Since renovation began in the 1990s, the Custard Factory in central Birmingham has grown into an important center for the creative and digital industries, as well as a destination for leisure, retail and cultural activities. The 15-acre site, which in Victorian days was a pioneering center for food and ingredients production, has been transformed into a thriving working community for hundreds of small businesses, benefiting from several phases of development. The Custard Factory now comprises multiple buildings in a vibrant city center location, so the risks of petty crime must be planned for and the safety of users ensured.

Upgrading to IP and wireless technology

An ageing analog video system at the Custard Factory was proving expensive to maintain and, without enough cameras, it was giving only limited coverage. An upgrade was needed but installation work had to take place without disruption to the many businesses at the site, so specialist integrator Unison Integrated Technology was asked to find the most suitable solution.

Latest video tech from IDIS was selected because it provided the best image quality

The latest video tech from IDIS was selected because it provided the best image quality, unrivalled usability and trouble-free installation with the ability to mix and match equipment. It also allowed existing infrastructure such as coax cabling to be incorporated, and by combining HD-TVI with the latest IP and wireless technology it enabled real-time monitoring in the control room without the need for complex and expensive civil works.

IDIS IP cameras

More than 60 new high-performance cameras have now been integrated into a leading-edge solution giving complete coverage of this diverse estate made up of the main Custard Factory Buildings, an open-air carpark, neighbouring external areas and the Fazeley studios.

To protect the carpark and external areas, including historic archways, a mix of cameras has been used, including dome cameras with IR LED and wide dynamic range giving coverage in all lighting conditions. All IDIS IP cameras also benefit from IDIS Smart Failover technology which ensures continued video capture in the event of network instability or failure.

DR-6316 H.265 NVR

Video is streamed to the control room via a SilverNet wireless link, yet crucially there is no latency or lag on the images. These cameras are connected to a DR-6316 H.265 NVR, supporting 16 channels that utilizes IDIS Intelligent Codec to minimize bandwidth and storage requirements.

Thanks to IDIS true plug-and-play technology, Unison Integrated Technology installed new cameras without disruption

At the Fazeley studios, which includes both indoor and outdoor facilities, a combination of IP and analog bullet cameras, PTZs and domes are used.  And at the Custard Factory main buildings, four PTZ cameras, two fixed domes and 25 bullet cameras are connected to IDIS’s powerful DR-8364D recorder, which supports up to 64 channels with a super-fast 900Mps throughput.

IDIS true plug-and-play technology

Thanks to IDIS true plug-and-play technology, Unison Integrated Technology installed the new cameras without disruption or any need to stop trading during the work, which included working around operational restaurants and shops.

At the purpose-built security control, room operators now have a complete view of the site, allowing them to replace inefficient patrols on foot with more frequent video tours. And the free IDIS Center video management system (VMS) makes it easy to operate the new, enhanced system incorporating third-party cameras, the HD-TVI analog devices and the latest IDIS IP tech.

High-resolution video surveillance

With the new surveillance system and improved lighting in place visitors feel safer, particularly walking to and from the car park after evening events. The ability of the security team to monitor events real-time and respond to health & safety incidents is appreciated by event organisers using the Fazely venue. And police have been able to tackle petty theft more effectively thanks to the high-resolution video evidence which is now easily and quickly retrieved in order to tackle crime.

The IDIS technology fully delivered on our requirements for an affordable, high-quality surveillance solution"

The solution is flexible and scalable, with more cameras easily added as the Digbeth estate continues to evolve and expand. Custard Factory estate manager Simon Dunn says the upgrade has far exceeded expectations.

IDIS video security system

Simon says, “The IDIS technology fully delivered on our requirements for an affordable, high-quality surveillance solution covering our complete estate. The Unison engineering team delivered the project to the highest standard and they were considerate and respectful of our busy, live environment. I am very pleased with the result, both in terms of the quality of the images and the operation of the system, which is simple and effective.”

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

COVID-19 Worries Boost Prospects Of Touchless Biometric Systems
COVID-19 Worries Boost Prospects Of Touchless Biometric Systems

Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads. No longer in favor are contact-based modalities including use of personal identification numbers (PINs) and keypads, and the shift has been sudden and long-term. Both customers and manufacturers were taken by surprise by this aspect of the virus’s impact and are therefore scrambling for solutions. Immediate impact of the change includes suspension of time and attendance systems that are touch-based. Some two-factor authentication systems are being downgraded to RFID-only, abandoning the keypad and/or biometric components that contributed to higher security, but are now unacceptable because they involve touching. Touchless biometric systems in demand The trend has translated into a sharp decline in purchase of touch modality and a sharp increase in the demand for touchless systems, says Alex Zarrabi, President of Touchless Biometrics Systems (TBS). Biometrics solutions are being affected unequally, depending on whether they involve touch sensing, he says. Spread of the novel coronavirus has jolted awareness of hygiene as it relates to touching surfaces such as keypads “Users do not want to touch anything anymore,” says Zarrabi. “From our company’s experience, we see it as a huge catalyst for touchless suppliers. We have projects being accelerated for touchless demand and have closed a number of large contracts very fast. I’m sure it’s true for anyone who is supplying touchless solutions.” Biometric systems are also seeing the addition of thermal sensors to measure body temperature in addition to the other sensors driving the system. Fingerscans and hybrid face systems TBS offers 2D and 3D systems, including both fingerscans and hybrid face/iris systems to provide touchless identification at access control points. Contactless and hygienic, the 2D Eye system is a hybrid system that combines the convenience of facial technology with the higher security of iris recognition. The system recognises the face and then detects the iris from the face image and zeros in to scan the iris. The user experiences the system as any other face recognition system. The facial aspect quickens the process, and the iris scan heightens accuracy. TBS also offers the 2D Eye Thermo system that combines face, iris and temperature measurement using a thermal sensor module. TBS's 2D Eye Thermo system combines face, iris and temperature measurement using a thermal sensor module Another TBS system is a 3D Touchless Fingerscan system that provides accuracy and tolerance, anti-spoofing, and is resilient to water, oil, dust and dirt. The 2D+ Multispectral for fingerprints combines 2D sensing with “multispectral” subsurface identification, which is resilient to contaminants and can read fingerprints that are oily, wet, dry or damaged – or even through a latex glove. In addition, the 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue. The system fills the market gap for consent-based true on-the-fly systems, says Zarrabi. The system captures properties of the hand and has applications in the COVID environment, he says. The higher accuracy and security ratings are suitable for critical infrastructure applications, and there is no contact; the system is fully hygienic. Integration with access control systems Integration of TBS biometrics with a variety of third-party access control systems is easy. A “middleware” subsystem is connected to the network. Readers are connected to the subsystem and also to the corporate access control system. An interface with the TBS subsystem coordinates with the access control system. For example, a thermal camera used as part of the biometric reader can override the green light of the access control system if a high temperature (suggesting COVID-19 infection, for example) is detected. The enrollment process is convenient and flexible and can occur at an enrollment station or at an administration desk. Remote enrollment can also be accomplished using images from a CCTV camera. All templates are encrypted. Remotely enrolled employees can have access to any location they need within minutes. The 3D+ system by TBS provides frictionless, no-contact readings even for people going through the system in a queue Although there are other touchless technologies available, they cannot effectively replace biometrics, says Zarrabi. For example, a centrally managed system that uses a Bluetooth signal from a smart phone could provide convenience, is “touchless,” and could suffice for some sites. However, the system only confirms the presence and “identity” of a smart phone – not the person who should be carrying it. “There has been a lot of curiosity about touchless, but this change is strong, and there is fear of a possible second wave of COVID-19 or a return in two or three years,” says Zarrabi. “We really are seeing customers seriously shifting to touchless.”

How To Use Threat Intelligence Data To Manage Security In The Age Of COVID-19
How To Use Threat Intelligence Data To Manage Security In The Age Of COVID-19

COVID-19 has already had a huge impact on the global economy. According to Statista, GDP growth globally will drop from around 3% to 2.4% - equivalent to a drop of around $35 trillion worldwide. In sectors like oil and gas, the impact is particularly acute: IHS Markit predicted that the reduction in oil consumption due to COVID-19 has led to a first-half surplus of 1.8 billion barrels of crude oil. The macroeconomic trends around these worldwide sectors point to harsher economic conditions and recession. For companies in the oil and gas sector running complex operations around the world, this will lead directly to tougher trading environments and a lot of necessary belt-tightening when it comes to costs around operations. Indirectly, the potential recession could cause more civil unrest and security threats for them as well. To cope with these potential challenges, companies will have to look at how they can maintain security for their operations and prevent risks as much as possible. Taking a contextual approach to physical security With these two goals in mind, looking at threat intelligence data should be considered. Threat intelligence refers to a set of data that can be used to judge current and future trends around risks, from everyday crime or political changes through to larger events like civil unrest, terrorism or the current pandemic. Based on data around these issues, companies can make better decisions on how they invest and manage their security posture in advance. Behind this overall approach, however, there are a significant number of moving parts that have to be considered. This includes where the data comes from, how it is used, and who is using the data. Companies can make better decisions on how they invest and manage their security posture The first consideration for threat intelligence is where data comes from. Typically, companies with large oilfields or refinery operations will have large investments in physical security to protect these environments, and part of this spend will include intelligence on local market, political and security conditions. Using this forecast data, your security leadership team can ensure that they have the right resources available in advance of any particular problem. This data can come from multiple sources, from social media data and crowdsourced information through to government, police and private company feeds. This mass of information can then be used to inform your planning and decision making around security, and how best to respond. However, one issue for oil and gas companies with distributed operations is how much data they have to manage over time. With so many potential sources of information all feeding back in real time, it’s hard to make sense of what comes in. Similarly, companies with international teams may have different sets and sources of data available to different parts of their organizations - while each team has its own view of what is going on, they may be missing out on contextual data from other sources held by neighbouring teams or by the central security department. Without a complete picture, it is easy to miss out on important information. Making threat intelligence smarter To solve this problem - and to reduce the costs around managing threat intelligence data - centralizing your approach can make it easier to provide that context to all your teams and stakeholders. Rather than letting each team set up and run their own threat intelligence approach, centralizing the data and letting each team use this can reduce costs. More importantly, it can improve the quality of your threat intelligence approach overall. By applying a combination of algorithms and security analysts to evaluate threat intelligence centrally, you can improve the quality of the data that you have coming into the organization in the first place. This approach provides higher quality data for decision making. However, a centralized approach is not enough on its own. Local knowledge and analysis is always useful. Consequently, alongside any centralization approach you have to have better filtering and search capabilities, otherwise you risk teams not being able to get the information that is particularly relevant and timely to them. This approach of bringing together centralized management of data feeds with more powerful tools for local teams to find what they want and get that access in real time represents the best of both worlds. Planning ahead Scenarios vary from a best case return to pre-crisis revenues of $50 to $60 per barrel by 2021 or 2022 According to consultancy firm McKinsey, the oil and gas sector faces an enormous challenge over the next few years. Scenarios vary from a best case return to pre-crisis revenues of $50 to $60 per barrel by 2021 or 2022, through to a worst case scenario where demand never returns and the industry has to undertake managed decline around some assets and look for new market opportunities in others. Whatever scenario plays out in the real world, security for existing assets will be a continued requirement. Planning ahead using threat intelligence data will be essential whatever happens. To help reduce costs and improve data quality, centralizing this approach will help. Without this mix of global oversight and local detail, companies will find their operations hampered and wrong decisions are made. It’s only by applying threat intelligence data in the right context that security teams will be able to keep up with the challenges of the future.

What Are the Security Challenges of the Oil and Gas Market?
What Are the Security Challenges of the Oil and Gas Market?

Protecting the oil and gas market is key to a thriving economy. The list of security challenges for oil and gas requires the best technology solutions our industry has to offer, from physical barriers to video systems to cybersecurity. We asked this week’s Expert Panel Roundtable: What are the security challenges of the oil and gas market?