Vanderbilt Mechanical / Digital Door Locks

A defibrillator can save the life of a person suffering from cardiac arrest – but it is most effective when used in the first few minutes of the patient collapsing. Studies have shown that a shock given within the first three minutes provides the best chance of survival and even one minute of further delay can substantially lower the chances of recovering. Public Access Defibrillators (PADs) were created to allow untrained members of the public to deliver life-saving treatment in those precious minutes before an ambulance arrives. There are currently over 10,000 in the UK, located in parks, offices, high streets and sporting venues, and they are especially popular in rural communities, where ambulance response times are longer. Every second counts Over the years there has been a long-running debate as to whether PADs should be kept openly accessible or locked. Leaving them open could lead to theft, vandalism or misuse. Leaving them locked could mean that precious moments are lost waiting for a local guardian to arrive – and could even cost a life. To save as many lives as possible, it’s clear that PADs need to be available 24/7, fully operational and easily accessible to users and local guardians. But there is a solution that can meet all these conditions – a lock that can protect against vandalism while providing convenient instant access when required. Life-saving solutions Over the years there has been a long-running debate as to whether PADs should be kept openly accessible or lockedDigital locks are ideal for securing PADs because they don’t require a key, and anyone can be given access over the phone. In the case of a cardiac arrest, the user calls 999 and the ambulance controller provides them with a simple, easy-to-remember code. The ambulance controller can then advise them, step by step, what to do. Local guardians, who have responsibility for the PAD, can be provided with an override key to enable them to monitor and maintain the defibrillator. The PAD cabinets built by Duchy Defibrillators show exactly how this works in practice. Based in rural Cornwall, Duchy Defibrillators manufactures, supplies and installs monitored PAD cabinets. To provide public access to the defibrillators, it needed a lock that could keep its cabinets secure, make them easily accessible and withstand the stormy Cornish weather. Codelocks recommended a digital electronic lock that could operate on a standalone battery, making it especially suitable for remote areas. As well as offering flexible access, digital locks come with a range of varying options and functions to suit different applications. As Duchy Defibrillator cabinets are installed in a wide variety of locations and sometimes need to withstand outdoor exposure, it opted for a robust electronic digital lock that is both affordable and easy to set up. A digital-access revolution Using smart locks in combination with a dedicated app or portal allows operators to send time-sensitive codes to end-users The example of Duchy Defibrillators shows how digital locks can be used to keep defibrillator cabinets secure while affording instant access to users when they are needed. But the flexibility of digital locks also makes them suitable for securing property and equipment in a wide variety of situations, especially for shared and public facilities. This is why you’ll increasingly see digital locks used to secure restricted areas in hospitals, schools and offices, as well as shared facilities like hotel and gym lockers, public restrooms and more. Digital locks are available for a number of specific applications, including doors, lockers and cabinets. They can range from simple mechanical locks through to more sophisticated electronic locks and state-of-the-art smart locks. Using smart locks in combination with a dedicated app or portal allows operators to send time-sensitive codes to end users – making them very popular for contactless entry and with facilities managers that need to manage access to buildings and campuses. One thing is certain – whatever your access control requirements are, there’s a keyless lock solution to suit. The digital access revolution is here.

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for mail and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing while obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc while sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for maneuver. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

The safeguarding of premises through the monitoring of entrance and exit points has traditionally been a very manual aspect of security. Human operators have been relied on to make decisions about who to admit and deny based on levels of authorization and the appropriate credentials. The access control business, like many industries before it, is undergoing its own digital transformation But the access control business, like many industries before it, is undergoing its own digital transformation; one where the protection of premises, assets and people is increasingly delivered by interconnected systems utilising IoT devices and cloud infrastructure to offer greater levels of security and protection. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. These systems, connected through the cloud, can be customized and scaled to meet the precise requirements of today’s customer. And it’s the ease of cloud integration, combined with open technologies and platforms that is encouraging increasing collaboration and exciting developments while rendering legacy systems largely unfit for purpose. Remote management and advanced diagnostics Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution.Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution. For example, as the world faces an unprecedented challenge and the COVID-19 pandemic continues to cause disruption, the ability to monitor and manage access to sites remotely is a welcome advantage for security teams who might otherwise have to check premises in person and risk breaking social distancing regulations. The benefits of not physically having to be on site extend to the locations within which these technologies can be utilised. As an example, within a critical infrastructure energy project, access can be granted remotely for maintenance on hard to reach locations. Advanced diagnostics can also play a part in such a scenario. When access control is integrated with video surveillance and IP audio, real-time monitoring of access points can identify possible trespassers with automated audio messages used to deter illegal access and making any dangers clear. And with video surveillance in the mix, high quality footage can be provided to authorities with real-time evidence of a crime in progress. Comprehensive protection in retail The use of connected technologies for advanced protection extends to many forward-looking applications. Within the retail industry, autonomous, cashier-less stores are already growing in popularity. Customers are able to use mobile technology to self-scan their chosen products and make payments, all from using a dedicated app. From an access control and security perspective, connected doors can be controlled to protect staff and monitor shopper movement. Remote management includes tasks such as rolling out firmware updates or restarting door controllers, with push notifications sent immediately to security personnel in the event of a breach or a door left open. Remote monitoring access control in storage In the storage facility space, this too can now be entirely run through the cloud with remote monitoring of access control and surveillance providing a secure and streamlined service. There is much to gain from automating the customer journey, where storage lockers are selected online and, following payment, customers are granted access. Through an app the customer can share their access with others, check event logs, and activate notifications. With traditional padlocks the sharing of access is not as practical, and it’s not easy for managers to keep a record of storage locker access. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers. The elimination of manual tasks, in both scenarios, represents cost savings. When doors are connected to the cloud, their geographical location is rendered largely irrelevant. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers They become IoT devices which are fully integrated and remotely programmable from anywhere, at any time. This creates a powerful advantage for the managers of these environments, making it possible to report on the status of a whole chain of stores, or to monitor access to numerous storage facilities, using the intelligence that the technology provides from the data it collects. Open platforms powers continuous innovation All of these examples rely on open technology to make it possible, allowing developers and technology providers to avoid the pitfalls that come with the use of proprietary systems. The limitations of such systems have meant that the ideas, designs and concepts of the few have stifled the creativity and potential of the many, holding back innovation and letting the solutions become tired and their application predictable. Proprietary systems have meant that solution providers have been unable to meet their customers’ requirements until the latest upgrade becomes available or a new solution is rolled out. This use of open technology enables a system that allows for collaboration, the sharing of ideas and for the creation of partnerships to produce ground-breaking new applications of technology. Open systems demonstrate a confidence in a vendor’s own solutions and a willingness to share and encourage others to innovate and to facilitate joint learning. An example of the dynamic use of open technology is Axis’ physical access control hardware, which enables partners to develop their own cloud-based software for control and analysis of access points, all the while building and expanding on Axis’ technology platform. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification Opportunities for growth Open hardware, systems and platforms create opportunities for smaller and younger companies to participate and compete, giving them a good starting point, and some leverage within the industry when building and improving upon existing, proven technologies. This is important for the evolution and continual relevance of the physical security industry in a digitally enabled world. Through increased collaboration across technology platforms, and utilising the full range of possibilities afforded by the cloud environment, the manufacturers, vendors and installers of today’s IP enabled access control systems can continue to create smart solutions to meet the ever-changing demands and requirements of their customers across industry.

Doncaster Culture and Leisure Trust (DCLT), The Dome, required a new solution that would protect several areas, including one of the largest gym’s in Doncaster, The Fitness Village. Vanderbilt ACT365 system DCLT had a specific brief for this project that specified enhancing the staff and customer experience, while simultaneously providing access control solutions to restricted areas from the general public, members, and staff alike. Oliver Law Security (OLS) Ltd. did not hesitate to recommend the Vanderbilt ACT365 system. ACT365 is not only a fully cloud-based solution, but also offers a flexible solution for installation and management that OLS identified as a key ingredient to meet DCLT’s project brief. API Integration In addition to DCLT’s security requirement, OLS also realized ACT365 as an ideal solution for this task, given the product’s very focused API integration. Thanks to the ACT365 interface, OLS was able to integrate DCLT’s gym management system to enable single-source data to be used to populate the access control system, keep records up-to-date, and enhance customer experience. For instance, previously, the older system had taken up to 3-5 seconds to validate members and open the entry turnstiles. Once the API interface had been achieved, this validation is now done instantly through ACT365 and allows members with active memberships through the entry points without any minimal delay. Game-changer security solution According to Oliver Law Security, using ACT365 and its API interface is a game-changer for this type of project The scope of this project, although not significant in the number of doors, was a very technical project with integration into SQL server and a third-party membership system with the potential for thousands of would-be users. According to Oliver Law Security, using ACT365 and its API interface is a game-changer for this type of project. With multiple updates per day, the access control system is always fully populated with the correct, validated members ensuring DCLT’s premier venue, The Dome, is protected against memberships that have lapsed. Cloud-based off-premise solution The system is entirely cloud-based offers an off-premise solution with no additional new servers required or PC’s running software. Through the ACT365 app, DCLT’s site administrators can manage the system for staff. The beauty of the interface is once the schedule runs, all information is autonomously sent to the ACT365 database, meaning adding new memberships, updating memberships, or revoking access is seamless, not tying up staff verifying and administering the membership/access control systems respectively. Commenting on the project, Oliver (Ollie) Law, Managing Director of Oliver Law Security (OLS) Ltd., stated “We didn’t hesitate to recommend the Vanderbilt ACT365 system. As a Vanderbilt Gold Integration Partner, this is our go-to product, and for Doncaster Culture and Leisure Trust, the flexibility and scalability of the product was best placed to grow with their business.” He adds, “We are fully committed to working and growing with Vanderbilt, and we look forward to other projects of this nature in the future.”

The integration developed between Vanderbilt’s ACT Enterprise access control software platform and Hanwha Techwin’s Wisenet WAVE video management software (VMS), means operators are now able to instantly visually verify access control activity and events directly from ACT Enterprise. ACT Enterprise is a role-based software platform which streamlines the monitoring and management of ACTpro access control systems comprising web-enabled door controller interfaces and MiFare and/or DESfire card readers. The integration removes the need for control room operators to use two separate software platforms to visually verify access control events. Instead, operators are able to conveniently view live streams or recorded video associated with a door, directly in ACT Enterprise. Wisenet WAVE If, for example, a door has been forced open, an operator can simply right-click on the event listed in ACT Enterprise, to immediately replay the relevant recorded video made available by Wisenet WAVE. With an auto-discover feature which enables connected cameras and third-party IP network devices to be addressed and set up in just minutes, Wisenet WAVE makes it almost effortless to monitor high-definition video streams. Wisenet video surveillance and ACT Enterprise systems are increasingly being specified for the same projects" Key features include a virtual PTZ which, with just a click of the mouse, enables operators to zoom in to see close-up detail of any suspicious activity. The latest version of WAVE, 4.1, also features push notifications of user defined alarm events which can be sent to mobile devices. Support for Wisenet AI cameras allows the attributes of classified objects or people to be forensically searched by filtering recorded metadata. Technology partnership “Wisenet video surveillance and ACT Enterprise systems are increasingly being specified for the same projects. With this in mind, we have worked closely with the Vanderbilt team to ensure our respective solutions seamlessly interact,” said Uri Guterman, Head of Product & Marketing for Hanwha Techwin Europe. “This is an excellent example of two global market leaders cooperating to ensure our mutual customers are able to efficiently and conveniently obtain maximum value from their investment in a security solution.” Access control event Commenting on the success of the integration, Michael Moyna, Senior Product Manager at Vanderbilt, stated: “This integration makes for a more precise examination of the video system concerning the access control event. It also removes the operator's need to visit the control room to retrieve the footage, as it can be viewed directly within ACT Enterprise instead. This, of course, delivers an added layer of convenience to the system’s users.”

Vanderbilt, a provider of state-of-the-art security systems, announces the release of ACT Enterprise 2.14. ACT Enterprise is the company’s award-winning access control software that has a wealth of features and integrations. The latest additions in version 2.14 include extended integration with KONE and new video integration with Hanwha. The software has also added contact traceability reporting to its suite of tools. For instance, thanks to contact traceability reporting, users of ACT Enterprise can now successfully track potentially close contact cases within their building, including doors they may have interacted with. Tracking international travelers Commenting on the new feature, Alex Holmström, Global Sales Director at Vanderbilt, states: “This feature will help businesses create a safer and cleaner environment for their staff. System users can now remotely monitor their office from anywhere in the world, including tracking international travelers to their site.” ACT Enterprise 2.14 also sees additional benefits added to the software’s existing integration with KONE. By supporting KONE's latest API calls, it allows for a much faster install time compared with traditional hardwired input and outputs. Instead, ACT Enterprise and KONE software communicate at an API level. This optimizes the KONE system by having an efficient throughput within the building. Hardwired elevator control The big benefit, certainly for large buildings, is that it allows for a large increase in footfall" Michael Moyna, Senior Product Manager at Vanderbilt, explains in more detail: “The benefits of KONE integration are twofold. It makes the installation and integration of KONE and ACT much more straightforward because there is no cabling required as with traditional hardwired elevator control since the ACT software talks directly to the KONE server via the KONE API.” “The big benefit, certainly for large buildings, is that it allows for a large increase in footfall through the elevator system. This means you can prioritize elevators and make them work efficiently. For example, during morning rush hour, the elevator can be configured for optimal utilization to ensure effective throughput.” Lastly, a new release in this version is video integration with Hanwha’s Wisenet WAVE system and Dahua. These video additions complement an already rich set of integrations that include Milestones 3XLogic and Hikvision. Access control event ACT Enterprise users can play live video or recorded video associated with a door through these video integrations. Moyna expands on the value of this: “If an event happened last week where a door was forced open, the operator can right-click on the event in ACT Enterprise and simply replay the video recording from the Hanwha Wisenet WAVE system.” “This makes for a more precise examination of the video system concerning the access control event. It also removes the operator's need to visit the control room to retrieve the footage as it can be viewed directly within ACT Enterprise instead. This, of course, delivers an added layer of convenience to the system’s users,” he concludes.