Menvier Security Intruder Alarms: Communicators & Communication Systems(7)
The SD3, showcased at FIREX 2007, is the latest development in Menvier's world-beating speech dialler range. In addition to the standard PSTN connection, the SD3 also has an integral, full-function GSM module enabling it to use any of the standard mobile phone networks. The SD3 accepts all standard SIM cards (not supplied).The unit is user programmable allowing the user to digitally record a standard ‘home' message and up to eight individual trigger messages, enter up to ten contact phone numbers and select the type of message for each input. A user can select to send messages (either spoken or SMS text) via either connection or via both, if both, they can further pre-select which will dial first. Four programmable outputs are provided allowing designated users to dial into an SD3 at anytime and remotely switch up to four connected devices. These can also be controlled when a message has been received and the line is still open. The integral microphone allows any person called to listen-in to the premises and even talk back, if required.SD3 has an additional unique feature that opens up a whole new area of use for speech diallers. When an input is triggered, an automatic digital sound recorder can be programmed to record and store either the next 15 or 30 seconds of sound received from the integral microphone. This can be replayed either at the unit itself or, remotely, from anywhere in the world, via a fixed or mobile telephone.An integral, digital sensor can be preset at any given temperature from 0°C - 50°C and will automatically transmit a message when that temperature has been reached or exceeded. Ideal for ensuring that buildings or rooms never get to too cold if the heating system fails.The wide operating voltage range, 10.5VDC -28VDC, enables an SD3 to be used for monitoring virtually any kind of system, intruder, fire, access or Building Management System (BMS). Reducing the need for an installer to have to stock separate 12 and 24VDC versions.Cooper showcased the SD3 along with a wide range of their other products at FIREX 2007.Add to Compare
Browse Intruder Alarms: Communicators & Communication Systems
- Digital Communicators
- Voice Diallers
- Menvier Security
Intruder alarm communicator products updated recently
The safeguarding of premises through the monitoring of entrance and exit points has traditionally been a very manual aspect of security. Human operators have been relied on to make decisions about who to admit and deny based on levels of authorization and the appropriate credentials. The access control business, like many industries before it, is undergoing its own digital transformation But the access control business, like many industries before it, is undergoing its own digital transformation; one where the protection of premises, assets and people is increasingly delivered by interconnected systems utilising IoT devices and cloud infrastructure to offer greater levels of security and protection. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. These systems, connected through the cloud, can be customized and scaled to meet the precise requirements of today’s customer. And it’s the ease of cloud integration, combined with open technologies and platforms that is encouraging increasing collaboration and exciting developments while rendering legacy systems largely unfit for purpose. Remote management and advanced diagnostics Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution.Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution. For example, as the world faces an unprecedented challenge and the COVID-19 pandemic continues to cause disruption, the ability to monitor and manage access to sites remotely is a welcome advantage for security teams who might otherwise have to check premises in person and risk breaking social distancing regulations. The benefits of not physically having to be on site extend to the locations within which these technologies can be utilised. As an example, within a critical infrastructure energy project, access can be granted remotely for maintenance on hard to reach locations. Advanced diagnostics can also play a part in such a scenario. When access control is integrated with video surveillance and IP audio, real-time monitoring of access points can identify possible trespassers with automated audio messages used to deter illegal access and making any dangers clear. And with video surveillance in the mix, high quality footage can be provided to authorities with real-time evidence of a crime in progress. Comprehensive protection in retail The use of connected technologies for advanced protection extends to many forward-looking applications. Within the retail industry, autonomous, cashier-less stores are already growing in popularity. Customers are able to use mobile technology to self-scan their chosen products and make payments, all from using a dedicated app. From an access control and security perspective, connected doors can be controlled to protect staff and monitor shopper movement. Remote management includes tasks such as rolling out firmware updates or restarting door controllers, with push notifications sent immediately to security personnel in the event of a breach or a door left open. Remote monitoring access control in storage In the storage facility space, this too can now be entirely run through the cloud with remote monitoring of access control and surveillance providing a secure and streamlined service. There is much to gain from automating the customer journey, where storage lockers are selected online and, following payment, customers are granted access. Through an app the customer can share their access with others, check event logs, and activate notifications. With traditional padlocks the sharing of access is not as practical, and it’s not easy for managers to keep a record of storage locker access. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers. The elimination of manual tasks, in both scenarios, represents cost savings. When doors are connected to the cloud, their geographical location is rendered largely irrelevant. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers They become IoT devices which are fully integrated and remotely programmable from anywhere, at any time. This creates a powerful advantage for the managers of these environments, making it possible to report on the status of a whole chain of stores, or to monitor access to numerous storage facilities, using the intelligence that the technology provides from the data it collects. Open platforms powers continuous innovation All of these examples rely on open technology to make it possible, allowing developers and technology providers to avoid the pitfalls that come with the use of proprietary systems. The limitations of such systems have meant that the ideas, designs and concepts of the few have stifled the creativity and potential of the many, holding back innovation and letting the solutions become tired and their application predictable. Proprietary systems have meant that solution providers have been unable to meet their customers’ requirements until the latest upgrade becomes available or a new solution is rolled out. This use of open technology enables a system that allows for collaboration, the sharing of ideas and for the creation of partnerships to produce ground-breaking new applications of technology. Open systems demonstrate a confidence in a vendor’s own solutions and a willingness to share and encourage others to innovate and to facilitate joint learning. An example of the dynamic use of open technology is Axis’ physical access control hardware, which enables partners to develop their own cloud-based software for control and analysis of access points, all the while building and expanding on Axis’ technology platform. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification Opportunities for growth Open hardware, systems and platforms create opportunities for smaller and younger companies to participate and compete, giving them a good starting point, and some leverage within the industry when building and improving upon existing, proven technologies. This is important for the evolution and continual relevance of the physical security industry in a digitally enabled world. Through increased collaboration across technology platforms, and utilising the full range of possibilities afforded by the cloud environment, the manufacturers, vendors and installers of today’s IP enabled access control systems can continue to create smart solutions to meet the ever-changing demands and requirements of their customers across industry.
In 2017, IoT-based cyberattacks increased by 600%. As the industry moves towards the mass adoption of interconnected physical security devices, end users have found a plethora of advantages, broadening the scope of traditional video surveillance solutions beyond simple safety measures. Thanks in part to these recent advancements, our physical solutions are at a higher risk than ever before. With today’s ever evolving digital landscape and the increasing complexity of physical and cyber-attacks, it’s imperative to take specific precautions to combat these threats. Video surveillance systems Cybersecurity is not usually the first concern to come to mind When you think of a video surveillance system, cybersecurity is not usually the first concern to come to mind, since digital threats are usually thought of as separate from physical security. Unfortunately, these two are becoming increasingly intertwined as intruders continue to use inventive methods in order to access an organization's assets. Hacks and data breaches are among the top cyber concerns, but many overlook the fact that weak cybersecurity practices can lead to physical danger as well. Organizations that deploy video surveillance devices paired with advanced analytics programs often leave themselves vulnerable to a breach without even realizing it. While they may be intelligent, IoT devices are soft targets that cybercriminals and hackers can easily exploit, crippling a physical security system from the inside out. Physical security manufacturers Whether looking to simply gain access to internal data, or paralyze a system prior to a physical attack, allowing hackers easy access to surveillance systems can only end poorly. In order to stay competitive, manufacturers within the security industry are trading in their traditional analog technology and moving towards interconnected devices. Due to this, security can no longer be solely focused on the physical elements and end users have taken note. The first step towards more secured solutions starts with physical security manufacturers choosing to make cybersecurity a priority for all products, from endpoint to edge and beyond. Gone are the days of end users underestimating the importance of reliability within their solutions. Manufacturers that choose to invest time and research into the development of cyber-hardening will be ahead of the curve and an asset to all. Wireless communication systems Integrators also become complicit in any issues that may arise in the future Aside from simply making the commitment to improve cyber hygiene, there are solid steps that manufacturers can take. One simple action is incorporating tools and features into devices that allow end users to more easily configure their cyber protection settings. Similarly, working with a third party to perform penetration testing on products can help to ensure the backend security of IoT devices. This gives customers peace of mind and manufacturers a competitive edge. While deficient cybersecurity standards can reflect poorly on manufacturers by installing vulnerable devices on a network, integrators also become complicit in any issues that may arise in the future. Just last year, ADT was forced to settle a $16 million class action lawsuit when the company installed an unencrypted wireless communication system that rendered an organization open to hacks. Cybersecurity services In addition, we’ve all heard of the bans, taxes and tariffs the U.S. government has recently put on certain manufacturers, depending on their country of origin and cybersecurity practices. Lawsuits aside, employing proper cybersecurity standards can give integrators a competitive advantage. With the proliferation of hacks, malware, and ransomware, integrators that can ease their client's cyber-woes are already a step ahead. By choosing to work with cybersecurity-focused manufacturers who provide clients with vulnerability testing and educate end users on best practices, integrators can not only thrive but find new sources of RMR. Education, collaboration and participation are three pillars when tackling cybersecurity from all angles. For dealers and integrators who have yet to add cybersecurity services to their business portfolios, scouting out a strategic IT partner could be the answer. Unlocking countless opportunities Becoming educated on the topic of cybersecurity and its importance for an organization is the first step Physical security integrators who feel uncomfortable diving headfirst into the digital realm may find that strategically aligning themselves with an IT or cyber firm will unlock countless opportunities. By opening the door to a partnership with an IT-focused firm, integrators receive the benefit of cybersecurity insight on future projects and a new source of RMR through continued consulting with current customers. In exchange, the IT firm gains a new source of clients in an industry otherwise untapped. This is a win for all those involved. While manufacturers, dealers and integrators play a large part in the cybersecurity of physical systems, end users also play a crucial role. Becoming educated on the topic of cybersecurity and its importance for an organization is the first step. Commonplace cybersecurity standards Below is a list of commonplace cybersecurity standards that all organizations should work to implement for the protection of their own video surveillance solutions: Always keep camera firmware up to date for the latest cyber protections. Change default passwords, especially those of admins, to keep the system locked to outside users. Create different user groups with separate rights to ensure all users have only the permissions they need. Set an encryption key for surveillance recordings to safeguard footage against intruders and prevent hackers from accessing a system through a backdoor. Enable notifications, whether for error codes or storage failures, to keep up to date with all systems happenings. Create/configure an OpenVPN connection for secured remote access. Check the web server log on a regular basis to see who is accessing the system. Ensure that web crawling is forbidden to prevent images or data found on your device from being made searchable. Avoid exposing devices to the internet unless strictly necessary to reduce the risk of attacks.
Johnson Controls recently unveiled the findings of its 2018 Energy Efficiency Indicator (EEI) survey that examined the current and planned investments and key drivers to improve energy efficiency and building systems integration in facilities. Systems integration was identified as one of the top technologies expected to have the biggest impact on the implementation in smart buildings over the next five years, with respondents planning to invest in security, fire and life-safety integrations more so than any other systems integration in the next year. As advanced, connected technologies drive the evolution of smart buildings, security and safety technologies are at the center of more intelligent strategies as they attribute to overall building operations and efficiencies. SecurityInformed.com spoke with Johnson Controls, Building Solutions, North America, VP of Marketing, Hank Monaco, and Senior National Director of Municipal Infrastructure and Smart Cities, Lisa Brown, about the results of the study, smart technology investments and the benefits of a holistic building strategy that integrates security and fire and life-safety systems with core building systems. Q: What is the most striking result from the survey, and what does it mean in the context of a building’s safety and security systems? The results show an increased understanding about the value of integrating safety and security systems with other building systems Hank Monaco: Investment in building system integration increased 23 percent in 2019 compared to 2018, the largest increase of any measure in the survey. When respondents were asked more specifically what systems they we planning to invest in over the next year, fire and life safety integration (61%) and security system integration (58%) were the top two priorities for organizations. The results show an increased understanding about the value of integrating safety and security systems with other building systems to improve overall operations and bolster capabilities beyond the intended function of an individual system. Q: The survey covers integration of fire, life safety and security systems as part of "smart building" systems. How do smarter buildings increase the effectiveness of security and life safety systems? Hank Monaco: A true “smart building” integrates all building systems – security, fire and life-safety, HVAC, lighting etc. – to create a connected, digital infrastructure that enables individual technologies to be more intelligent and perform more advanced functions beyond what they can do on their own. For example, when sensors and video surveillance are integrated with lighting systems, if abnormal activity is detected on the building premise, key stakeholders can be automatically alerted to increase emergency response time. With integrated video surveillance, they also gain the ability to access surveillance footage remotely to assess the situation. When sensors and video surveillance are integrated with lighting systems abnormal activity on the premise can automatically be detected Q: How can integrated security and life safety systems contribute to greater energy efficiency in a smart building environment? Hank Monaco: Security, fire and life-safety systems can help to inform other building systems about how a facility is used, high-trafficked areas and the flow of occupants within a building. Integrated building solutions produce a myriad of data that can be leveraged to increase operational efficiencies. From an energy efficiency standpoint, actionable insights are particularly useful for areas that are not frequently occupied or off-peak hours as you wouldn’t want to heat or cool an entire building for just one person coming in on the weekend. When video surveillance is integrated with HVAC and lighting systems, it can monitor occupancy in a room or hallway. The video analytics can then control the dimming of lights and the temperature depending on occupant levels in a specific vicinity. Similarly, when access control systems are integrated with these same systems, once a card is presented to the reader, it can signal the lights or HVAC system to turn on. In this example, systems integration can ultimately help enable energy savings in the long run. Security and life safety systems contribute to help enable greater energy efficiency and energy savings in the long run Q: What other benefits of integration are there (beyond the core security and life safety functions)? Hank Monaco: Beyond increased security, fire and life-safety functions, the benefits of systems integration include: Increased data and analytics to garner a holistic, streamlined understanding of how systems function and how to improve productivity Ability to track usage to increase efficiency and reduce operational costs Enhanced occupant experience and comfort Increased productivity and workflow to support business objectives Smart-ready, connected environment that can support future technology advancements Q: What lesson or action point should a building owner/operator take from the survey? How can the owner of an existing building leverage the benefits of the smart building environment incrementally and absent a complete overhaul? Lisa Brown: Johnson Controls Energy Efficiency Indicator found that 77% of organizations plan to make investments in energy efficiency and smarter building technology this year. This percentage demonstrates an increased understanding of the benefits of smart buildings and highlights the proactive efforts building owners are taking to adopt advanced technologies. There is an increased understanding that buildings operate more effectively when different building systems are connected As smart buildings continue to evolve, more facilities are beginning to explore opportunities to advance their own spaces. A complete overhaul of legacy systems is not necessary as small investments today can help position a facility to more easily adopt technologies at scale in the future. As a first step, it’s important for building owners to conduct an assessment and establish a strategy that defines a comprehensive set of requirements and prioritizes use-cases and implementations. From there, incremental investments and updates can be made over a realistic timeline. Q: What is the ROI of smart buildings? Lisa Brown: As demonstrated by our survey, there is an increased understanding that buildings operate more effectively when different building systems are connected. The advanced analytics and more streamlined data that is gathered through systems integration can provide the building-performance metrics to help better understand the return on investment (ROI) of the building systems. This data is used to better understand the environment and make assessments and improvements overtime to increase efficiencies. Moreover, analytics and data provide valuable insights into where action is needed and what type of return can be expected from key investments.
It seems that only a few days pass between cyber security stories of concern to the public such as personal data leaks and DIY home camera hacks. With this in mind and the need for increased connectivity, the industry is in need for guidance in cyber security. 2020 is set to be a year of change for the physical security industry. Here are the top four predictions to stay head of market trends in the year ahead. 1. There will be more clarity for installers about industry-standard for cyber security The professional security industry will next year see the launch of a new set of cybersecurity guidelines Through the work being conducted by the BSIA Cyber Security Product Assurance Group (CySPAG), the professional security industry will next year see the launch of a new set of cybersecurity guidelines. This will provide the industry with the guidance and clarity that is currently missing. A key area of clarification is the chain of responsibility. It is not just the responsibility of the manufacturer to keep everything secure from a cyber-perspective. The whole supply chain is responsible - once a product leaves the lab where they’re manufactured, conditions change. Those who maintain, install and operate the product have a shared responsibility to ensure that a product or system remains cyber secure. As the sector develops and more cyber-enabled products become available to the market, this cyber security approach will become more important, and a key differentiator to the DIY market, which can only be a good thing. 2. Cloud and 4G connectivity are giving end-customers better physical security The percentage of panels connected to cloud services is now increasing every year Manufactures have been producing cloud-ready products for several years. Initially, not all installers had been taking advantage of benefits of cloud-connected panels, however the percentage of panels connected to cloud services is now increasing every year. Trust and education have improved, meaning that installers and end-users have realised that connectivity is positive, enabling consumers to check on their properties remotely and allow installer to remotely support their customers. However, one area of constraint has been the dependency on customers networks which may, or may not, offer the level of performance that a robust and resilient security system demands. With the introduction of mobile data connectivity to connected products over the past few years, and as connectivity becomes more widespread across physical security products there will also be a greater shift toward mobile technologies such as 4G, either as a back up to a router connection or for complete network independence. 3. Connectivity is changing the way installers work Installers are a vital part of the chain of when a new alarm system is fitted into a property Installers are a vital part of the chain of when a new alarm system is fitted into a property, providing both installation and maintenance services. Traditionally maintenance activities have always been delivered on-site. With the increased ease of connectivity for security systems and the advancements in how these systems are used, installers are provided further opportunity to enhance customer service around the delivery of maintenance. It is no longer a requirement to have a customer wait until an engineer can attend a property to remedy a fault, as many can now be addressed within minutes from any location in the world. This ability allows installation businesses to focus their engineers on more critical tasks while delivering an overall higher level of customer service. Indeed, some installation businesses are moving to a model of having dedicated remote support engineers in addition to the road-based team. 4. Manufacturers are ready for IP-only alarms, ahead of the 2025 analog switch off The PSTN switch off being conducted by BT and other service providers is due to be completed in 2025 The PSTN switch off being conducted by BT and other service providers is due to be completed in 2025 as part of the move to Next Generation Networks, ending the use of analog phone lines and moves communications technology into an all IP-only space. Although some service providers have indicated that there may be some type of initial PSTN simulation, those providers that are doing this are also making it clear that this is only a temporary solution. The switch off will be a huge change for the security industry. Where heritage, analog alarm systems are in use, installers will need to plan to reconfigure existing systems to use the temporary PSTN simulation functions (where available) or upgrade systems to an all IP solution. Although 2025 feels a long way off, installers and end-users need to start planning now and taking the necessary action. In our sector, manufacturers are ready for IP-only alarms through the provision of cloud-based solutions and the use of techniques such as SIA IP for ARC monitoring.
Kwikset brand of Spectrum Brands, Inc. – Hardware & Home Improvement Division, announces that its SmartCode 888 Deadbolt Lock was chosen to become part of the new Home is Connected smart home system from D.R. Horton, Inc. The inclusion of Kwikset’s SmartCode 888 in the system was based on its value (great functionality at an entry-level price), reliability, and high degree of security. Incorporating the latest Z-Wave 500 chipset, the SmartCode 888 offers keyless entry through a convenient, easy-to-use touchpad. Kwikset’s patented Home Connect technology enables the lock to wirelessly communicate with other devices in the home through a third-party smart home controller, as well as to remotely check the door lock status, lock or unlock the door and receive notifications. Innovative Program D.R. Horton’s Home Is Connected system is included in the base price of each new home from the company’s family of brands D.R. Horton’s 'Home Is Connected' system is included in the base price of each new home from the company’s family of brands. The system includes a robust central hub by Qolsys that controls the smart home features, including a home alarm and automation platform by Alarm.com, Honeywell Home thermostat from Resideo, smart switches by Eaton Corporation, video doorbell by SkyBell and hands-free, voice-first experiences with Amazon Alexa. “We are pleased to be part of such an innovative program created by the nation’s largest volume homebuilder,” said Dave Seeman, Director of National Builder Accounts, Kwikset and Baldwin, Spectrum Brands, Inc. – Hardware & Home Improvement Division. Convenience Of Keyless Entry “We are confident that buyers of D.R. Horton homes will not only appreciate the security and convenience of keyless entry that our SmartCode 888 provides, but also the endless benefits of whole home automation. To be a part of a system that includes such well-known, reputable brands indicates to us the high level of trust D.R. Horton puts in our products.” Brad Conlon, Vice President of National Accounts for D.R. Horton, said, “We are pleased to work with Kwikset to provide this essential component to D.R. Horton’s new Home is Connected smart home system. We know our customers will appreciate the peace of mind that comes from Kwikset’s SmartCode 888 lock and the Home is Connected system overall.”
Safe Cities will provide thought leadership sessions to provide more insight into this concept IFSEC International 2015 has released details for this year’s Safe Cities feature which will focus on the protection of larger urban areas, critical national infrastructure and business continuity at London’s ExCeL from 16-18 June. Suited for senior and strategic personnel responsible for the protection of major assets within a city, Safe Cities will provide high level thought leadership sessions to provide more insight into this fast growing concept. Networked technologies and current trends all feature heavily in the Safe Cities Seminar Theatre, exclusively sponsored by Eaton. Key Themes Surrounding Smart Technologies Key themes surrounding smart technologies include a presentation on 17th June based on Safe Smart & Connected Cities: Emerging Technologies delivered by Dr. Simon Moores a leading futurologist. This presentation will give an insight into protecting people and property. Leading the Safe Cities agenda, Earl of Erroll, Independent Crossbench Peer, House of Lords, Chairman will take to the stage with a keynote presentation focused on -Unlocking The Internet Of Things & Securing The Future. Reflecting that the Internet of Things is fast becoming a universally dominant topic, this session will cover the impact this ever increasing connectivity presents is a challenging security issue. Discussing ‘The UK’s Smart Cities Capabilities’, Dan Byles MP who is the Vice-Chair of the All Party Parliamentary Group whose presentation The UK’s Smart Cities Capabilities will promote how the UK is taking the lead in the global smart city environment. Urban Critical Infrastructure Protection Today’s discussions of the Smart City concept often overlook the importance of planning for and responding to natural or man-made emergencies. With his presentation “Smart, Secure and Resilient Cities – Critical Foundations”, Enzo Peduzzi, Director Industry Affairs at Siemens Building Technologies and Vice-President of Euralarm, will be focusing on this aspect. He will show that the systems need to function even and especially under stress in order to keep cities truly smart and explain why urban critical infrastructure protection plays a key role in keeping smart cities up and running at all times. Safe Cities visitors to IFSEC International can access the full Safe Cities seminar program and take advantage of the networking opportunities adjacent VIP Lounge, sponsored by Siemens. Visitors will have access to complimentary refreshments and the opportunity to speak to high level attendees. Safe Citites Provide Formidable Opportunities IFSEC International Event Director- Gerry Dunphy comments: “Safe Cities is a key element for visitors at the show this year at ExCeL. With the increase in smart technologies and the ‘open season’ aspects presented by the Internet Of Things, it’s a duty of IFSEC to provide a platform for these topics and discussions to be aired to a wider audience. Smart technologies are becoming a wider theme for the security market in general and Safe Cities is a formidable opportunity to visitors to take advantage of.”
Related white papers
Preparing Your Organization With Quality Situational Awareness
6 Questions To Ask When Choosing A Security SystemDownload
'Boosting On-Site Safety And SecurityDownload
Optimize Your Business with Analytics and AIDownload