A person infected with the Coronavirus (COVID-19) infects an average of 2.5 other people within five days. You do not need to be a mathematician to realize that early detection of infected people is key to successful pandemic containment.

The aim of effective containment strategies is therefore not so much to reduce the number of absolute cases as it is to extend the time frame within which they occur.

Without effective containment measures, the virus spreads rapidly and is beyond the capacity of the health care system. However, if infection rates can be minimized through early detection and rapid, targeted identification of further infections, cases will continue to occur over a longer period of time and remain within the capacity of the health care system.

Identifying, testing and results

For example, the goal of many countries is to carry out as many Corona tests as possible to quickly identify infected people. It is then necessary to identify and reach potentially-infected people and isolate them in quarantine. This is a tried and tested procedure. But this method also costs valuable time in the fight against the virus and has many unknowns. The determination of a concrete test result alone sometimes takes up to 48 hours due to limited laboratory capacity. Added to this is the imprecise and slow procedure for determining contact persons. Or do you still remember exactly who and where you shook hands with in the last ten days - and could you provide information on this?

Security technology to the rescue

When it comes to the time factor, security technology can be a great help. Thermal imaging cameras and temperature sensors, for example, can help to detect a person with elevated body temperatures. Fever can also be one of the symptoms in those infected with the Coronavirus. At neuralgic points such as airports and train stations, or at entrances to hospitals, thermal imaging cameras can quickly reveal which people have fever. Presumably infected people can be easily separated and asked about other symptoms. Physical security technology can make a great contribution here.

Dr. Frank Gillert, a professor at the University of Applied Sciences in Wildau, Germany states, however, as one of the leading scientists for logistics-centric security research, he demands "rapid innovation in dealing with situations like COVID-19 should be a priority". He sees enormous potential in the possibilities of IT and artificial intelligence; "We should use the disruptive changes that are currently taking place and that are challenging global orders to strengthen the significance in IT infrastructure development and also in security technology development.“

The goal in a global crisis

And he is right: In global crises such as the Corona pandemic, security-related deficits become apparent and space is created for technical innovations. The goal of governments and companies is to restore security and save human lives as quickly as possible.

The German data analytics powerhouse G2K, for example, has developed a Corona Detection & Containment System (CDCS) that is ready for immediate use in record time. Detection takes place in combination with AI-supported data analysis to specifically identify virus hotspots and distribution routes, as well as to identify other potentially infected persons.

When developing the system, the focus was on two questions: How do I detect a suspected infected person in crowded environments and even more importantly, how do I quickly and comprehensively determine the person's contacts and previous whereabouts, and find correlations and patterns in this information? The data experts of the Berlin-based company found the answer in the combination of physical security technology and their existing data analytics platform.

The G2K system

The system is based on G2K's scalable IoT platform "Situational Awareness Builder" (SAB), which is already in use in several projects worldwide and sets standards in process automation and process optimization, including security management.

As soon as a person with fever is detected by the system, he or she can be immediately screened to avoid contact with other people and thus prevent possible new infections, i.e. to interrupt the chain of infection.

For this purpose, stationary thermal imaging cameras or smartphones equipped with a temperature sensor accessory can be used. The potentially infected person must now be registered and referred to a doctor or hospital for further specific diagnostic measures. The entire process is covered by a mobile G2K application.

A combination of security and medicine

The platform can bring together available hospital capacity, infection reports, movement and contact profiles and provide an excellent picture of the source of infection. Thus, medically necessary isolations can be implemented quickly.

At the same time, infected patients can use the app to document their recovery and become actively involved. All this data is centrally managed and analysed, using deep learning methods. This provides crisis managers with a single monitoring, control and resource management tool that enables immediate action to be taken to combat the spread of the virus and gives officials full transparency on the status of the pandemic.

Karsten Neugebauer, founder and CEO of the company behind the solution, explains his commitment as follows "A few weeks ago we too were faced with increasing difficulties due to the Corona crisis. As we have a strong presence in Europe in particular, we had to struggle with postponed project starts and limited resources". But instead of burying their heads in the sand, G2K's dedicated team decided to declare war on the virus."

"In our entrepreneurial duty, we, therefore, decided to use our available technology and equip it to fight COVID-19. Our team has been working day and night over the last few weeks to expand our software platform to enable us to contain the pandemic quickly and effectively. Politicians must now immediately push ahead with the unbureaucratic implementation of prevention and control measures such as our CDCS to ensure the stability of our public systems," demands Karsten Neugebauer.

The pandemic continues

As the COVID-19 pandemic spreads from continent to continent, researchers around the world are working to develop antidotes to the virus. As long as this has not been found, the spread of the virus must be slowed down internationally. Only by this can system-relevant infrastructure be held consistently.

Combining modern physical security technology with platform technology and artificial intelligence provides an excellent possibility to slow down the current and for sure, future pandemics.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

Author profile

Elias Heinel Director Brand Strategy & Management, G2K Group

In case you missed it

Sanitization, Safety And Getting Back To Business
Sanitization, Safety And Getting Back To Business

You are not alone: operators everywhere are asking themselves what are they going to do? How are they going to get back to business, and fast? How are they going to cost-effectively operate with all the new safety requirements that have arisen as a result of COVID? How are they going to ensure it all gets done for the safety of customers and staff? How are they going to protect their brand from the negative exposure of being identified as a property with a reputation for COVID? The economic impact of COVID is expected to hit brick and mortar businesses the worst, as their businesses are dependent on people being physically present. According to a recent report by RBC, it is estimated that 70% of Americans expect to avoid public spaces, 57% of Canadians will be unwilling to attend conferences without a vaccine and 63% of people will prefer to drive vs fly.  This means, that for those of you in the business of travel, conferences, co-working spaces, retail stores, museums, art galleries, restaurants, sports arenas, hotels, cruises, airlines, resorts, theme parks, long-term care, education, etc. in the blink of an eye your approach to on-site safety just changed. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitisation To get back to business and operating at full capacity after COVID, operations must find a way to eliminate the fear, uncertainty and doubt in the minds of their customers and employees. The affect of COVID-19 on safety and security To safely get back to business, the Centers of Disease Control and Prevention (CDC) emphasis that all operations need a pandemic response planJust like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budget. To ensure your property is safe and secure, it is no longer just about access control, video surveillance and intruder alarms; it is also about sanitization, the lines between the security and maintenance just blurred. From customers, to employees, to government regulators, to management, the focus is now on operations and the sanitization policies, procedures and actions of the team. To put this change of priority into perspective, six months ago, sanitisation was not top of mind for people. Why, because it was not a life or death issue, we had other first world problems to garner our attention. From an operations perspective if we enabled a sanitization issue to become significant enough to impact the safety of customers and staff and therefore the brand, then that was an operational choice versus a mistake. Standards for sanitisation  Just like cybersecurity has had a direct impact on the IT strategy and budget, COVID will have a direct hit on the operations strategy and budgetThe issue is, today while the operating priority of sanitization has significantly increased, it is not measured and managed to the same standard as the other safety and security concerns across a business. Also, important to consider, while people may not hold an operation liable during this first wave, we can guarantee they are not going to be as understanding during the second wave or a future pandemic. To safely get back to business, the Centers of Disease Control and Prevention (CDC) and the Occupational Health and Safety regulators emphasis that all operations need a pandemic response plan and should follow these simple guidelines: Develop your plan Implement your plan Maintain and revise your plan While this sounds simple enough, keep in mind that requirements are constantly evolving and will continue to do so for the foreseeable future, or at least until all the research is in. To create an emergency response plan for a pandemic, properties must first determine what needs to be sanitized. The current requirements dictate that most surfaces and objects will just need a normal routine cleaning, it is only the frequently touched surfaces and objects like light switches and COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-havedoorknobs that will need to be cleaned and then disinfected to further reduce the risk of germs on surfaces and objects. The challenge is when you step back and consider what people touch in a day; the list quickly grows. After only 30 minutes, I easily came up with a list of over 60 items that one could call ‘high touch’! If you think about it, the list is extensive; telephones, doorknobs, drawer handles, counters, pens, keypads, computers, etc. and the list is only going to get longer as the research comes in.   The challenge is when you step back and consider what people touch in a day; the list quickly grows Operating efficiency  If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper and filing cabinetsTo scope the impact on operations as part of the plan, we must then find and identify all of those high touch things across the property. If we then combine that with the fact that CDC requires that all high touch locations must not only be cleaned more often, but that they also require that each location is first cleaned with soap and water, and then disinfected for one minute before finally being wiped down. This means a one-minute task just turned into a 4-minute task, that must now be completed multiple times a day. From a resourcing perspective this adds up quickly, and operating efficiency must be a priority. Not to mention it is going to get very complicated to measure and manage especially. Post COVID rules Getting back to business is going to be complicated; lots to do, lots of moving parts and no technology to help. The fundamental challenge to keep in mind is not that the sanitization requirements have evolved, the real issue is that for most businesses this area has been left unchanged for generations. Still today most rely on checklists, logbooks and inspections to manage the responsibilities of our front-line workers, which might have been fine before COVID. Post-COVID the rules have changed and so should the approach to managing physical operating compliance on the front lines. COVID like most physical operating requirements is tactical, detailed and specific; broad strokes, the honor system and inspections are not going to cut it. The digital transformation  COVID has changed the game and made the digital transformation of operating procedures not a ‘nice-to-have’ but a must-have. If we don’t change our ways, not only will we be doomed to continue making the same mistakes, but we will continue to be lost in paper, filing cabinets filled with checklists, never to be seen again. Only with the right data can we significantly improve the operational decisions necessary to accelerate our return to full operating capacity. At the end of the day, to fully recover, operations must eliminate the fear, uncertainty and doubt in the minds of customers and employees, only then can we really get back to business.

Which Security Technology Is Most Misunderstood, And Why?
Which Security Technology Is Most Misunderstood, And Why?

The general public gets much of its understanding of security industry technology from watching movies and TV. However, there is a gap between reality and the fantasy world. Understanding of security technologies may also be shaped by news coverage, including expression of extreme or even exaggerated concerns about privacy. The first step in addressing any challenge is greater awareness, so we asked this week’s Expert Panel Roundtable: Which security industry technology is most misunderstood by the general public and why?

Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?
Lessons Learned With Vanderbilt: How Have You Adapted To The COVID-19 Pandemic?

With the postponement of tradeshows and events due to the effects of COVID-19, Vanderbilt and ComNet have taken their high quality, innovative solutions online, directly to their customer base. Through an Online Events and Training resource, you can stay connected with the brands’ top resources and products, as well as join upcoming product webinars hosted by their in-house experts. With a majority of the world currently working from home, businesses must respond to this changing landscape. As such, Vanderbilt and ComNet have turned to online resources to share new product demonstrations and other company news. One cornerstone of the ACRE brands approach was the launch of their Online Events and Training resource page. Ross Wilks, Head of Marketing Communications at Vanderbilt, credits this online resource as the anchor to their communicative success with customers at present. “Through weekly webinars delivered by our in-house experts, Vanderbilt and ComNet have embraced more virtual opportunities to continuously communicate to our customers regarding our latest and most relevant products,” he says. “To date, our webinars have covered a wide range of industry topics such as Why Physical Security and Cloud go together, and The most recent developments in card cloning and reader hacking. Attendance to these online events has proved popular and effective in keeping communication with our customer base open and engaging.” Each webinar ends with a Q&A section, as well as follow-up articles on the most asked questions, plus recordings of the webinars being made available to attendees. As such, the webinar approach has proven a receptive approach for Vanderbilt and ComNet. The Online Events and Training resource acts as a one-stop-shop for all virtual information. Overall, the page outlines the brands’ value-added resources for customers, including the ability to request a remote product demonstration, the availability of free online training, 24/7 access to the Vanderbilt webshop, plus the aforementioned weekly webinars. Vanderbilt and ComNet’s business mantra is built on a foundation of customer-focused core values such as empowerment, collaboration, and high performance and Wilks credits this mentality with their ability to keep information flowing to their base during the present pandemic. “The ACRE brands moved early to kick-start online webinars and ramp up awareness of their already existing online training and shopping options. Now more than ever, it is important to keep customers up to date on the latest offerings,” Wilks explains. “Our commitment has always been to make their customer’s security journey the best possible experience, and that is what this Online Events and Learning page primarily focuses on,” he concludes.