Gradiant leads a project to develop a technology capable of verifying the identity of citizens in the online processes of public services in a secure, easy-to-use, and private way. To do so, the alliance will work on the concept of Electronic Identity (eID), the way users can identify themselves through the network and will use Artificial Intelligence and Blockchain technologies to ensure the process. This is IMPULSE (Identity Management in PUbLic SErvices), an initiative with a budget of around four million euros and involving up to 16 entities from 9 different countries.

Beyond its functionalities, IMPULSE seeks to be a tool to make easier the digitalization of the European public sector. Digital processes are increasingly used by citizens. The current health crisis around the world has limited personal interactions, digitizing all kinds of procedures.

This brings a number of problems, not only for those unfamiliar with the complex identification systems on the internet, but also for those who are not comfortable providing personal data over the internet.

Association for ethical and legal requirements

16 partners that make up this consortium will create a tool to meet all the requirements so it can be useful for public services The 16 partners that make up this consortium will create a tool to meet all the ethical and legal requirements so it can be useful for public services in all the countries of the European Union, regardless of the culture and degree of digitalization. IMPULSE will become the clear representation of an efficient, useful, and safe modernization.

The combination of Artificial Intelligence (AI) and Blockchain will offer a technology advantage over the most common systems. This was confirmed earlier this week at the project kick off meeting. At the event, all partners were very optimistic about the results that the initiative will offer and the pace of work that is expected to be maintained throughout the project thanks to the experience and professionalism of those involved.

The consortium, made up of partners from Spain, Italy, Austria, Bulgaria, Germany, Finland, Iceland, France, and Denmark, is funded by the European Union with €4 million under the Horizon 2020 programme. Spain will receive more than €1.1 million in funding.

Digitalization of public services

The digitalization of public administration services is one of the seven flagship initiatives identified in the NextGen Europe programme, which gives an idea of the strategic dimension of IMPULSE.

In this context, the project was born with a clear objective of facilitating the access of citizens to these services but without giving up the maximum guarantees of security, something essential if we want to move towards a fully digitized and inclusive society,” explains Luis Pérez-Freire, Executive Director at Gradiant, the Spanish RTO leading the IMPULSE project.

AI and blockchain for electronic identification processes

In a world where it is increasingly common to carry out all kinds of processes online, avoiding fraud and deception is only possible with first-class technology. Approved in the call Transformative impact of disruptive technologies in public services (DT-TRANSFORMATIONS-02-2018-2019-2020), IMPULSE will develop a system to respond to the needs of citizens and public administrations in digital processes. IMPULSE will incorporate advanced face biometrics based on AI and blockchain technology will not disclose users identity to third parties

IMPULSE’s innovation focuses on combining two of the most promising technologies available, such as Artificial Intelligence and Blockchain networks, with the aim of improving the management of digital identity and electronic identification in the public sector. The technology with the potential to overcome these challenges so its application in the field of digital identity will substantially improve the existing electronic identification systems.

Most citizens have an electronic identity card to carry out the authentication processes with the online services offered by the administration; however, its use is cumbersome due in large part to the lack of user-friendly interfaces for the common citizen. To overcome this adversity, IMPULSE will incorporate advanced face biometrics and document validation techniques based on AI to facilitate identification processes and provide the user with a digital onboarding experience that is fully transparent.

In addition, blockchain technology and the use of smart contracts will allow adding trustworthiness in the process, providing mechanisms for users to demonstrate the identity without the need to disclose the personal data to third parties, a priority, not reliable. In this way, the citizen will maintain total control of the data and will be able to verify at all times the use that is being given to them.

16 high-profile partners

To this end, IMPULSE has EUR 4 million in funding from the European Union through the Horizon2020 program. In addition, in this project Gradiant works with up to 16 top-level partners:

  • Lappeenrannan-Lahden Teknillinen Yliopisto (Finland)
  • Agency for European Integration and Economic Development (Austria)
  • Association du Pole de Competitivite Transactions Electroniques Securisees –DIH (France)
  • Aarhus Municipality (Denmark); Departamento de seguridad del Gobierno Vasco (Spain)
  • Gijón City Council (Spain); Municipality of Peshtera (Bulgaria)
  • City of Reykjavik, Department of Services and Operations (Iceland)
  • Unione italiana delle Camere di commercio, industria, artigianato e agricoltura (Italy); CyberEthics Lab Srls (Italy)
  • ALiCE Biometrics (Spain)
  • Fraunhofer Institute for Systems and Innovation Research (Germany)
  • Tree Technology SA (Spain); Infocert S.p.A. (Italy)
  • y DIN Deutsches Institut für Normung e. V. (Germany)
Download PDF version Download PDF version

In case you missed it

What Is The Role Of Gunshot Detectors In The Security Ecosystem?
What Is The Role Of Gunshot Detectors In The Security Ecosystem?

Sadly, active shooter incidents have become so common that they no longer grab big headlines or dominate the news cycle. A near-constant cascade of active shooter events persists in the background of our collective consciousness, a familiar drumbeat that is no less tragic because it is continuous. As more active shooter incidents occur, the security marketplace continues to implement solutions to minimize the impact, including gunshot detection. We asked this week's Expert Panel Roundtable: What is the role of gunshot detectors in today’s security ecosystem? 

Mythic’s AI Chip Leverages Analog Technology For Faster Speed, Less Power
Mythic’s AI Chip Leverages Analog Technology For Faster Speed, Less Power

For security professionals who thought analog systems were a thing of the past, a new approach by Mythic Inc. demonstrates that everything old is new again. Using older technology in a new way, the Mythic M1076 Analog Matrix Processor leverages analog computer chips from a previous generation to drive new levels of artificial intelligence (AI) performance with lower power requirements.  Low power and high speed  Mythic provides power-efficient AI at the edge, including inside video cameras. The design combines embedded flash memory with analog computing power to achieve faster AI processing, supporting up to 25 trillion operations per second (TOPS), with the very-low power levels conducive to edge devices. The scalable, single-chip analog compute-in-memory architecture provides high-performance inference without consuming the power and energy that digital solutions require to move data at high speeds between separate processing and storage components. Single-chip design  High-resolution video analytics with low latency, comparable to a GPU, is provided by AI, but at 10 times less power “We use a different approach to processing and storage by resurrecting analog technology for faster computing power in a limited size and cost,” says Tim Vehling, Senior Vice President, Product and Business Development at Mythic. The Mythic chip solves several design challenges for camera manufacturers. The single-chip design with no DRAM (dynamic random-access memory) caters to limited space requirements. High-resolution video analytics with low latency, comparable to a graphics processing unit (GPU), is provided by AI, but at 10 times less power than a typical system on chip (SoC) or GPU. The typical 3-4-watt power draw is consistent with a limited power budget for power over Ethernet (PoE). Passive heat dissipation does not require active thermal management. Applications of the analog chip For video applications, the chip provides faster speed to accommodate more cameras, more resolution, and more details in images. In addition to providing scalability, the chip supports a variety of host platforms, including X86, NVIDIA Jetson Xavier NX/TX2, Qualcomm RB5, and NXP i.MX8M. It supports Linux Ubuntu 18.04 and Linus for Tegra (NVIDIA) operating systems. The chips can plug into NVIDIA or Qualcomm platforms to enhance AI capabilities for a variety of applications. The chip also has utility in other deployments, including drones, where Mythic works with the Qualcomm RBS platform to enable multi-thousand-dollar drones for larger applications. Integration into devices The chip can augment the capabilities of a CPU without replacing it or completely redesigning a product The chip handles image sensing, multiple cameras, radar, and lidar sensors, in addition to flight navigation, control, and communication, in addition to in-flight analytics. Inside NVRs, Mythic chips provide high-level processing at a fraction of the cost, says Vehling. Integration of the technology into cameras and other products is simple – it simply plugs into an M.2 expansion slot, and the software is downloaded to drive the AI algorithms. The chip can augment the capabilities of a CPU without replacing it or completely redesigning a product, in effect providing an instantaneous improvement in performance. No shortage Because Mythic uses older technology, there are no shortages compared to some later-generation chips. The 40-nanometer chips are a mature technology, manufactured in Japan, while newer processors are smaller at 5 or 7 nanometers. The newer chips are more likely to be in short supply. The Mythic M1076 chip is currently being evaluated but is not yet in production. The company expects to be shipping the product in the second half of 2022, and it will be sold to camera manufacturers and other OEMs to be incorporated into their products.  Adds value inside cameras For security end-users, Mythic’s AI chips will add new value inside video cameras and other equipment in terms of better performance, small size, and less power. For integrators, the technology will expand equipment options, such as providing high-level analytics in cameras while requiring only 2 to 3 watts of power, consistent with the use of PoE.

Why Face Recognition As A Credential Is The Ideal Choice For Access Control?
Why Face Recognition As A Credential Is The Ideal Choice For Access Control?

In the field of access control, face recognition has come a long way. Once considered too slow to authenticate people's identities and credentials in high traffic conditions, face recognition technology has evolved to become one of the quickest, most effective access control identity authentication solutions across all industries. Advancements in artificial intelligence and advanced neural network (ANN) technology from industry leaders like Intel have improved the accuracy and efficiency of face recognition. However, another reason the technology is gaining traction is due to the swiftly rising demand for touchless access control solutions that can help mitigate the spread of disease in public spaces. Effective for high volumes Face recognition eliminates security risks and is also virtually impossible to counterfeit Modern face recognition technology meets all the criteria for becoming the go-to solution for frictionless access control. It provides an accurate, non-invasive means of authenticating people's identities in high-traffic areas, including multi-tenant office buildings, industrial sites, and factories where multiple shifts per day are common. Typical electronic access control systems rely on people providing physical credentials, such as proximity cards, key fobs, or Bluetooth-enabled mobile phones, all of which can be misplaced, lost, or stolen. Face recognition eliminates these security risks and is also virtually impossible to counterfeit. Affordable biometric option Although there are other biometric tools available, face recognition offers significant advantages. Some technologies use hand geometry or iris scans, for example, but these options are generally slower and more expensive. This makes face recognition a natural application for day-to-day access control activities, including chronicling time and attendance for large workforces at construction sites, warehouses, and agricultural and mining operations. In addition to verifying personal credentials, face recognition can also identify whether an individual is wearing a facial covering in compliance with government or corporate mandates regarding health safety protocols. Beyond securing physical locations, face recognition can also be used to manage access to computers, as well as specialized equipment and devices. Overcoming challenges with AI So how did face recognition become so reliable when the technology was once dogged by many challenges, including difficulties with camera angles, certain types of facial expressions, and diverse lighting conditions? Thanks to the emergence of so-called "convolutional" neural network-based algorithms, engineers have been able to overcome these roadblocks. SecurOS FaceX face recognition solution FaceX is powered by neural networks and machine learning which makes it capable of authenticating a wide range of faces One joint effort between New Jersey-based Intelligent Security Systems (ISS) and tech giant Intel has created the SecurOS FaceX face recognition solution. FaceX is powered by neural networks and machine learning which makes it capable of authenticating a wide range of faces and facial expressions, including those captured under changing light, at different resolution levels, and varying distances from the video camera. Secure video management system A common face recognition system deployment begins with IP video cameras that feed footage into a secure video management system connected to a video archive. When the software initially enrolls a person’s face, it creates a "digital descriptor" that is stored as a numeric code that will forever be associated with one identity. The system encrypts and stores these numeric codes in a SQL database. For the sake of convenience and cost savings, the video server CPU performs all neural network processes without requiring any special GPU cards. Unique digital identifiers The next step involves correlating faces captured in a video recording with their unique digital descriptors on file. The system can compare newly captured images against large databases of known individuals or faces captured from video streams. Face recognition technology can provide multi-factor authentication, searching watchlists for specific types of features, such as age, hair color, gender, ethnicity, facial hair, glasses, headwear, and other identifying characteristics including bald spots. Robust encryption SED-compatible drives rely on dedicated chips that encrypt data with AES-128 or AES-256 To support privacy concerns, the entire system features an encrypted and secure login process that prevents unauthorized access to both the database and the archive. An additional layer of encryption is available through the use of Self-Encrypting Drives (SEDs) that hold video recordings and metadata. SED-compatible drives rely on dedicated chips that encrypt data with AES-128 or AES-256 (short for Advanced Encryption Standard). Anti-spoofing safeguards How do face recognition systems handle people who try to trick the system by wearing a costume mask or holding up a picture to hide their faces? FaceX from ISS, for example, includes anti-spoofing capabilities that essentially check for the "liveliness" of a given face. The algorithm can easily flag the flat, two-dimensional nature of a face mask, printed photo, or image on a mobile phone and issue a "spoof" alarm. Increased speed of entry Incorporating facial recognition into existing access control systems is straightforward and cost-effective Incorporating facial recognition into existing access control systems is straightforward and cost-effective. Systems can operate with off-the-shelf security cameras and computers. Users can also leverage existing infrastructure to maintain building aesthetics. A face recognition system can complete the process of detection and recognition in an instant, opening a door or turnstile in less than 500ms. Such efficiency can eliminate hours associated with security personnel checking and managing credentials manually. A vital tool Modern face recognition solutions are infinitely scalable to accommodate global enterprises. As a result, face recognition as a credential is increasingly being implemented for a wide range of applications that transcend traditional access control and physical security to include health safety and workforce management. All these capabilities make face recognition a natural, frictionless solution for managing access control, both in terms of performance and cost.