The Dahl Auto Plaza in Winona, Minnesota is part of an auto dynasty that first began in 1911, when Andrew H. Dahl began selling Ford Model T’s out of his general store in Westby, Wisconsin. The company is in its fifth generation of Dahl family ownership with over a century of growth behind it.

Today Dahl operates three dealership campuses throughout the Midwestern United States that are home to Subaru, Hyundai, Mazda, Toyota, Chevrolet, Buick, GMC, Ford, and Lincoln automobile franchises. During construction of the Dahl Auto Plaza in Winona, the installation of a video surveillance system was a required part of the planning. AV Costar became the go-to manufacturer for all the dealership’s surveillance cameras.

Video Surveillance System Challenge

Winona’s Dahl is home to three different dealerships on a single campus — Chevy, Toyota, and the Dahl Used Car Express Service Center. The company needed a comprehensive video surveillance system to monitor its parking lots and service bays for traffic, customer flow, vehicle flow, vandalism, and theft. With a desired 15-16 camera limit to cover such a large amount of space, cameras with high image quality and flexibility were essential to the surveillance system’s success.

No other camera manufacturer could compete with the price and performance of the AV Costar Omni series

AV Costar Try-and-Buy Program

The implementation of AV Costar megapixel cameras at Dahl Winona began with the use of AV Costar’s Try-and-Buy program at the recommendation of Russ Neitzke, President and Founder of systems integrator Digicom, Inc. Cameras selected for a Try-and-Buy trial can be returned by the systems integrator for a full refund of the purchase price if the customer is unsatisfied.

The only cameras considered for the Dahl video surveillance system were AV Costar SurroundVideo Omni models after they were tested. “No other camera manufacturer could compete with the price and performance of the AV Costar Omni series,” Mr. Neitzke said. “As a result, no other surveillance camera manufacturers were recommended by Digicom, Inc. or would be able to so effectively cover the 15 acres of new and used vehicle display, public access, and vehicle service areas at the new Dahl Auto Plaza.”

SurroundVideo Omni Unique Design

The SurroundVideo Omni series features a unique, patented 360o track design. Each camera includes four individual megapixel (MP) sensors mounted in multi-axis gimbals that can be independently placed and aimed in nearly any configuration, allowing coverage to be highly customized to specific project requirements.

With features like remote focus in the SurroundVideo Omni G2, interchangeable lenses and high-resolution capabilities (12 and 20MP) in both G1 and G2 series models, the versatility of this camera family is unmatched.

For large open spaces such as those found at the Dahl campus, the SurroundVideo Omni series provides high resolution, omni-directional video in a rugged, low profile enclosure suitable for both indoor and outdoor use. The cameras are IK-10 impact resistant and IP66 environmental rated against dust and water, making them ideal for Dahl’s requirements.

Reduced Need For Multiple Cameras

Most critical for Dahl were the SurroundVideo Omni series benefits of low maintenance, high video resolution, and the ability to reduce the number of cameras required for full situational awareness throughout the campus. The SurroundVideo Omni 12MP models selected include Wide Dynamic Range (WDR) technology, which aids in producing high quality, clear images even in challenging light situations.

the implementation of Arecont Vision megapixel cameras at Dahl Winona began with the use of Arecont Vision's try-and-buy program
The SurroundVideo Omni reduces the need for multiple cameras to cover open spaces, saving the customer money

With Digicom Inc. designing the surveillance and installation plans, Dahl was in good hands. Dahl selected the SurroundVideo Omni series, reaping the significant benefit of reduced installation time. Each sensor gimbal in a SurroundVideo Omni is magnetically set in place around the 70+ placement-point omnidirectional track and then quickly locked down during installation.

The SurroundVideo Omni reduces the need for multiple cameras to cover open spaces, saving the customer money on both camera cost and installation requirements. Without the need for the constantly moving parts of a legacy Pan-Tilt-Zoom (PTZ) camera, there are no parts, gears, belts, or motors to wear out and to require maintenance in the SurroundVideo Omni series. This reduces ongoing operational costs.

This makes it easy for the installer to arrange an ideal coverage layout. Another significant selling point for Dahl was that each SurroundVideo Omni camera requires only a single IP category 5 PoE (Power over Ethernet) cable, which reduces both complexity and installation cost.

ExacqVision VMS

Dahl can monitor the surveillance system locally, corporate-wide, and on various smartphones and tablets. AV Costar Technology Partner Program member ExacqVision is utilised for the video management system (VMS). A single ExacqVision VMS license is required for each SurroundVideo Omni camera, while providing four high-definition video views.

AV Costar cameras are certified with ExacqVision and the VMS is installed in the AV Costar MegaLab™ to enable ongoing collaboration between the two companies and to ensure the best possible integration and support for customers.

Dahl can monitor the surveillance system locally, corporate-wide, and on various smartphones and tablets

Arecont Success At Dahl

The AV Costar SurroundVideo Omni cameras at Dahl have been a great success, with high customer satisfaction. “Basically,” Mr. Neitzke stated, “The coverage that you get with the SurroundVideo Omni is really like buying four cameras in one.” Being able to effectively cover Dahl’s range of campus requirements with fewer cameras and lower purchase, installation, and operational costs meant that AV Costar has hit all the required marks for this project, according to Mr. Neitzke.

The system has performed incredibly well, with few issues from the end-user. On the rare occasion when an issue has popped up, the AV Costar team has been responsive to the customer’s needs, providing technical support, advanced replacements, or any other kind of assistance Dahl has needed for the surveillance system.

Future Projects

AV Costar and Dahl are now planning a second, even larger project at Dahl’s campus in downtown La Crosse, Wisconsin. Dahl plans on upgrading this campus with a new surveillance system for indoor and outdoor spaces with AV Costar cameras. Digicom, Inc. and the AV Costar Field Application Engineering groups are developing a campus-wide plan for this next project.

SurroundVideo Omni will be ready to be deployed yet again whenever Dahl needs it.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Sanitization, Safety And Getting Back To Business
Sanitization, Safety And Getting Back To Business

You are not alone: operators everywhere are asking themselves what are they going to do? How are they going to get back to business, and fast? How are they going to cost-effectively operate with all the new safety requirements that have arisen as a result of COVID? How are they going to ensure it all gets done for the safety of customers and staff? How are they going to protect their brand from the negative exposure of being identified as a property with a reputation for COVID? The economic impact of COVID is expected to hit brick and mortar businesses the worst, as their businesses are dependent on people being physically present. According to a recent report by RBC, it is estimated that 70% of Americans expect to avoid public spaces, 57% of Canadians will be unwilling to attend conferences without a vaccine and 63% of people will prefer to drive vs fly.  This means, that for those of you in the business of travel, conferences, co-working spaces, retail stores, museums, art galleries, restaurants, sports arenas, hotels, cruises, airlines, resorts, theme parks, long-term care, education, etc. in the blink of an eye your approach to on-site safety just changed. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitisation To get back to business and operating at full capacity after COVID, operations must find a way to eliminate the fear, uncertainty and doubt in the minds of their customers and employees. The affect of COVID-19 on safety and security To safely get back to business, the Centers of Disease Control and Prevention (CDC) emphasis that all operations need a pandemic response planJust like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budget. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitization, the lines between the security and maintenance just blurred. From customers, to employees, to government regulators, to management, the focus is now on operations and the sanitization policies, procedures and actions of the team. To put this change of priority into perspective, six months ago, sanitisation was not top of mind for people. Why, because it was not a life or death issue, we had other first world problems to garner our attention. From an operations perspective if we enabled a sanitization issue to become significant enough to impact the safety of customers and staff and therefore the brand, then that was an operational choice versus a mistake. Standards for sanitisation  Just like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budgetThe issue is, today while the operating priority of sanitization has significantly increased, it is not measured and managed to the same standard as the other safety and security concerns across a business. Also, important to consider, while people may not hold an operation liable during this first wave, we can guarantee they are not going to be as understanding during the second wave or a future pandemic. To safely get back to business, the Centers of Disease Control and Prevention (CDC) and the Occupational Health and Safety regulators emphasis that all operations need a pandemic response plan and should follow these simple guidelines: Develop your plan Implement your plan Maintain and revise your plan While this sounds simple enough, keep in mind that requirements are constantly evolving and will continue to do so for the foreseeable future, or at least until all the research is in. To create an emergency response plan for a pandemic, properties must first determine what needs to be sanitized. The current requirements dictate that most surfaces and objects will just need a normal routine cleaning, it is only the frequently touched surfaces and objects like light switches and COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-havedoorknobs that will need to be cleaned and then disinfected to further reduce the risk of germs on surfaces and objects. The challenge is when you step back and consider what people touch in a day; the list quickly grows. After only 30 minutes, I easily came up with a list of over 60 items that one could call ‘high touch’! If you think about it, the list is extensive; telephones, doorknobs, drawer handles, counters, pens, keypads, computers, etc. and the list is only going to get longer as the research comes in.   The challenge is when you step back and consider what people touch in a day; the list quickly grows Operating efficiency  If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper and filing cabinetsTo scope the impact on operations as part of the plan, we must then find and identify all of those high touch things across the property. If we then combine that with the fact that CDC requires that all high touch locations must not only be cleaned more often, but that they also require that each location is first cleaned with soap and water, and then disinfected for one minute before finally being wiped down. This means a one-minute task just turned into a 4-minute task, that must now be completed multiple times a day. From a resourcing perspective this adds up quickly, and operating efficiency must be a priority. Not to mention it is going to get very complicated to measure and manage especially. Post COVID rules Getting back to business is going to be complicated; lots to do, lots of moving parts and no technology to help. The fundamental challenge to keep in mind is not that the sanitization requirements have evolved, the real issue is that for most businesses this area has been left unchanged for generations. Still today most rely on checklists, logbooks and inspections to manage the responsibilities of our front-line workers, which might have been fine before COVID. Post-COVID the rules have changed and so should the approach to managing physical operating compliance on the front lines. COVID like most physical operating requirements is tactical, detailed and specific; broad strokes, the honor system and inspections are not going to cut it. The digital transformation  COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-have. If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper, filing cabinets filled with checklists, never to be seen again. Only with the right data can we significantly improve the operational decisions necessary to accelerate our return to full operating capacity. At the end of the day, to fully recover, operations must eliminate the fear, uncertainty and doubt in the minds of customers and employees, only then can we really get back to business.

Which Security Technology Is Most Misunderstood, And Why?
Which Security Technology Is Most Misunderstood, And Why?

The general public gets much of its understanding of security industry technology from watching movies and TV. However, there is a gap between reality and the fantasy world. Understanding of security technologies may also be shaped by news coverage, including expression of extreme or even exaggerated concerns about privacy. The first step in addressing any challenge is greater awareness, so we asked this week’s Expert Panel Roundtable: Which security industry technology is most misunderstood by the general public and why?

Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?
Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?

With the postponement of tradeshows and events due to the effects of COVID-19, Vanderbilt and ComNet have taken their high quality, innovative solutions online, directly to their customer base. Through an Online Events and Training resource, you can stay connected with the brands’ top resources and products, as well as join upcoming product webinars hosted by their in-house experts. With a majority of the world currently working from home, businesses must respond to this changing landscape. As such, Vanderbilt and ComNet have turned to online resources to share new product demonstrations and other company news. One cornerstone of the ACRE brands approach was the launch of their Online Events and Training resource page. Ross Wilks, Head of Marketing Communications at Vanderbilt, credits this online resource as the anchor to their communicative success with customers at present. “Through weekly webinars delivered by our in-house experts, Vanderbilt and ComNet have embraced more virtual opportunities to continuously communicate to our customers regarding our latest and most relevant products,” he says. “To date, our webinars have covered a wide range of industry topics such as Why Physical Security and Cloud go together, and The most recent developments in card cloning and reader hacking. Attendance to these online events has proved popular and effective in keeping communication with our customer base open and engaging.” Each webinar ends with a Q&A section, as well as follow-up articles on the most asked questions, plus recordings of the webinars being made available to attendees. As such, the webinar approach has proven a receptive approach for Vanderbilt and ComNet. The Online Events and Training resource acts as a one-stop-shop for all virtual information. Overall, the page outlines the brands’ value-added resources for customers, including the ability to request a remote product demonstration, the availability of free online training, 24/7 access to the Vanderbilt webshop, plus the aforementioned weekly webinars. Vanderbilt and ComNet’s business mantra is built on a foundation of customer-focused core values such as empowerment, collaboration, and high performance and Wilks credits this mentality with their ability to keep information flowing to their base during the present pandemic. “The ACRE brands moved early to kick-start online webinars and ramp up awareness of their already existing online training and shopping options. Now more than ever, it is important to keep customers up to date on the latest offerings,” Wilks explains. “Our commitment has always been to make their customer’s security journey the best possible experience, and that is what this Online Events and Learning page primarily focuses on,” he concludes.