Keep, a cloud-hosted platform that provides extreme scalability, unprecedented flexibility and advanced security in ACaaS applications. Native visitor management It integrates native visitor management and a RESTful API that allows systems installers simple integration of a wide array of complementary systems and open hardware devices, generating new revenue streams while creating a path for customers to lower their total cost of system ownership. Keep by Feenics gives users the choice of on-site servers or offsite cloud deployment, hosted by the public cloud Amazon Web Services. Keep significantly minimizes costs through simple, maintenance-free and automatic upgrades, patches, disaster recovery and back up.
Interlogix, a division of UTC Climate, Controls & Security, announces a plan to dismantle its businesses in the United States and Canada by the end of the year. Here is a statement from the company: “After a thorough portfolio review of our security business, we have communicated our plans to wind down our Interlogix U.S. and Canada businesses. This decision will allow us to focus on the significant growth opportunities for our other fire and security businesses, including LenelS2.” Fire detection and life safety Dealers can continue to purchase, install, register, and service Interlogix products with complete confidence" Interlogix products will be manufactured and orders fulfilled through 2019 and will be available for purchase from distributors and dealers during ‘a well-coordinated transition period,’ according to the company. “We will continue to provide customer support related to product technical services, timely fulfillment and comprehensive product warranty into 2020 and beyond,” says the company statement “Dealers can continue to purchase, install, register, and service Interlogix products with complete confidence.” Interlogix represents a full product line including intrusion detection, video surveillance, fire detection and life safety, access control and security/fire data transmission products. Enhanced video streaming capabilities Interlogix was created in the merger in 2000 of ITI Technologies and SLC Technologies. It was purchased by General Electric in 2002 and later renamed GE Security. United Technologies Corp. (UTC) bought the security business of General Electric in 2010 and reverted back to using the Interlogix brand. Last year, Interlogix introduced TruVision Navigator version 8.0 of its unified security software Last year, Interlogix introduced TruVision Navigator version 8.0 of its popular unified security software, including enhanced video streaming capabilities, integration with the Interlogix UltraSync Modular Hub systems and tighter integration with IFS networking switches. Voice-Controlled digital devices Early this year, Interlogix reinvested in its UL-listed, professional-grade, security panel lineup and added two touchscreen controls. In addition, it began providing access to more device integrations – such as sensors, lights, locks, thermostats and garage door controls, video doorbell cameras and voice-controlled digital devices, among others. In the spring, the company re-launched its Interlogix Security Pro program, a national channel partner program offering Interlogix dealers an array of resources and incentives designed to help them successfully grow their businesses.
The winning products and services of the 2019 Innovation Awards were revealed at ESX 2019 on June 4 in Indianapolis. Each year, the ESX Innovation Awards program recognizes outstanding products and services that drive the electronic security and life safety industry forward. This year’s winners continue that legacy with novel innovations and improvements. To determine the best of the best, judges selected winners from a pool of applications from manufacturers and service providers serving the industry with innovative end-user offerings and tools that help dealers, integrators and monitoring professionals become more efficient and profitable. category Winners were as follows: Access control pdqSMART+, Grade 1 Cylindrical Lock by PDQ Industries Enterprise Access Control by Alarm.com OmniAssure Touch by Honeywell Commercial automation / control systems / networking TruProtect™ Integrated Security Solution by Interlogix Dealer services QuoteAnywhere G2.0 – Mobile Sales Quote & Sign Platform by WeSuite CSR Readiness PRO by CSR Privacy Solutions, Inc. Digital health / well-being systems Essence 3D Sense Fall Detector by Essence Smart Care Fire / life safety DynamixSmoke by Advanced Honeywell Home SiXCOMBO Two-Way Wireless Smoke/Heat and Carbon Monoxide Detector by Resideo Installation / service tools fireNspec by PnewSoft, LLC. System Surveyor by System Surveyor Intrusion systems BX Shield Outdoor Boundary PIR Series by Optex, Inc. IQ Panel 2 Plus by Qolsys 1122 Wireless (PIR) Motion Detector by DMP - Digital Monitoring Products BAT-Connect Communicator by Alula Mobile apps for consumers Honeywell Total Connect VISTA Partitions by Resideo Video Verification App by DICE Corporation Smart Signal by Alarm.com Monitoring station CHeKT Visual Verification Bridge by CHeKT Specialty products & services WattBox 150 IP Power Outlets with OvrC (1 controlled bank, 2 outlets) by SnapAV Video surveillance SecureCom Video NVR™ by DMP - Digital Monitoring Products Thermal-Optical DeepinView Turret Camera DS-2TD1217-3/V1 by Hikvision USA Umbo AICamera by Umbo Computer Vision DuraVisionDX0211 by EIZO Inc. Umbo Light by Umbo Computer Vision Next-gen products Judges from across the country were invited to provide their expert opinions The winners selected are recognized as next-gen products and services that offer significant opportunities for growth. Judges from across the country were invited to provide their expert opinions based on thorough criteria. This year’s judges were: Rodger Reiswig, Johnson Controls (Florida); Grady Medcalf, Spectrum (Colorado); Michele Monheim, Amherst Alarm (Upstate New York); Steven E. Paley, Rapid Security Solutions (Florida) and Adam Thompson, Wired-Up Systems (Arizona). Criteria of judging Entrants to the Innovation Awards program were judged on: features and functions, innovation, end-user experience, ability to solve a problem, revenue growth potential, impact on company efficiencies and compliance with regulations. These metrics provided a rubric that determined the most innovative and exceptional products and services in the industry. Winners of the Innovation Awards were featured in the ESX Innovation Awards Showcase in Booth 615 during live expo hours.
3 Reasons To Migrate To A New Access Control SystemDownload
Schooling the Market on Education SecurityDownload
Lawrence, Massachusetts Deploys FLIR Video System For SafetyDownload
- Dahua AI Helps Haier Create Intelligent Industrial Park In Russia
- IDIS Video Technology Prepares Netherlands’ Circuit Zandvoort For 2020 Formula 1 Grand Prix
- MOBOTIX Secures Bolloré Logistics, New Zealand With Hemispheric And Dual D15 Cameras
- BCDVideo Enhances Bank Security With Its IP Video Surveillance Systems