Motion detection is a key feature of security systems in residential and commercial environments. Until recently, systems have relied heavily on closed circuit television (CCTV) and passive infrared (PIR) sensors, which both require significant investment and infrastructure to install and monitor.

Developments in wireless technology are increasing home security possibilities. Few years ago, these developments led Cognitive Systems to discover that the wireless signals surrounding oneself can be used to detect motion. Known in the wireless industry as WiFi sensing, this technology brings many benefits that other motion detection solutions have not been able to provide.

The working of WiFi sensing

At Cognitive Systems, the company has used WiFi sensing technology to develop a motion detection solution called WiFi Motion™, which measures and interprets disruptions in RF signals transmitted between WiFi devices. When movement occurs in a space, ripples in the wireless signals are created. WiFi Motion interprets these ripples and determines if an action, such as sending a notification, is needed.

Enabling this functionality in a space is incredibly simple. With a software upgrade to only one’s WiFi access point (or mesh router), motion sensing capabilities are layered into one’s WiFi network. Existing connected WiFi devices then become motion detectors without detracting from their original functions or slowing down the network.

Using artificial intelligence (AI), WiFi Motion establishes a benchmark of the motionless environment and learns movement patterns over time, which could be used to predict trends. This allows unusual movement patterns to be detected with greater accuracy while decreasing the potential for costly false alerts.

Wifi motion illustration
WiFi Motion requires no line-of-sight or installation

WiFi sensing and other home monitoring solutions

All of these capabilities are made possible by WiFi sensing and together create a motion detection system that provides unparalleled accuracy, coverage, privacy and affordability compared to other solutions on the market. PIR integration is far more complex and imposes electronic and physical design restrictions compared to WiFi sensing.

In terms of placement, PIR systems are difficult to install, requiring line-of-sight and a device in every room for localization. WiFi Motion requires no line-of-sight or installation and is also a scalable solution compared to PIR.

Much like cameras, PIRs can only cover so much space, but WiFi Motion can cover the entire home and even detect motion in the dark and through walls, without adding additional devices to the home. WiFi Motion detects less distinguishing context than cameras and microphones, but more context than regular PIR sensors for the perfect balance of privacy and highly accurate motion detection.

Privacy solution

While cameras have been the security solution for years, WiFi Motion offers a more affordable solution that can rival the privacy and coverage capabilities of even the most high-end cameras.

With such a wide coverage area, one might think that WiFi sensing infringes on privacy, but actually, the opposite is true. With WiFi Motion, the contextual information collected cannot be used to identify a specific individual, unlike cameras which can clearly identify a person’s face or microphones, which can identify a person’s voice.

It is different from other smart home security options that use cameras and microphones because it only senses motion using WiFi signals - it doesn’t “see” or “listen” like a camera or microphone would. This provides opportunities for added security in spaces where privacy might be a concern and installing a camera may not be a comfortable solution, such as bathrooms and bedrooms. The data collected is also anonymized and highly encrypted according to stringent industry privacy standards.

WiFi Motion Learns Movement patterns
Existing connected WiFi devices then become motion detectors

Additional WiFi sensing applications

Since WiFi sensing technology requires no additional hardware or subscription fees, it is much more affordable than other motion detection solutions. It can be used as a standalone solution, or it can be easily layered into more complex systems. This ease of integration, scalability and relatively low cost brings a lot of potential for various applications.

Motion detection can trigger other smart devices in the network to turn lights on or off

In eldercare, for example, WiFi sensing can be used to help seniors live comfortably in their homes for as long as possible. With the increasing aging population and high costs associated with care homes, the market for this application is considerable. Caregivers can use an app to monitor movement in their loved one’s home and be alerted about unusual movement patterns that could indicate a concern.

For smart homes and other environments that have a network of smart devices, the artificial intelligence (AI) component of the technology allows for improvements to automated features. Motion detection can trigger other smart devices in the network to turn lights on or off or make adjustments to the temperature in a room.

Security for the commercial sector

For office buildings and other commercial properties, it is easy to see how all of these features could be scaled up to offer a highly accurate and cost-effective motion sensing and smart device automation solution.

Cognitive Systems is closely involved with the development of WiFi sensing technology, working with various industry groups to establish standards and help it reach its full potential. WiFi Motion is merely the tip of the iceberg in terms of motion sensing possibilities, but its applications in the world of security are undeniably compelling. It is an exciting time for the wireless industry, as one works with stakeholders in the security space to explore everything this technology can do.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

Author profile

In case you missed it

HID Global Pilot Program Demonstrates Social Distancing and Contact Tracing
HID Global Pilot Program Demonstrates Social Distancing and Contact Tracing

If one employee stands less than six feet away from another employee, a fob attached to a lanyard around his or her neck emits an auditory beep – an immediate reminder to observe social distancing. If an employee were to be diagnosed with COVID-19, a cloud-based database provides a record of who at the company the sick employee had contact with. These capabilities of HID Location Services ensure social distancing and provide contact tracing to enable companies to return to work safely. They have been deployed in a pilot program at HID Global’s Corporate Headquarters in Austin, Texas. Social distancing using a BLE beacon To ensure social distancing, a Bluetooth Low Energy (BLE) beacon is emitted from an employee’s fob (or from a badge that has the same functionality). The beacon communicates peer-to-peer with a beacon emitted by another employee’s fob or badge to alert if the location of the two employees is less than six feet apart. To ensure social distancing, a Bluetooth Low Energy (BLE) beacon is emitted from an employee’s fob For contact tracing, the beacons communicate via a nearby “reader” (a BluFi BLE-to-Wi-Fi gateway) to the Bluzone cloud-based software-as-a-service. The building area covered by each reader constitutes a “zone,” and the system records when two beacons are signaling from the same zone, which indicates contact between employees. In effect, the system records – historically and forensically – who was near whom (and for how long) using the zone-based approach. “In the workplace, we provide organizations with visibility into the location of their workforce,” says Mark Robinton, Vice President, IoT Services Business Unit at HID Global. Pilot program spans variety of environments By documenting where a sick individual moved in the building, the system also can guide any need to close off a certain area for deep cleaning. Instead of quarantining a whole building, a company could quarantine a small subset of employees who were likely exposed. Importantly, the system only reports data, while management makes the actual decisions about how to respond. The site of the pilot program is the 250,000-square-foot HID Global facility in Austin, which includes a variety of environments, including manufacturing areas, an executive suite, cubicles, a training area, a cafeteria, and lobbies. This spectrum of use cases enables the pilot program to evaluate how the system works in various scenarios. The building in Austin has two floors, plenty of natural lighting and emphasises sustainability in its design. HID Location Services ensure social distancing and provide contact tracing Pilot starts small and expands For the pilot program, 80 readers were installed in a wide area in the facility, including a variety of environments. Initially 30 badges and 30 fobs, all BLE-enabled, were issued to employees. If a badge identifies another nearby beacon (suggesting a social distancing failure), it emits a blinking LED light, which can be seen by the offending co-worker. The fobs emit an audible beep, which employees have overwhelmingly said they prefer. Observers overseeing the pilot program have documented employee reaction and comments. It emits a blinking LED light, which can be seen by the offending co-worker There were challenges in setting up the pilot program remotely to ensure fewer employees were on site during the pandemic. The equipment was provisioned in Florida and then shipped to the Austin location. Fine-tuning was required to adjust the signal strength of the BLE beacons. The badges were initially more powerful, but the strength was dialed back to be comparable to the fobs and within the six-foot social distancing range. Signal strength is also a variable in diverse environments – the 2.4 Ghz signal tends to reflect easily off metal, so adjustments in signal strength are needed in a factory setting, for example, versus a collection of cubicles.   “This facility is large enough and diverse enough that it provides great test results and quality data to analyze,” says Dean Young, Physical Security Manager at HID Global. “Our employees are eager to be part of the pilot to demonstrate that we use the technologies we provide to our customers, and they want to help us stay in compliance with social distancing and contact tracing.” Ensuring privacy while protecting employees HID Global’s headquarters had approximately 425 employees before the coronavirus pandemic lowered the number drastically to include only essential workers. As more people return to work, additional fobs and badges are being issued to expand the scope of the pilot program. The program is also incorporating contact tracing of suppliers and others who visit the facility. Except when triggered by contact among employees, locations are not recorded. Each employee’s location is always available in real-time (e.g. in case of an emergency), but they are not “tracked.” Through BluFi placement and geofence capabilities, the system closes off private areas where location should not be monitored, such as a rest room. Geofencing also identifies when employees enter and/or exit the area covered by the pilot program. Although each beacon is associated with an employee, the employee’s identity is not part of the data stored in the cloud, so there are no privacy concerns. Data is completely anonymized, and no personally identifiable information (PII) is stored in Bluzone. Other computer systems in a company, such as a human resources (HR) program, can privately and securely store the identities associated with each beacon.   Other applications for HID location services In addition to social distancing and contact tracing applications, HID Location Services offer other use cases ranging from asset tracking and employee safety/security to location analytics. For example, the system can analyze room usage for better building management and operational efficiency. It can also quickly find people in emergency situations. These use cases ensure continued value for a system even after concerns about social distancing and contact tracing have faded. The system can analyze room usage for better building management and operational efficiency Another big selling point is the ability of a company to be better prepared in case of a future pandemic, or a second wave of this one, says Robinton. The HID Location Services social distancing and contact tracing applications will be available at the end of Q3 and will be rolled out through HID Global’s existing integrator channel. Vertical markets likely to embrace the technology include healthcare, where hospitals need to track patients as they come in and to know which other patients or staff they may have been exposed to. The financial sector is another likely market, as is manufacturing, which is looking to avoid the prospect of shutting down an entire plant. It’s better to address the three or four people who were near a sick employee than to shut down the plant. In the hospitality industry, fobs can be used to signal duress by the housekeeping staff.

Debunking The Myths Of EBT Cameras In A COVID-19 World
Debunking The Myths Of EBT Cameras In A COVID-19 World

The new buzz in the thermal imaging world goes by many names. In a short time, a small niche in the world of IR, which was previously sidelined to make way for more lucrative markets such as security and defence, has taken the top spot in the attention, production and sales for many manufacturers and integrators.  It’s no surprise considering the size of this new market. Suddenly, hotels, cinemas, malls, hospitals, critical services, public transportation, office buildings and more have become consumers of thermal imaging cameras. Along with that, the more traditional markets, such as security, defense and industry are suffering from budget cuts, project cancellations, or postponements. Combine two of these elements, and the new elevated body temperature (EBT) camera market is easily 3-4 times the size of the other markets combined. Thermal imaging cameras and common misconceptions Can thermal cameras detect viruses?  The answer is NO. The best the camera can do is tell you if someone has a higher skin temperature than others. There are many reasons for an elevated body temperature which are not all health-related, such as exercise or even sitting in a warm environment without air-conditioning. Are the cameras accurate? The accuracy debate is a significant and controversial discussion with much misinformation running around. When discussing accuracy, there are two considerations: The first consideration is the accuracy of the camera itself versus a blackbody. Blackbodies are devices which can regulate temperature very accurately (although not all are equal) and have a high emissivity level, which means they are almost not affected by surrounding heat or energy. All thermal cameras are calibrated against blackbodies. Still, some manufacturers have been using them in their EBT solutions to give the camera a consistent temperature reference to which it can adjust. The accuracy of the camera in this discussion talks about the camera itself. How sensitive the detector is, internal reflections, lens aperture, noise level and the calibration process itself. Also, if you read the fine print, most manufacturers quote accuracy levels which are valid only in a controlled or laboratory environment. As in, a room with a steady 25°C and a slow shift in temperature (not more than 1°C per hour). Most field conditions don’t allow this – so this low level of accuracy is challenging to replicate in practice.Blackbodies are devices which can regulate temperature very accurately The other focuses on the fact we are not looking for COVID in black bodies. We are looking for it in humans. And, the substance known as human skin acts very differently. To date, there are no medical models which can predict how skin will behave in different scenarios. We don’t know what the external skin temperature of a man weighing X who was exposed for X minutes to direct or indirect sunlight would be. So, while the black body may be spot on – it has no bearing on the temperature reading of humans.  So, while we can improve the first issue, the second one is more complicated. One way to circumvent it is by using population statistical analysis and looking for the gradient between the healthy population (which does have existing medical models) to the people with a higher temperature which are statistical anomalies for such a camera. Thermal cameras and their suitability  Are all thermal cameras suitable for temperature readings? There is a difference between a thermal camera and a thermometric camera. A thermal camera developed for security and defence are used to detect threats and give situational awareness. We don’t care that two trees with different temperatures will have different colors – we care about the person standing between them. We manipulate the image, so the viewer has a better understanding of what he sees. With thermometric measurement (as in – thermal temperature reading) we do the exact opposite. We want accurate temperatures readings for each pixel in our screen. A thermometric camera will go through a rigorous calibration together with the lens, which often takes longer. We need to offset, in the calibration tables, minute pixel-sized blemishes in the detector and lens. Those blemishes would be invisible in a thermal image – but can skew the temperature reading and produce inaccurate results. We regularly see suppliers who are using regular thermal cameras with blackbodies to auto adjust the temperature reading as described above. But, if you take that same blackbody and move it a meter to one side, you may discover the camera suddenly registers a different temperature – as not all pixels have a uniform calibration. Does it matter where we scan in humans? Yes and no. The inner canthus of the eye (the tear duct) is the most relevant external point with the best correlation to internal temperature. People looking at the inner canthus will manage to avoid a lot of the effects of ambient temperature on the skin. The tradeoff is that the inner canthus is a tiny area, and people would need to remove their glasses. Most of the world’s health organisations consider the difference between a healthy and sick individual to be 1.5° C (or 2.7° F). That change is consistent whether you’re looking at the tear duct, the forehead or a mouth. Thus, the solutions that look at the gradient temperature (population-based solutions) are just as effective when measuring the ambient temperature on the skin of the population tested.  Do people need to stop in front of the camera? Not necessarily. It depends on the speed of the camera and the temperature detection algorithm. Some cameras can detect people walking very quickly as they only need a few frames to detect the temperature. Will the camera work outdoors? Most outdoor cameras will suffer from false alarms and misses. Some cameras have very advanced compensation algorithms for this, but they can’t take into account all the dynamic temperature changes, humidity, sporadic energy readings and the “bane of thermal imaging” - turbulence. Therefore, the conditions can strain even the most advanced algorithm.  Why invest in this technology? The WHO states, that while asymptomatic transmission exists, it’s much less contagious then symptomatic transmission. Some doctors claim that a person with a fever sheds the virus five times more aggressively than a person with no fever.  There are clear regulations for businesses to screen individuals for fever In some countries, there are clear regulations for businesses to screen individuals for fever as they come into the establishment. While you can have a person in the entrance with a contactless thermometer, they must stop people for a 5-second check each time they come in. That would cause long lines in many places with high traffic. And, during testing, standing less than 2 meters from the individual would throw social distancing out the window. If the tester got sick, the next day they would start endangering everyone else they checked. It’s better to screen automatically and only use the IR thermometer in cases where an alert was triggered and needed to be verified. Various forms of technology  We’ve also seen much use of the IR tablets recently. While they are low cost, a person usually needs to stand very close (less than 1 meter) from the monitor to be caught by the camera. Thus, spreading his germs on the glass or plastic cover of the tablet while being screened.  In conclusion – Thermal EBT cameras are important. They aren’t a miracle cure, and they won’t stop the spread of the virus. And one should be careful of false promises. But along with other solutions (most importantly – masks), they can help protect us during these times and allow the wounded global economy to rejuvenate itself.

Beyond Video Analytics, What Are the Benefits of AI and Machine Learning?
Beyond Video Analytics, What Are the Benefits of AI and Machine Learning?

Artificial intelligence (AI) and machine learning have made a big splash in the physical security market, transforming video analytics to a new level of accuracy. In fact, the terms have become common buzzwords throughout the industry. However, the potential for AI and machine learning to impact the physical security industry goes far beyond their ability to improve video analytics. We asked this week’s Expert Panel Roundtable: Beyond better video analytics, how can artificial intelligence (AI) and/or machine learning benefit the physical security market?