Antaira Technologies a global developer and manufacturer of industrial networking devices and communication solutions for harsh environment applications and is proud to announce the expansion of its industrial networking infrastructure family with the introduction of the LNP-1600G, -1802G-SFP, and -2004G-SFP series.

As PoE technology has become increasingly popular in many industrial markets including automation manufacturing, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation industries have adopted PoE (Power-over-Ethernet) ready devices; such as, cameras, VoIP phones, wireless radios, and access controllers into their production networks.

Works In Harsh Environments

Antaira’s LNP series work well in harsh or outdoor environments that require rugged power sourcing equipment (PSE) with high-density Ethernet port connectivity, wide bandwidth, long-distance data transmission, and reliability.

Antaira Technologies’ LNP-1600G, -1802G-SFP, and -2004G-SFP series are the latest industrial Gigabit unmanaged Ethernet switch series that offer high density for sixteen full gigabit Ethernet ports (-1600G, -1802G-SFP, and -2004G-SFP) with each port supporting PSE maximum of 30W and have two or four SFP gigabit fiber slots (-1802G-SFP and -2004G-SFP) for long distance connectivity. These product series have an IP30 rated metal casing design that can support DIN-Rail and wall mountable orientations.

Overload Current And Reverse Polarity Prevention

The devices provide a dual redundant power input range of 48 to 55VDC with an overload current and reverse polarity prevention. The series also has a high EFT, surge protection (2,000VDC), and ESD (6,000VDC) protection. Additionally, there is a built-in relay warning function to alert maintainers when power failures occur. Each unit is built to withstand industrial networking hazards like shock, drop, vibration, electromagnetic interference (EMI) and temperature extremes.

Wide operating temperature version options include a standard (-10° ~ 65°C) model or an extended (-40° ~ 75°C) model. The units conform to the following dimensions of 67mm (W) x 99mm (D) x 142mm (H) and a unit weight of 2.69 pounds (LNP-1600G and LNP-1802G-SFP) or 2.75 pounds (LNP-2004G-SFP).

Download PDF version

In case you missed it

Virtual Worlds Disrupt Building Security & Facility Management
Virtual Worlds Disrupt Building Security & Facility Management

From satellite imagery to street views to indoor mapping, technology has disrupted our past world. This has left us dependent upon new ways to visualise large spaces. This new world has brought many benefits and risks. But what does that mean for the security professional or facility manager today and what technologies can be used to secure buildings and improve facility operations? A Brief History Of 3D Technology Starting May 5, 2007 (inception 2001), Google rolled out Google Street View to augment Google Maps and Google Earth; documenting some of the most remote places on earth using a mix of sensors (Lidar/GSP/Radar/Imagery). The mission to map the world moved indoors May 2011 with Google Business Photos mapping indoor spaces with low cost 360° cameras under the Trusted Photographer program. In the earlier days, 3D scanning required a high level of specialization, expensive hardware and unavailable computing power With the growth of 3D laser scanning from 2007 onwards, the professional world embraced scanning as effective method to create digitised building information modeling (BIM), growing fast since 2007. BIM from scanning brought tremendous control, time and cost savings through the design and construction process, where As-Built documentation offered an incredible way to manage large existing facilities while reducing costly site visits. In the earlier days, 3D scanning required a high level of specialization, expensive hardware, unavailable computing power and knowledge of architectural software. Innovation during the past 8 year, have driven ease of use and lower pricing to encourage market adoption. Major investments in UAVs in 2014 and the commercial emergence of 360° photography began a new wave of adoption. While 3D scanners still range from $20K – $100K USD, UAVs can be purchased for under $1K USD and 360° cameras for as low as $100. UAVs and 360° cameras also offer a way to document large spaces in a fraction of the time of terrestrial laser scanners with very little technical knowledge.  Access to building plans, satellite imagery, Google Street View, indoor virtual tours and aerial drone reconnaissance prove effective tools to bad actors The result over the past 10+ years of technology advancement has been a faster, lower cost, more accessible way to create virtual spaces. However, the technology advances carry a major risk of misuse by bad actors at the same time. What was once reserved to military personal is now available publicly. Access to building plans, satellite imagery, Google Street View, indoor virtual tours and aerial drone reconnaissance prove effective tools to bad actors. Al Qaeda terror threats using Google Maps, 2007 UK troops hit by terrorists in Basra, 2008 Mumbai India attacks, 2016 Pakistan Pathankot airbase attacks, ISIS attacks in Syria using UAVs, well-planned US school shootings and high casualty attacks show evidence that bad actors frequently leverage these mapping technologies to plan their attacks. The weaponization of UAVs is of particular concern to the Department of Homeland Security: "We continue to face one of the most challenging threat environments since 9/11, as foreign terrorist organizations exploit the internet to inspire, enable or direct individuals already here in the homeland to commit terrorist acts."   Example comparison of reality capture on the left of BIM on the right. A $250 USD 360° camera was used for the capture in VisualPlan.net software What Does This Mean For The Security Or Facility Manager Today? An often overlooked, but critical vulnerability to security and facility managers is relying on inaccurate drawing. Most facilities managers today work with outdated 2D plan diagrams or old blueprints which are difficult to update and share.Critical vulnerability to security and facility managers is relying on inaccurate drawing Renovations, design changes and office layout changes leave facility managers with the wrong information, and even worse is that the wrong information is shared with outside consultants who plan major projects around outdated or wrong plans. This leads to costly mistakes and increased timelines on facility projects.  Example Benefits Of BIM There could be evidence of a suspect water value leak which using BIM could be located and then identified in the model without physical inspection; listing a part number, model, size and manufacture. Identification of vulnerabilities can dramatically help during a building emergency. First Responders rely on facilities managers to keep them updated on building plans and they must have immediate access to important building information in the event of a critical incident. Exits and entrances, suppression equipment, access control, ventilation systems, gas and explosives, hazmat, water systems, survival equipment and many other details must be at their fingertips. In an emergency situation this can be a matter of life or death. Example Benefit Of Reality Capture First Responders rely on facilities managers to keep them updated on building plans A simple 360° walk-through can help first responders with incident preparedness if shared by the facility manager. Police, fire and EMS can visually walk the building, locating all critical features they will need knowledge of in an emergency without ever visiting the building. You don’t require construction accuracy for this type of visual sharing. This is a solution and service we offer as a company today. Reality capture is rapidly becoming the benchmark for facility documentation and the basis from which a security plan can be built. Given the appropriate software, plans can be easily updated and shared.  They can be used for design and implementation of equipment, training of personnel and virtual audits of systems or security assessments by outside professionals. Our brains process visual information thousands of times faster than text. Not only that, we are much more likely to remember it once we do see it. Reality capture can help reduce the need for physical inspections, walk-throughs and vendor site-visits but more importantly, it provides a way to visually communicate far more effectively and accurately than before. But be careful with this information. You must prevent critical information falling into the hands of bad actors. You must watch out for bad actors attempting to use reality capture as a threat, especially photo/video/drones or digital information and plans that are posted publicly. Have a security protocol to prevent and confront individuals taking photos or video on property or flying suspect drones near your facility and report to the authorities. Require authorization before capturing building information and understand what the information will be used for and by who.There are a number of technologies to combat nefarious use of UAVs today Nefarious Use Of UAVs There are a number of technologies to combat nefarious use of UAVs today, such as radio frequency blockers and jammers, drone guns to down UAVs, detection or monitoring systems. Other biometrics technologies like facial recognition are being employed to counter the risk from UAVs by targeting the potential operators. UAVs are being used to spy and monitor for corporate espionage and stealing intellectual property. They are also used for monitoring security patrols for the purpose of burglary. UAVs have been used for transport and delivery of dangerous goods, delivering weapons and contraband and have the ability to be weaponised to carry a payload.Investigating reality capture to help with accurate planning and visualization of facilities is well worth the time The Federal Aviation Administration has prevented UAV flights over large event stadiums, prisons and coast guard bases based on the risks they could potentially pose, but waivers do exist. Be aware that it is illegal today to use most of these technologies and downing a UAV, if you are not Department of Justice or Homeland Security, could carry hefty penalties. Facility managers must have a way to survey and monitor their buildings for threats and report suspicious UAV behaviours immediately to authorities. At the same time, it’s critical to identify various potential risks to your wider team to ensure awareness and reporting is handled effectively. Having a procedure on how identify and report is important. Investigating reality capture to help with accurate planning and visualization of facilities is well worth the time. It can help better secure your facilities while increasing efficiencies of building operations. Reality capture can also help collaboration with first responders and outside professionals without ever having to step a foot in the door. But secure your data and have a plan for bad actors who will try to use the same technologies for nefarious goals.

What’s New In U.S. Government Procurement For Security?
What’s New In U.S. Government Procurement For Security?

Last week, the Schedule 84 Suppliers Research Panel participated in reviewing the 2018 contracting year with the GSA Schedule 84 leadership team. Our panel group consists of experienced contractors and consultants meeting for a monthly conference call. Schedule 84 is the GSA Schedules Contract for Total Solutions for Law Enforcement, Security, Facilities Management, Fire and Rescue. Our opinions are part of a research program to provide valuable feedback to the GSA Schedule 84 program and on to the GSA central office. The director of GSA Region 7 Schedules Program, the Schedule 84 Branch Chief and the Category Manager Subject Matter Expert who manages our suppliers' panel gave us their full attention as we discussed the successes of the program, hot topics, problems and the future. We determined 2018 under the Schedule 84 team to be a year of innovative thoughts, cooperative effort and renewed enthusiasm Innovative Review Team We determined 2018 under the Schedule 84 team to be a year of innovative thoughts, cooperative effort, renewed enthusiasm and productive changes building upon the successes of 2017. There was high praise for the accessibility to the Schedule 84 staff. Their consistent quick response to questions and concerns, thinking outside the box and supporting the program by partnering with their contractors was much appreciated. There has been a renewed spirit of partnering to cooperatively bring the best to agency customers. It seems to be working as per the Center Director sales are growing for GSA Schedule 84. Advocating For The Security Industry In my experience, business development starts with the Administrator from Region 7 in Ft. Worth, TX. As the annual Schedule 84 Industry Day at the SSAC begins he is shaking every hand and passing out his cards looking folks right in the eye asking, “how can I help you?” They have the best practices and most organized paperwork. The SSAC director has chosen well in her staff and is hands-on in every endeavor to direct things along when challenges occur or to improve the program. The new 84 Branch Chief is knowledgeable, innovative, tireless and has been heavily involved in advocating for the security industry It continues with the center’s CASE Manager encouraging the contractors at events, visiting agency customers and promoting the GSA Schedules Program by helping coordinate the partnering. The new 84 Branch Chief is knowledgeable, innovative, tireless and has been heavily involved in advocating for the security industry for adding new technology, meeting with industry associations, understanding the complexity and challenges of Homeland Security Presidential Directive 12 (HSPD12) and advocating for the purchasing Physical Access Control Systems (PACS) utilizing the appropriate standards and the GSA Program among other innovations. As far as the supplier panel, we gave our GSA Schedule 84 team and leaders high praise for 2018.   GSA also added new categories or SINs for clearly identifying Physical Access Control Products that appear on GSA’s Approved Product List Changes In The GSA Program Some changes this year in certain GSA programmes included the creation of a new category of products/services Special Item Number (SIN) for Order Level Materials (OLM) developed to assist with solution procurements. This new SIN was added to Schedules 03FAC, 56, 70, 71, 00Corp, 738X and 84. Under Schedule 84 it is SIN 84-500. GSA Schedule 84 consolidated many Special Items Numbers (SINs) to make finding products and services less complex Essentially this SIN allows agencies procuring under the aforementioned GSA Schedules’ programmes to purchase and the contractor to add items and services not known prior to the task as a Contract Line Item Number (CLIN) not to exceed 33% of the order. For more information and FAQs on OLMs go to www.gsa.gov/olm. This is not to take the place of “Open Market” items for adding products only that are not listed on a company’s GSA Contract. Physical Access Control Products Previously, GSA Schedule 84 consolidated many Special Items Numbers (SINs) to make finding products and services less complex for the agencies. GSA also added new categories or SINs for clearly identifying Physical Access Control Products that appear on GSA’s Approved Product List according to the standards created under FIPS201. These products appear under SIN 246 35-7 after being tested and approved by GSA. To be qualified to install these products under the GSA Program at least one individual from the GSA Contractor company must complete the class and be CSEIP certified before applying for labor SIN 246 60-5. Additionally, the company must demonstrate certain qualifications and have past performance for this type of work. The Security Technology Alliance offers the training class and certification. Certified individuals and approved products are listed at www.idmanagement.gov. Companies listed with SIN 246-35 7 and SIN 246-60 5 may be found by searching at www.gsaelibrary.gsa.gov. Updates To Guidance For Procurement Updates to guidance for procurement of PACS will continue to be posted to the GSA PACS Ordering Guide Updates to guidance for procurement of PACS will continue to be posted to the GSA PACS Ordering Guide. The ordering guide posted at www.gsa.gov/firesecurity is a valuable support tool created to assist agencies with understanding the requirements of FIPS201 and procuring a PACS. The guide includes relevant regulations, FAQs, sample systems designs, sample statements of work, a list of key points of contract for additional help and questions. In partnership with GSA and guided by the GSA Ombudsman group, the Security Industry Association and the Security Technology Alliance members and their contractor companies participated in a GSA Reverse Industry PACS Training Day on September 17, 2018. We presented from an industry perspective important fact on PACS system requirements, procurement planning, providing information on resources and further educating with panel discussions, individual presentations and amusing skits to over 300 Government agency staff and acquisition specialists. You can find some of the unedited recording of the PACS Reverse Industry Day Training on YouTube. Some changes included the creation of a new category of products/services Special Item Number (SIN) for Order Level Materials (OLM) GSA Schedules Program A hot topic about the GSA program for 2018 was also an issue for the prior year. The GSA Schedules Program is a streamlined contracting vehicle incorporating specific Federal Acquisition Regulations for more efficiently purchasing commercial items. Companies may apply per a continuous open season for a 5-year contract with three 5-year options to renew. Contractors are vetted for past performance, corporate experience and financial capability. Products and services are considered for offering to Federal, State and Local customers (for Schedule 84) with pricing that is determined to be fair and reasonable through negotiations with GSA. To make the determination for fair and reasonable pricing GSA carefully reviews the commercial practices of the contractor To make the determination for fair and reasonable pricing GSA carefully reviews the commercial practices of the contractor as well as the competition of identical or similar item pricing. The most vocal complaint of concern from the contractors was regarding the consideration of competitor contractors offering identical items with out-of-date pricing or holding a Letter of Supply not authorized by the manufacturer. GSA Pricing Tool Since the GSA utilizes a pricing tool to determine if the pricing offered is competitive, a rogue competitor can cause a pricing action to possibly be rejected due to out of date information even as the manufacturer offers an update of the product. This is an issue on all GSA Contracts that the supplier panel hopes will be reconsidered by GSA policymakers at the central office. Most of us believe the Letters of Supply should only be issued by the manufacturer or with documented specific permission of the manufacturer to a reseller. Manufacturers may want to have a better understanding of the Letter of Supply, how it is considered by GSA and more carefully choose their Government partners for experience and compliance. Another challenge for the security community is regarding the lack of accessibility of participating dealers to GSA eBuy Overcoming Challenges For The Security Community Contractors may only see RFQs which are posted under the Special items Number(s) that were awarded to their GSA Contract Another challenge for the security community is regarding the lack of accessibility of participating dealers to GSA eBuy. GSA eBuy is an online Request for Quotation (RFQ) program that is for GSA Contract holders only. Agencies will post their requirements by Special Item Number for at a minimum 48 hours. Contractors may only see RFQs which are posted under the Special items Number(s) that were awarded to their GSA Contract. GSA Participating Dealers may take orders on behalf of a manufacturer if they are authorized under the manufacturer’s GSA Contract. They may also have an online PO Portal to receive orders. But they have no access to GSA eBuy to response to RFQs. Usually, under these arrangements, the manufacturers do not respond directly, so there is a problem using GSA eBuy for opportunities as their GSA Participating Dealers have no access to respond. GSA Schedule 84 Leadership In some instances, a contracting officer may allow an emailed quotation. However, with the use of the electronic ordering system, this has become a common problem we hope to bring to the attention of policymakers. Some changes to the programmes may make the presentation of documentation more effective going forward The GSA Schedule 84 leadership has been helpful to explain the challenges to the agencies to try and resolve such issues. So, what’s up for 2019? GSA modernization is coming. There will be improvements to their tools and more consolidations of SINs and more. There have been discussions of a revival of the GSA Expo. The Expo offered training for contracting staff both Government and private industry. Valuable Tools For Vendor Training Equally important is the networking, meetings and the exhibits of the contractors. Expos have been discontinued since 2012 but smaller events have been growing as well as online webinar training. Webinars are valuable tools for GSA and vendor training, but they do not take the place of being able to meet your customers face-to-face. GSA online eOffer and eMod program have made processing actions more efficient. Some changes to the programmes may make the presentation of documentation more effective going forward. The GSA online website for viewing the items on the GSA Contract and for purchasing items, GSA Advantage could definitely use an update as it has been basically the same for 20 years. Keep an eye on GSA Interact for the latest happenings with GSA.

Further Acquisitions In The Pipeline For Parent Company ACRE
Further Acquisitions In The Pipeline For Parent Company ACRE

One of the biggest recent security divestitures in the news was the sale of Mercury Security to HID Global, which occurred around a year ago. The seller in that transaction was ACRE (Access Control Related Enterprises), also the parent company of Vanderbilt and ComNet. We recently spoke to founder and CEO Joe Grillo, a 30-year industry veteran, about the mergers and acquisitions (M&A) market, ACRE’s future, and new opportunities opened up by the Mercury sale. Q: What’s new with ACRE? Grillo: We have an opportunity to have organic growth and to have some scale on a global basis to be a decent size player" ACRE is a company I founded in 2012, and since then we have had six acquisitions and one divestiture. We’ll never focus on ACRE as a brand, but we currently have more visibility of ACRE as a parent company with our two strong brands, ComNet and Vanderbilt. Last year was a very busy year [with the sale of Mercury Security to HID Global] because it takes as long to sell a brand as to buy one, maybe more so. Q: What’s next? Grillo: What you are seeing from us this year is that we are again in a buying mode. No announcement yet, but we expect one by the end of the year. We are well-funded, have great partners, and see an opportunity to continue to grow acquisitively as our highly fragmented space of access control continues to consolidate. From the standpoint of ACRE, with the ComNet and Vanderbilt brands, we are also doing more integration on the backside – not what the customer sees. We will continue to grow toward a $200 million business. We were there when we owned Mercury, and we will get there again. We have an opportunity to have organic growth and to have some scale on a global basis to be a decent size player. Because ACRE are owned by a private equity company, we are brought into every opportunity: ComNet is a good example" Q: Do you see the M&A market being more competitive – more companies looking to acquire? Grillo: There’s a lot of money chasing not-so-many deals, so evaluations can get expanded. But as interest rates creep up, it is definitely a challenge to find the right valuation, the right financing and the right strategic fit. It is a very strategic market. Q: There have been some big acquisitions lately. Were you guys involved at all in evaluating those opportunities? Grillo: Because we are owned by a private equity company, we are brought into every opportunity. An example of that was ComNet. I would not have been aware that the founder passed away two years ago and that there was this opportunity to own the business. So we look at everything; anything that’s out there we look at. The biggest recent announcement in our world was S2 (being sold to UTC/Lenel), and, yeah, we looked at that. It didn’t fit our profile – it was too expensive. Great business, and it’ll be interesting to see how it fits into the UTC environment. There was also Isonas [which was recently sold to Allegion], but the size didn’t add enough scale, but I like the technology. ComNet sells communication networking solutions and products, which is more attractive than video systems for ACRE Q: So what are you looking for in an acquisition? Grillo: It’s hard for us to find something that moves the needle, and you have to find that right balance. Is it something we can digest and have the financing for, and also is there room on the back end? We are private equity-owned, so we know there will be an exit for our investors, too. So we have to find the right balance, good valuations, the right size and digestible. If you look at our acquisitions, we have done two “carve outs.” The Vanderbilt name didn’t exist until we bought the business from Ingersoll Rand, and then we bought the [intruder] business from Siemens. That’s how Vanderbilt came about. You get a lot of value when you carve out a business, but there’s a lot of work. In the case of Mercury or Access Control Technology (ACT) that we acquired; they were growing and profitable but they stretch your finances a lot more. So you have to find the right mix in there. Q: Does video interest ACRE at all? Grillo: We have to find the right balance, good valuations, the right size and digestible"ComNet is our video play. ComNet sells communication networking solutions and products, and 70 to 80 percent of that is used for video systems. But unlike cameras, which don’t interest us, it’s actually good margins, highly specialized repeat business and with good channel partners. So where are we going to play? Cameras – no (because of commoditization). We have some recorder technology (from the Siemens acquisition) and we have the communication networking technology (with ComNet). On the software side, we have looked at a lot of the VMS companies, and a lot of them have been on the market. But the valuation expectations can be high because they are software companies. And we really believe in partnering as a good thing, too. If we integrate to Milestone or Salient or some of these companies, we will never lose an access control client because they chose a particular VMS. Q: ACRE is also looking to grow organically, isn’t it? Grillo: From a technology perspective, we are a product company and we are continuing to bring new products to the market with the ComNet communication networking business and the access control business. And in Europe, we have a third leg of the stool, which is the very successful intrusion and burgular alarm business we acquired from Siemens (SPC products now sold under the Vanderbilt brand). That business continues to do well and is now one of the highest performing segments in our portfolio.The intrusion and burgular alarm continues to do well and is now one of the highest performing segments in our portfolio" Q: But you don’t have to own a company to make it part of your solution. Grillo: An important word is integration. We have to integrate to all the wireless locks. We have to integrate to the VMS systems. But we don’t have to own them. Q: How has the Mercury Security divestiture impacted the rest of your business? Grillo: It has opened up the opportunity for us to look at Mercury partners as possible acquisition targets without worrying about conflicts with the very good business of Mercury. We have more flexibility now compared to the Mercury era. Q: How will the economic cycle impact the security market? Grillo: Interest rates are a much bigger issue than the overall economic cycle. We talk a lot about it with our owners – clearly interest rates are tightening up. If you go out to do acquisitions or to borrow money to do something with your business, it will be tougher than it was two years ago, and it may get worse in the next two years. Security is less impacted by the economic cycle than some industries.