So often, one’s focus in security and access control zeroes in on the hardware. Its latest functionality or compatibility with emerging technologies grabs the headlines. Yet it is the access control software which knits a system together — and the signs are, this is finally getting the attention it deserves in security procurement.

Supported integrations

Today, access control software is more accessible to a wider variety of actors,” writes Bryan Montany, a research analyst at IHS Technology, “providing end-users with broader and more comprehensive data relating to patterns in building occupancy.”

Software has also supported integrations with other security systems, enabling security managers to respond in real time to emerging incidents and potential security breaches.”

Software solutions

In other words, one can escape the limiting functionality of outmoded access management with a new generation of software solutions. They can fix everyday access irritants and below are seven.

  • Freedom from the access management terminal

Multi-seat management should be a given. One’s intuitive, customized dashboard could have a personalized login screen configuration for every administrator. Software should offer flexible management options, including secure system administration from anywhere and multi-timezone capability options. An access management “terminal” should be tied to the person — not the other way around.

  • Maximum flexibility, whatever the legacy system

Access control software puts in the hard yards when it bends the existing system or setup to new needs. It can integrate across several databases, making workflows easier and less error prone. One may even wish to manage any existing mechanical locks from the same interface as the electronic or electromechanical locks. The right access control software handles that for the person.

  • Tailored access for every site user and visitor

Streamlining access rights management for staff, contractors and visitors can boost business efficiency. The access control software should filter access to specific locks according to the precise security needs of the site and users. For any system, one should be able to create individual schedules for key-holders, doors or audit trails. In a few clicks one can require users to revalidate keys regularly, making it safer to issue a contractor with time-limited access.

  • Smarter, more effective building management

Smart buildings need intelligent software. Is it known who uses which doors at the site, and when? Is one planning an office expansion and weighing up appropriate security for each type of room use? A properly configured software control panel should accurately track user movement around the site. It feeds back the data needed to make better business decisions.

  • Saving security budgets with a Software as a Service (SaaS) option

Ideally, one would want to spend the security budget on actually securing people and assets. In the real world, IT costs and contingency budgeting eat up much of it. When one runs access management software with a reliable SaaS provider, security infrastructure budgeting becomes more predictable. The data enjoys complete redundancy and is therefore more secure. And the company’s software is always, automatically up to date — critical for cyber security resilience.

  • Mobile solutions for the modern mobile workforce

Are mobile workers and contractors returning to base — or the nearest credential updater — to redefine or revalidate their access rights? Access control software can (and should) be mobile. So, instead of updaters, workers update credentials on the go, wherever they are, via an app and its encrypted Bluetooth connection.

  • All business process software in one place

Multiple systems create double or triple the work. Duplicating data entry increases the chance of errors. With access control powered by the CLIQ Web Manager, for example, one can integrate powerful access management features with the existing business process software. One hub for everything.

Thanks to the CLIQ Web Manager’s open architecture, one can build a single interface to control all “live” workflows. Manage HR, support ticketing, financial reporting and more, alongside daily access control tasks like validating and revalidating credentials, cancelling lost keys and ordering automated audit trails for locks or users.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

Water Plant Attack Emphasizes Cyber’s Impact On Physical Security
Water Plant Attack Emphasizes Cyber’s Impact On Physical Security

At an Oldsmar, Fla., water treatment facility on Feb. 5, an operator watched a computer screen as someone remotely accessed the system monitoring the water supply and increased the amount of sodium hydroxide from 100 parts per million to 11,100 parts per million. The chemical, also known as lye, is used in small concentrations to control acidity in the water. In larger concentrations, the compound is poisonous – the same corrosive chemical used to eat away at clogged drains. The impact of cybersecurity attacks The incident is the latest example of how cybersecurity attacks can translate into real-world, physical security consequences – even deadly ones.Cybersecurity attacks on small municipal water systems have been a concern among security professionals for years. The computer system was set up to allow remote access only to authorized users. The source of the unauthorized access is unknown. However, the attacker was only in the system for 3 to 5 minutes, and an operator corrected the concentration back to 100 parts per million soon after. It would have taken a day or more for contaminated water to enter the system. In the end, the city’s water supply was not affected. There were other safeguards in place that would have prevented contaminated water from entering the city’s water supply, which serves around 15,000 residents. The remote access used for the attack was disabled pending an investigation by the FBI, Secret Service and Pinellas County Sheriff’s Office. On Feb. 2, a compilation of breached usernames and passwords, known as COMB for “Compilation of Many Breaches,” was leaked online. COMB contains 3.2 billion unique email/password pairs. It was later discovered that the breach included the credentials for the Oldsmar water plant. Water plant attacks feared for years Cybersecurity attacks on small municipal water systems have been a concern among security professionals for years. Florida’s Sen. Marco Rubio tweeted that the attempt to poison the water supply should be treated as a “matter of national security.” “The incident at the Oldsmar water treatment plant is a reminder that our nation’s critical infrastructure is continually at risk; not only from nation-state attackers, but also from malicious actors with unknown motives and goals,” comments Mieng Lim, VP of Product Management at Digital Defense Inc., a provider of vulnerability management and threat assessment solutions.The attack on Oldsmar’s water treatment system shows how critical national infrastructure is increasingly becoming a target for hackers as organizations bring systems online “Our dependency on critical infrastructure – power grids, utilities, water supplies, communications, financial services, emergency services, etc. – on a daily basis emphasizes the need to ensure the systems are defended against any adversary,” Mieng Lim adds. “Proactive security measures are crucial to safeguard critical infrastructure systems when perimeter defenses have been compromised or circumvented. We have to get back to the basics – re-evaluate and rebuild security protections from the ground up.” "This event reinforces the increasing need to authenticate not only users, but the devices and machine identities that are authorized to connect to an organization's network,” adds Chris Hickman, Chief Security Officer at digital identity security vendor Keyfactor. “If your only line of protection is user authentication, it will be compromised. It's not necessarily about who connects to the system, but what that user can access once they're inside. "If the network could have authenticated the validity of the device connecting to the network, the connection would have failed because hackers rarely have possession of authorized devices. This and other cases of hijacked user credentials can be limited or mitigated if devices are issued strong, crypto-derived, unique credentials like a digital certificate. In this case, it looks like the network had trust in the user credential but not in the validity of the device itself. Unfortunately, this kind of scenario is what can happen when zero trust is your end state, not your beginning point." “The attack on Oldsmar’s water treatment system shows how critical national infrastructure is increasingly becoming a target for hackers as organizations bring systems online for the first time as part of digital transformation projects,” says Gareth Williams, Vice President - Secure Communications & Information Systems, Thales UK. “While the move towards greater automation and connected switches and control systems brings unprecedented opportunities, it is not without risk, as anything that is brought online immediately becomes a target to be hacked.” Operational technology to mitigate attacks Williams advises organizations to approach Operational Technology as its own entity and put in place procedures that mitigate against the impact of an attack that could ultimately cost lives. This means understanding what is connected, who has access to it and what else might be at risk should that system be compromised, he says. “Once that is established, they can secure access through protocols like access management and fail-safe systems.”  “The cyberattack against the water supply in Oldsmar should come as a wakeup call,” says Saryu Nayyar, CEO, Gurucul.  “Cybersecurity professionals have been talking about infrastructure vulnerabilities for years, detailing the potential for attacks like this, and this is a near perfect example of what we have been warning about,” she says.  Although this attack was not successful, there is little doubt a skilled attacker could execute a similar infrastructure attack with more destructive results, says Nayyar. Organizations tasked with operating and protecting critical public infrastructure must assume the worst and take more serious measures to protect their environments, she advises. Fortunately, there were backup systems in place in Oldsmar. What could have been a tragedy instead became a cautionary tale. Both physical security and cybersecurity professionals should pay attention.

What Are The Positive And Negative Effects Of COVID-19 To Security?
What Are The Positive And Negative Effects Of COVID-19 To Security?

The COVID-19 global pandemic had a life-changing impact on all of us in 2020, including a multi-faceted jolt on the physical security industry. With the benefit of hindsight, we can now see more clearly the exact nature and extent of that impact. And it’s not over yet: The pandemic will continue to be top-of-mind in 2021. We asked this week’s Expert Panel Roundtable: What have been the positive and negative effects of Covid-19 on the physical security industry in 2020? What impact will it have on 2021?

Expert Roundup: Healthy Buildings, Blockchain, AI, Skilled Workers, And More
Expert Roundup: Healthy Buildings, Blockchain, AI, Skilled Workers, And More

Our Expert Panel Roundtable is an opinionated group. However, for a variety of reasons, we are sometimes guilty of not publishing their musings in a timely manner. At the end of 2020, we came across several interesting comments among those that were previously unpublished. Following is a catch-all collection of those responses, addressing some of the most current and important issues in the security marketplace in 2021.