The threat of drones is a growing concern around the perimeter and in the airspace surrounding airports.

According to a UK Airprox Board report, the number of times a drone endangered the safety of an aircraft in the UK airspace rose more than a third in 2018 compared to the year before. The highest-profile recent drone incident was at UK’s Gatwick Airport, where a drone sighting last December triggered a three-day shutdown of the UK’s second busiest airport, disrupted the travel plans of 140,000 people and affected 1,000 flights.

Unauthorized drone activity

And there have been other recent incidents of drone disruptions at airports:

  • At Heathrow Airport in January 2019, flights were temporarily stopped for about an hour ‘as a precautionary measure’ after a drone was reported. The UK Airprox Board recorded 39 dangerously close drone encounters at Heathrow in 2018.
  • In the U.S., flights into Newark Liberty International Airport were disrupted for about 90 minutes in January after a drone sighting.
  • Dubai International Airport, the world’s busiest for international travel, closed its airspace for about 30 minutes in February due to suspected unauthorized drone activity.
  • In March and again in May, air traffic at Frankfurt Airport in Germany was grounded due to drone sightings – for about 30 minutes in the first instance and about an hour in the second.

Drone detection systems

Security has a role in preventing drone incidents, although pilots often report themSecurity has a role in preventing drone incidents, although pilots often report them. At Gatwick, the initial reports of a drone over the airfield came from airport security officers. After the incident, the UK government rushed through legislation to enlarge the drone exclusion zones around airports to a maximum of 5 km (up from the previous 1 km).

In the U.S., the exclusion zone around airports is a radius of about 5 miles, and even more in sensitive areas such as the National Capital Region around Ronald Reagan Washington National Airport, where restrictions are 15 to 30 miles. Airports in the U.S. are allowed to deploy drone detection systems but may not use counterdrone technology (such as shooting down the drones), which is reserved for the Justice Department and Homeland Security.

Dedicated new technology

News that drone threats to aircraft are increasing should come as no surprise,” says Simon Barnes, Business Development Manager – Airports Europe for Genetec. “Recent reported incidents are just the tip of the iceberg. As drones become increasingly ubiquitous – both from hobbyists and their growing use in professional arenas – we can expect to see many more incidents.”

From speaking to airports across the world, Barnes has learned that two of the most pressing challenges they face are how they secure their perimeters (as intruders become increasingly sophisticated) and identifying ‘Friend from Foe’ as operational needs must be maintained. “When it specifically comes to drone detection, the short-term temptation can be to introduce a dedicated new technology to address this specific threat,” he commented.

More comprehensive response

We need to work with technology, not against it, in order to ensure public safety and security"However, the last thing a functioning airport needs is an independent system that isn’t unified with all of the other security measures in place. Only when the data from all of these inputs is visualized in one place can an airport begin to make sense of its environment and enable a fast and efficient response to evolving challenges such as the insider threat and malicious drone activities. We fully expect airports to respond to this changing landscape, to help ensure a more comprehensive response.”

Philip Avery, Managing Director of Navtech Radar, adds: “In today's current climate of increased national threats, we need to work fast to keep up with modern risks. However, creating new, complicated laws open to misinterpretation or enforcing a complete ban on privately owned drones seem like Luddite solutions that undermine the potential of innovative technology. We need to work with technology, not against it, in order to ensure public safety and security.”

Help mitigate risk

Navtech Radar sells the AdvanceGuard system for drone detection. Tavcom Training, part of the Linx International Group, has responded to requests from the security industry for expert training in order to be better prepared for and mitigate against the threat of Unmanned Aerial Systems (better known as drones). The company offers a two-day Drone Detection classroom-based course for £375+VAT.

Our drone detection course gives security professionals advice from experts"

The responses to the [recent] airport drone attacks were played out in the spotlight, with much public debate regarding the seeming lack of a pre-defined plan of action to prevent or contain such an incident,” explains Sarah Hayward-Turton, Sales and Marketing Director at the Linx International Group.

Our drone detection course gives security professionals advice from experts in drone technology, to help mitigate risk and implement countermeasures to thwart unauthorized drone activity.” The course will be offered again in November 2019 and in February 2020.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

Author profile

Larry Anderson Editor, SecurityInformed.com & SourceSecurity.com

An experienced journalist and long-time presence in the US security industry, Larry is SecurityInformed.com's eyes and ears in the fast-changing security marketplace, attending industry and corporate events, interviewing security leaders and contributing original editorial content to the site. He leads SecurityInformed's team of dedicated editorial and content professionals, guiding the "editorial roadmap" to ensure the site provides the most relevant content for security professionals.

In case you missed it

Facial Recognition: Contactless Solutions For A Safe, Post-pandemic World
Facial Recognition: Contactless Solutions For A Safe, Post-pandemic World

Facial recognition technology has come a long way since it first came to market several years ago. Initially plagued with technical challenges and widely viewed as a futuristic solution, facial recognition is now firmly implanted in numerous consumer and business products and applications. New advancement in software, specifically in the areas of algorithms, neural networks and deep learning and/or artificial intelligence (AI), have all dramatically improved both the performance and accuracy of facial recognition, further expanding its use for an increasing number of applications. From a purely business perspective, facial recognition’s powerful identification and authentication capabilities make it ideal for two primary applications: first as a security tool, and second as a workforce management solution. The touchless, accurate credential solution Facial recognition readers meet the new emerging need to limit physical exposure to germs and viruses Even before the COVID-19 pandemic, the touchless nature of facial recognition as an access credential was gaining traction with physical and cyber security professionals. By using an individual’s face as an access control credential, facial recognition eliminates the need and expense of physical cards and proximity devices, or the need to physically enter PIN codes. In addition, facial recognition readers meet the new emerging need to limit physical exposure to germs and viruses by offering a highly accurate touchless access control credentialing solution. As a workforce management tool, facial recognition helps preserve the health of employees checking into work, while providing management with an infallible means of documenting employee time and attendance while providing a detailed history of overall workforce activity and individual personnel tracking. Both of which have been longstanding challenges due to easily compromised time tracking systems and practices. Now, nothing is left to question based on hard data. With the growing popularity of facial recognition technology, there are many choices already available with more undoubtedly on the way. Selecting the right solution for your specific access control and/or workforce management application is dependent on a very wide range of variables. But there are a few core characteristics that you should look for when evaluating facial recognition readers. Wide and near-angle LEDs Most facial recognition terminals employ some form of IR (Infrared) technology to help ensure high visibility by the unit’s image sensor. This often limits where the unit can be installed such as outdoors or near windows due to strong ambient light. More advanced facial recognition readers employ as many as 80 wide-angle near infrared LEDs and 60 narrow-angle near infrared LEDs, allowing the unit to recognize faces even in full daylight and brightly lit environments (not direct sun). This enables installation at indoor locations near windows, lobbies and building entries. 3D pixel intensity distribution analysis Another facial recognition reader advancement to look for involves three-dimensional pixel intensity analysis. Ambient lighting contains ultraviolet rays which can negate near infrared LED lighting, and can also cast shadows making it difficult for a facial recognition reader to pinpoint the facial recognition points required for identification and authentication. Three-dimensional pixel intensity distribution analysis minimizes the effects of ambient light when acquiring facial images by minimizing lighting contrasts. As a result, it is easier for the algorithm to recognize the shape of the face, enabling it to extract more facial features and create higher quality face templates, which are critical for accurate facial recognition. Functional ergonomics This results in a faster, more comfortable, and convenient user experience The angle and position of a facial recognition reader directly impact the performance of the unit. Facial recognition readers with different viewing angles for built-in visual and infrared cameras allows users to stand at positions that are most suitable for facial recognition with little or no effort of contortions. This results in a faster, more comfortable, and convenient user experience. High performance processing Like any intelligent edge device, the performance of a facial recognition solution is directly reliant on its processing power. New advanced facial recognition readers deliver exceptional performance by employing enhanced face template extraction technology combined with powerful processor. For example, a facial recognition reader with a 1.4 GHz quad-core processor can perform up to 3,000 facial database matches (1:N) within one second. More advanced solutions also feature Group Matching functionality capable of executing up to 30,000 matches within one second. Live face detection It is most important that the facial recognition readers you evaluate are capable of analyzing faces in real time to maintain fluid entry/egress even during high volumes of employee traffic. Hardware-dependent live face detection systems employing technologies such as facial thermogram recognition and facial vein recognition require expensive hardware components, provide less accurate matches and slower authentication performance, which is counterintuitive for mainstream access control and workforce management applications. Dual authentication for added security Although the use of an advanced facial recognition reader provides the convenience, health benefits and cost-savings of touchless identification and authentication, there are many applications where more than one credential may be necessary to ensure the highest levels of security. Advanced facial recognition readers with multimodal, multifactor credentialing capabilities provide this added security benefit. For example, facial recognition readers that support multiple RFID proximity devices supporting 125 kHz and 13.56 MHz provide varying degrees of protection and greater implementation versatility. Videophone or intercom capabilities Facial recognition readers with multifunctionality can solve several challenges with one solution Facial recognition readers with multifunctionality can solve several challenges with one solution. A perfect example includes devices with SIP (session initiation protocol) videophone capabilities which effectively eliminate the need and associated expense of  installing separate intercom devices while adding another layer of security to one’s facility. The COVID-19 pandemic, and hopefully soon to follow post-pandemic world, have surely accelerated the need for highly accurate, cost-efficient, and reliable facial recognition technologies to help get people back to work safely. Selecting the right facial recognition solution for your specific access control and/or workforce management is now more important than ever before, making a little extra due diligence during the evaluation process a smart decision.

Thermal Cameras and Smart Cities: Preventing COVID-19 in Public Places
Thermal Cameras and Smart Cities: Preventing COVID-19 in Public Places

With the pandemic still in full swing and no certainty as to when exactly it will come to an end, the world has been battling anxiety for months now. And with each day, circumstances change quickly and almost make it impossible to predict what will happen next, how events will unfold, and what actions to take in light of a new situation. But one thing is certain: the world has been shut down and paralyzed for way too long, and the eventual reopening is unavoidable – in fact, it’s well under way. In this situation, what is possible to control is how the world will continue reopening – and specifically, how to ensure the safest possible reopening that will ensure the return of some degree of normalcy to people’s lives and business operations, while also managing the risk of COVID’s spread in the most efficient way. Our highly digitised, technologically advanced world This is when the power of technology comes to rescue the day: what truly sets the global crisis we face today apart from other calamities that humanity has encountered over year is the fact that it has developed in a highly digitised, technologically advanced world where each day brings about innovations with a sole purpose to make daily life and operations easier and more streamlined. And among these, the star of the past decade has been artificial intelligence. The world has been shut down and paralyzed for way too long, and the eventual reopening is unavoidable – in fact, it’s well under way While AI has many avenues of introducing efficiency and fast problem-solving, there is one specific application that will further fuel the reopening of the world and successfully keep the spread of the virus abate. This “collaborative security” application includes a synthesis of smart video analytics, facial recognition, object identification/detection, and thermal cameras that can support the reopening of businesses globally when installed within those facilities frequented by customers. With such a level of sophistication that can ensure uninterrupted monitoring and analysis of large public spaces, these AI technologies can ideally operate best as cloud solutions to ensure a collaborative network with maximum scalability and widespread implementation. As these technologies increase in ubiquity and find their way into daily operations of businesses globally, the cost of the smart solutions will decrease proportionally to the growth of their reach. There are some highly specific ways to create this collaborative network of interconnected safety tools in the current climate. Here are some applications that have been successful to date and will increase in usability in the foreseeable future, creating “smart cities” working together towards a safer, more secure world. Maintaining social distancing practices The most important step everyone around the world has taken to contribute to the effort of slowing the spread of the virus has been social distancing. A six-foot-distance has become a new social norm that has quickly been adopted globally and become a habit to people who are naturally used to being close to others and socialising without giving distance a second thought. The star of the past decade has been artificial intelligence So, it is natural that such distancing measures take time to get accustomed to – and it is also natural that individuals may forget about them from time to time. To help maintain the six-foot distance between people at all times and give them slight nudges to keep the rule top of their minds, AI video technology can be trained to estimate the distance between individuals in public and commercial areas and identify the cases in which people get too close to each other. By notifying local merchants or authorities about such cases, the system can help ensure the safety of everyone in the area at all times while positively reinforcing the public to gradually get more accustomed to maintaining the distance and thus helping stop the spread of the virus. Detecting the virus through facial recognition Perhaps the straightforward application of such high-level technology is using video surveillance to identify persons of interest who have tested positive for the virus. Modern AI has the ability to identify facial features and characteristics with a unique level of granularity, making it possible to identify individuals whose records show they have antibodies from those who can be potential carriers of the virus. After the initial differentiation and identification, the system can then notify the employers and employees of the facility about the results of the conducted analysis and the pursuant results, allowing them to be more vigilant and take action where necessary to ensure a safe experience for everyone. PPE reinforcement Wearing a mask or some sort of face coverage in public spaces and especially within facilities (such as stores, for instance) has been - and will continue to be - a requirement for maintaining a safe and healthy environment for people to continue with their day-to-day lives and businesses to resume regular operations. To this extent, the object detection and identification abilities of smart cameras can further reinforce this requirement and ensure that the absence of protective equipment doesn’t go unnoticed.  Essentially, these cameras can easily identify if an individual has coverage at any given point of time or not, notifying the local authorities about any risks immediately and helping them maintain necessary safety measures without having to interrupt their workflow or worry about missing a visitor without a mask. Detecting high temperature One of the key (and the most widespread) symptoms of COVID-19 is a high fever - a certain indicator of whether an individual may have been infected with the virus or not. While identifying fever with a regular human eye is nearly impossible, AI can do so at a fraction of time by quickly scanning body temperatures of any incoming individuals and determine whether it’s above CDC’s recommended temperature of 100.4F in order to determine the risk factor and notify the local authorities to take action. Modern AI has the ability to identify facial features and characteristics with a unique level of granularity This technology is a good tactic to objectively assess potential risks that come with elevated temperatures - and sometimes, the people themselves might not realize they might (unconsciously) be carriers of the virus and thus endanger the safety of others in their vicinity. The technology is yet another step towards ensuring a safer reopening of the global economy and a more streamlined way of getting back on track while minimizing the risk of spreading the virus further. It’s not all about the theory  We have tested the described approaches in our own R&D campus in Europe. The latest release of the IREX cloud enables remote fever detection and monitoring of social isolation and mask policies with AI. We have integrated thermal cameras to detect people with elevated temperature and CCTV cameras for identification and notifying those who potentially ill. In case of any health threat, the venue manager gets an instant message with a picture and exact location. These preventive steps helped our employees return to the office months earlier than it's happening in other countries. Moreover, personnel coming back to the office by their own wish as now they feel a virus-free environment in the campus - even safer than in their own homes. Now we are launching a pilot project for a well-known pharmacy chain in Florida, USA. With the help of a Computer Vision platform, staff will be able to divide customer traffic into those with normal body temperature and those who come in with elevated temperatures, as well as effectively monitor social distance norms. The goal of our potential client is to maximize the safety of customers in the post-pandemic period. Also, IREX is already deployed across hundreds of locations in the UK and will add health monitoring capability soon.

Can CCTV Become A More Effective Tool?
Can CCTV Become A More Effective Tool?

We all know that having CCTV around your home can help to protect you and your family. Without CCTV, you could end up in danger and an intruder could get away with breaking into your house, hurting your loved ones and stealing your possessions. Similarly, without CCTV in the office, you’ll be leaving yourself open to all kinds of damage and could lose a lot of equipment in the process. In short, making sure you have CCTV is important for both home and business security. However, it can be improved to become a more effective system so that you’re better protected, and can even deter a potential intruder without having to panic. In our world of ever-changing technology, we’re able to upgrade and enhance our CCTV systems so they can become a monitored system. Remote CCTV monitoring is an ideal way to protect everyone and everything whether you’re at home or at a workplace. What is remote CCTV monitoring? For a long time, CCTV was one of the best ways to keep your home, the office and people safe. But people started to notice that it would only deter people so much of the time and often the cameras were ignored by intruders. They would just cover their faces and hope for the best as they steal from a home, office or any other premises. Remote CCTV monitoring is a system that can loop into your existing CCTV, or come preinstalled with a new system. This technology sends a feed to a control room full of trained operators that are on call 24/7. Within this control room, operators are able to respond to any sort of distress call or unauthorised movement on the property line.  How does it work? Remote CCTV monitoring works by attaching to a live feed of your CCTV system, existing or new, so that the signal and images can be passed to a team of operators. These operators are on hand 24/7 so that if there is a problem, you know that you're safe in the hands of a specialist team. The specialist team has been trained to mitigate the chances of somebody breaking into your home when the system is triggered; similarly they call the local authorities instantly so that the potential intruder has less time to flee the scene. This is especially important if an intruder is already inside your property because they have less time to steal your items and leave. Without CCTV in the office, you’ll be leaving yourself open to all kinds of damage and could lose a lot of equipment in the process One of the biggest questions that revolve around remote CCTV monitoring is the idea of operators watching the CCTV at all times. Luckily most remote CCTV monitoring systems will incorporate a motion detection system to accompany your CCTV. Motion detection offers the ability to alert a control room if there is an unauthorised entry to the property line. These motion detection systems are state-of-the-art and so, depending on the system that you choose, they can watch over your property from a number of angles. Once the motion detection system has been triggered and the alert has been sent to the control room, then and only then will the operators get involved. This means that until the motion detection system has been triggered, nobody will watch your live CCTV feed. After one of the systems has been triggered, one of the specialist operators will instantly jump into action. This means that they can take different measures to deter any potential intruder and make sure that they do everything in their power to stop any damage or theft from the premises. In addition to the motion detection system and CCTV, you are able to opt for a public address (PA) system too. This means that an operator is able to shout commands through the PA system and potentially scare away any intruder. The intruder will also be warned about the fact that local authorities have already been called to the location.  Remote monitoring versus traditional CCTV Motion detection offers the ability to alert a control room if there is an unauthorised entry to the property line Having a monitored CCTV system means that you're able to better protect yourself, your business, employees and even your loved ones. Whether you're at home or in the office, having someone looking over your shoulder protecting your every move is something that can be appreciated by everybody. The biggest problem with just having traditional CCTV, is that it is a reactive system. This means that rather than stopping crime, a CCTV system just records it. While the thought is that having a CCTV camera visible can deter some intruders, there's no real evidence to suggest that it stops anybody; anyone can simply cover their face and carry on breaking into your home, office or even your car. As mentioned, remote CCTV monitoring is going to tackle that problem and make sure that someone is on hand to protect you at all times.