Sustainability is one of the current megatrends. Unsurprisingly, as climate change affects everyone. And, just as everybody is part of the problem to various degrees, everyone can also be part of the solution. Industry-sponsored initiatives Indeed, increasing customer awareness is driving change, as is pressure from non-governmental organizations (NGOs) and industry-sponsored initiatives that advocate stricter guidelines for manufacturers. The UN Sustainability Development Goals (SDGs) also plays an immeasurable part. Many organizations support SDGs by taking responsibility and acting more proactively, in order to make their business more sustainable. Selecting sustainable materials is important Selecting sustainable materials is one of the focus areas of green design" “Selecting sustainable materials is one of the focus areas of green design,” said Ausra Reinap, Senior Environmental Engineer at Axis Communications, adding “We’re striving to use more recycled materials and aim to minimize and eventually, avoid the use of hazardous substances in our products. With the development of cameras that are free of hazardous brominated and chlorinates flame retardants, without compromising fire safety, we have taken the first step towards this goal.” Ausra Reinap is a member of the Axis Green Design Group, which was formed back in 2012, with the aim to support the company’s move to more eco-friendly products. Bringing together different competencies from design, environment and quality, the group aims to increase environmental awareness and to motivate Axis’ mechanical designers during the development process. Axis has identified four eco-innovation aspects: Material selection Optimize part design Optimize design for manufacturing Optimize disposal Covering the entire product lifecycle “Green Design is a rather wide concept that focuses on how we can minimize our environmental impact,” said Ausra, adding “not only throughout the value chain, but throughout the entire product lifecycle.” In 2015, Axis launched its Green Design Evaluation Scorecard to help designers integrate environmental considerations into the product development process. Ausra Reinap said, “We know that selecting recycled materials can be a challenge, especially ones that comply with the strict UL standards, which are crucial in the USA and Canada.” Axis list of banned and restricted substances Axis has a list of banned and restricted substances, including substances that are already regulated by law Axis has a list of banned and restricted substances, including both substances that are already regulated by law and substances that aren’t restricted or banned yet, but will likely be so in the future. “The list includes plasticizers, as well as brominated and chlorinated flame retardants or BFRs and CFRs as we call it, and it’s very important to us to not just wait for legislation, but rather be one step ahead,” Ausra explains. Weight is essential to optimize part design. Less material means using less resource, but also reduced environmental impact from transports. Another way to optimize the part design is to reduce the number of screws or even design without screws altogether, for instance, by using snap joints instead. Optimizing design for manufacturing Equally important is how the product is produced. Optimizing design for manufacturing means specifying the appropriate surface finishing and tolerances, which will minimize waste. Ausra points out that this can be a balancing act. Ausra Reinap said, “We want to optimize our processes, but without jeopardizing the quality. This claim to ourselves made it somehow challenging because the BFR/CFR-free materials tend to be more rigid, but we found a way to solve it while being sustainable.” Looking beyond the product usage phase, it is essential to design for optimal disposal. Making disassembly easier will simplify repair, reuse and recycling. “Optimally,” said Ausra, adding “We’d have a modular design that would enable a circular approach. We’re running and evaluating some initiatives, so this is something that we’re looking into.” BFR/CFR-free product development Senior engineer at Axis Communications, Christian Adielsson has hands-on experience of green design in a new product development project. He said, “We were starting a camera project based on a totally new platform and one requirement was that everything should be free from brominated and chlorinated flame retardants.” The first product we launched, that had still three components in it, that weren’t BFR/CFR-free, was AXIS P1375" “We started contacting suppliers in search of substitutes,” said Christian Adielsson, adding “Our first approach to tackle this problem ended up being quite time-consuming, as we didn’t have the proper tools to automate the process.” He adds, “Thus, we had to go through everything manually. The first product we launched, that had still three components in it, that weren’t BFR/CFR-free, was AXIS P1375. But we knew this was only the first step.” AXIS P1375 Network Camera About two years after starting the development of AXIS P1375 Network Camera, the team found a way to make the camera environmental friendly, by eliminating brominated and chlorinated flame retardants in all the components. But thanks to the usage of metal oxides, the devices are still flame resistant. Christian Adielsson said, “It’s great to see that our BFR and CFR-free camera is a pioneer product for the network camera industry. It ensures safety and security while contributing to a greener environment.” Taking responsibility for sustainability Ausra Reinap concludes by stating, “As a manufacturer today, it’s crucial that you take responsibility for sustainability, and green design is necessary to be a credible supplier. Axis has very high ambitions and if our ambition is to be the industry leader, we must reduce our environmental impact throughout the entire product life cycle.”
Axis Communications has made another step towards a green camera portfolio by introducing the company’s first cameras that are free of hazardous brominated and chlorinated flame retardants, (BFR/CFR free). AXIS P13 and M30 Cameras The new cameras within AXIS P13 and AXIS M30 Network Camera Series are the result of Axis’ focus on sustainability and alignment with the UN Sustainability Development Goals. By developing cameras that don’t contain harmful halogens, Axis has made an important step in setting an industry standard when it comes to sustainability and green design. These latest devices are free of brominated and chlorinated flame retardants but are still flame resistant" “Our new sustainable network cameras are the result of over five years of development and patience. While we care deeply about sustainability, we also need to maintain high standards of quality in our cameras. As an example, these latest devices are free of brominated and chlorinated flame retardants but are still flame resistant,” states Andres Vigren, Global Product Manager at Axis Communications. As part of its green design initiative, Axis has identified four areas of eco-innovation: Material selection Optimized part design Optimized design for manufacturing Optimized disposal Replacing hazardous halogens with sustainable alternatives By exchanging the hazardous halogens in the devices with more sustainable alternatives, the new cameras are not only better for environment and health, but are also part of the circular economy because they are more recyclable. We’re proud to be a role model when it comes to green design" “It is really important for us to not just wait for regulations that prohibit the use of hazardous materials or taxation that will make products prohibitively expensive, but to remain one step ahead. We’re proud to be a role model when it comes to green design, and responding not only to customer requests, but the responsibility of all businesses to act in an environmentally responsible way,” said Ausra Reinap, Senior Environmental Engineer at Axis Communications. Developing halogen-free products “It would be great if we could inspire other manufacturers to invest in the development of halogen-free products,” said Andres Vigren, adding “The next step is to make it a future industry standard and help increase customer requests for more sustainable products.” The BFR/CFR-free cameras from Axis are: AXIS P1377 and AXIS P1378 Network Cameras Robust, fast-performing fixed box cameras designed to deliver high-resolution video of objects and people in wide, open areas. AXIS M3064-V, AXIS M3065-V, AXIS M3066-V and AXIS M3075-V Network Cameras Ultra-compact mini domes for discreet surveillance of stores, hotels, schools, banks and offices. Brominated and chlorinated flame retardants Brominated and chlorinated flame retardants, or BFR and CFR for short, protect a product from being flammable over the period of its lifetime. As part of the family of halogenated flame retardants, they tend to not break down. This becomes a problem once they enter the environment, as they take a long time to decompose – if ever. Besides being bio-accumulative, BFR and CFR are also harmful, as they are toxic for both humans and the environment.
Artificial Intelligence: Understanding Its Place In Physical SecurityDownload
Delivering Smart, Secure and Healthy Retail Environments with the CloudDownload
Protecting Your Data Against Physical ThreatsDownload
Achieving True Situational Awareness In Operation Centers With Computer Vision & AIDownload