PCSC Electronic Locks(3)
Browse Electronic Locks
- Solenoid Bolts
Electronic lock system products updated recently
There’s no question that the popularity of Do-It-Yourself (DIY) security and home automation products is on the rise. The reasons for the growth in DIY sales are numerous, including increased awareness of home automation products, fast set-up, limited (if any) installation costs, and interoperability with other smart security products. In fact, with the parallel rise of smart home hubs like Alexa and Google Home, many people are opting to attempt the set-up of smart home devices without any professional assistance. According to a 2018 Residential Security Market Report prepared by Parks Associates and Security Sales & Integration magazine, “More than 60% of installing dealers now report that DIY systems are biting into demand for their services.” But the rise in DIY is not entirely bad news for security and home automation installers and dealers. There are a number of ways to view this glass as half-full. Let’s look at a few of them. Increase In Revenue For Dealers With their lower cost and perceived ease of installation, DIY products have broken down barriers for additional purchaseThere are reasons for dealers and installers to be cheerful about the rise of DIY. For one thing, according to that same Residential Security Market Report from Parks Associates, residential security dealers are doing quite well. The report states, “In 2017, revenues were up an average 7.72% for security dealers.” What about installations? The report goes on to say, “For 2017, the average number of installs per dealer was 22 per month, compared to 17 per month in 2016.” So, revenues are up for security dealers, and at least part of the reason can be attributed to the fact that DIY products can raise overall awareness of and spur interest in other home automation and security products. With their lower cost and perceived ease of installation, DIY products have actually broken down barriers for the additional purchase, and installation, of complete, professionally installed systems. Wireless, Connected Smart Locks For example, the sale of wireless, connected smart locks (viewed by some consumers as DIY) can lead to opportunities for further home automation product sales and professional installations. Connected smart locks can actually act as an extension of a smart hub or controller. They can be used to wirelessly communicate with and control all the devices that make up a home automation system, including lighting, entertainment, thermostats, air, alarms, shades and more. With their lower cost and perceived ease of installation, DIY products have actually broken down barriers for new security installations And they can do all this from a prime, convenient location – the front door, as well as other points of entry like the side or back doors. Plus, smart lock conversion kits like Kwikset Convert let homeowners easily bring home automation capabilities to their door without altering the aesthetics of the entry. Connected smart locks can allow homeowners to set up their home with custom scenarios, right before they step inside. For example, residents can program their lock so that every time they unlock the door, a foyer light goes on, temperatures begin to rise to a set level – even connected coffee makers can begin to make a cup. Portfolio Of Home Automation Products One of the best ways to mitigate the ‘threat’ of DIY sales is for dealers and installers to become more versatileSmart locks are just one example of the potential of DIY products to spark a homeowner’s interest in a wide range of other home automation devices, many of which would benefit from professional installation. One of the best ways to mitigate the ‘threat’ of DIY sales is for dealers and installers to become more versatile and offer a complete portfolio of home automation products. The larger the home automation offering, the more devices there are to sell and install, the larger the installation required, the greater the need for professional installation. Many homeowners who feel like they have a certain level of handiness will start by trying to do it themselves with a DIY product. But things don’t always go as planned, especially if they are attempting to set up a robust home automation system. First off, just because a product is DIY doesn’t mean that the old products that are being replaced are going to easily make way for the new. A DIY thermostat or smart lock might require that the old equipment (and possibly wires) get tugged out of the wall. Messy holes might need to be filled. Advantages Of Professional Installation Even after the old system has been removed, homeowners planning on setting up a connected system may soon realize they don’t have the electrical skills or technological know-how to install and connect all devices, get a system programmed correctly, and get everything up and running smoothly. Professional installers have learned from experience; there’s very little that they haven’t seen before. With their years of experience, installers know the best way to automate a home and how to create a custom smart home experience Do-it-yourselfers might be able to solve problems by searching the internet and finding videos. But, then again, they might not. After going the DIY route once, many full-home automation system enthusiasts are beginning to realize that the best way to get things done right the first time is to leave the installation and set-up to a professional. Professional installers can and should bring an extra level of experience and guidance to the process. Their services should go beyond tech installation and also include interface design. With their years of experience, installers know the best way to automate a home – how to create a custom smart home experience that doesn’t make the user feel less than smart. Selling Additional Home Automation Products If a problem arises due to installation error, the DIYer does not have any recourse to correct these mistakesResidential security dealers who offer professional installation should be willing to embrace the DIYer who has attempted to do a self-install but has not been able to complete the process successfully. With an open mind to this scenario, they can save the day for the DIYer, as well as create an opportunity to sell additional home automation equipment that the DIYer may not have known to be available. The disparity between DIY and professional installation also brings to light the fact that there are no ‘satisfaction guarantees’ and no ‘installation/labor warranty’ available when a home automation system is installed by a DIYer. If a problem arises with either the equipment connectivity due to installation error, or if a piece of equipment is installed incorrectly, the DIYer does not have any recourse to correct these mistakes. This may not be as critical if a DIYer installs a minor piece of equipment, but with something as critical as securing and protecting their home with a home automation and security system, most people want full peace of mind that everything has been installed correctly. Reduces Connection Instability According to a 2017 study by the analyst firm, IHS Markit, “The quality of the equipment is usually higher in professionally installed systems, and professional configuration and setup greatly reduces the potential for connection instability…” This is an issue that DIYers may come to realize over time. On the other hand, one issue DIYers may recognize right away, especially if they are attempting to connect multiple devices, is that the connectivity may be inconsistent. Professionally installed devices operating on a wireless protocol might deliver better, consistent, longer-range connectivity IHS Markit explains that, “DIY systems rely on open protocols and Wi-Fi connectivity that can sometimes be unreliable, creating connection issues. Some of the sensors can become unrecognizable to the system, requiring intervention from the user. In contrast, professional wireless systems rely on UL- or EN-certified equipment to operate on the basis of proprietary frequency, enabling them to work with the control panel much more seamlessly.” In other words, professionally installed devices operating on a wireless protocol, even an open-source protocol like Z-Wave, might deliver better, consistent, longer-range connectivity, and fewer headaches. Not Everyone Is A DIY Customer There are customers who want someone to install the devices correctly and help them learn how to use and maintain themThere’s no doubt that there’s a segment of the security and home automation market that loves to spend their free time doing their own home improvement. They are watching videos, reading how-to books and manuals, and enjoying every minute. There’s also a segment of the market whose top goal is to save money up front. For these customers, there’s no getting around the joy of saving money with the lower cost of many DIY products. But there are also a great number of prospective customers out there for whom DIY is of absolutely no interest. These consumers do not want to be their own IT department. They want expert help: they want someone to install the devices correctly and help them learn how to use and maintain them. The IHS Markit study points out what many home automation dealers already know: that the elder and aging-in-place markets are an ideal destination for the security and convenience of home automation products. The study says, “Many senior citizens are not tech savvy enough to install a DIY system by themselves, so they tend to rely on professionally installed systems that are usually maintained by a family member.” Along with the senior citizens market, there are many other market segments out there that still desire worry-free professional installation. Installers should offer a range of products that includes some DIY products, and some leave-it-to-a-pro products Producing Complete And Custom Solutions Perhaps the best way for dealers and installers to stave off that feeling of doom that they might have about DIY is to tackle the problem head on and be creative. Offer a range of products that includes some DIY products, and some leave-it-to-a-pro products – consider the DIY product a great entry point for a more comprehensive system. Play up the peace of mind that comes with professional installations and support that pitch with flexible monitoring contracts and service plans. Share what you do and why; relay your passion for producing complete and custom solutions and communicate how you add value to any and every sale. No one, not even the most tech-savvy consumer, wants to install their own products if the end result is that the product doesn’t work the way it should. That’s where the pros can, should and will always come into play.
The extensive analysis and discussion preceding any decision to implement a new physical security solution – whether it’s hardware, software or a combination of both – often focuses on technology, ROI and effectiveness. When it comes to deciding what type of security entrances to install at your facility, you will almost certainly also consider the aesthetics of the product, along with throughput and, if you’re smart, you’ll also look into service concerns. Each of these factors has its important place within the evaluation process, and none should be overlooked as they all have a significant effect on how well your entrances will perform once they are installed. Culture Influences Door Solution Decisions How significant will the change from current entrances to security entrances be for employees? Still, one additional factor actually trumps everything: if you have not considered your organization’s culture in choosing a security entrance, you may be missing the most important piece of the puzzle. Culture is a part of every other decision factor when selecting an entry solution. Before you make a decision about what type of entrance to deploy, you need to consider and understand the values, environment and personality of your organization and personnel. For example, how significant will the change from current entrances to security entrances be for employees? If people are accustomed to simply walking through a standard swinging door with no access control, this will be a culture change. Beyond this, whether you are considering a type of turnstile, a security revolving door or possibly a mantrap portal, simply walking through it will be a significant change as well. Training Employees On Door Security You’ll want to know whether employees have ever used security entrances before. If these types of entrances are in place in another part of the facility, or in a facility they’ve worked in at an earlier time, the adjustment will not be as great as if they’ve never used them at all. Consider, too, how your personnel typically react to changes like this in the organization or at your facility. They may be quite adaptable, in which case there will be less work to do in advance to prepare them. However, the opposite may also be true, which will require you to take meaningful steps in order to achieve buy-in and train employees to properly use the new entrances. With the increased importance of workplace security, discussing new entrances with workforces will help maintain a safer environment Communicate Through The Decision-Making Process All of this will need to be communicated to your staff, of course. There are a number of ways to disseminate information without it appearing to come down as a dictate. Your personnel are a community, so news about changes should be shared rather than simply decreed. As part of this process, you’ll need to give some thought to the level of involvement you want for your staff in the decision-making process. Finally, do not overlook the special needs among your personnel population. You undoubtedly have older individuals on staff, as well as disabled persons and others who bring service animals to the office. Entrances need to be accessible to all, and you never want to be in the position of having a gap in accessibility pointed out to you by the individual who has been adversely affected. New Security Entrance Installation By communicating early and often with your personnel, you can alleviate a great deal of the anxiety Once you have made the decision about which security entrances to install, training your personnel on how to use the new security entrances – both before and after the installation – will help to smooth the transition. Because workplace security is such a big issue right now, it makes sense to discuss the new entrances in the context of helping to maintain a safer environment. They will prevent violent individuals from entering, decrease theft, and most of all, promote greater peace of mind during the workday. If you can help them take control of their own safety in a responsible way, you have achieved much more than just a compliant workforce. By communicating early and often with your personnel, you can alleviate a great deal of the anxiety and concern that surrounds a significant change in the work environment. Schedule Group Meetings Consider your employees; what type of communications do they respond best to? A few suggestions to educate staff on the benefits of the new entrances include: Typically, you would communicate a general message 2-3 months in advance and then provide more specific information (for example, impacts to fire egress, using certain entrances during construction) in a follow up message closer to the installation date. Schedule group meetings to: announce the rationale for increased security, share statistics on crime, review the new security changes that are coming, show drawings/photos of the new doors/turnstiles, and show the orientation videos available from the manufacturer. These meetings are an excellent way to work through user questions and directly address any concerns. Once the installation of a new security system is complete, it is a good idea to have an "ambassador" on board to help employees use these new systems Ensure You Monitor Public Areas If you are implementing a lot of new changes, such as a new access control system, new guard service and security entrances, you might consider hosting a ‘security fair’ on a given day and have the selected vendors come for a day with tabletop displays to meet employees and answer questions during their lunch. This could be a great way to break the ice in a large organization. Make user orientation videos (provided by the manufacturer) available in several ways, for example: Intranet Site Monitors in public areas—lounges, cafeteria, hallways, etc. Send to all staff as email attachments Immediately after installation, once the doors or turnstiles are operational but before they are put into service, train ‘ambassadors’ on how to use the door/turnstile. Have these people monitor and assist employees during peak traffic times. What Is The Ultimate Success Of The Installation? By communicating clearly and openly with your population you can greatly facilitate adoption and satisfaction If you have thousands of employees, consider dividing them into groups and introduce the new entrance to one group at a time (Group A on Monday, Group B on Tuesday, etc.) to allow a little extra orientation time. Place user education ‘quick steps’ posters next to the door/turnstiles for a few weeks to help employees remember the basic steps and guidelines, e.g., ‘stand in front of the turnstile, swipe badge, wait for green light, proceed.’ Ask your manufacturer to provide these or artwork. While there are always going to be people who are resistant to change, by communicating clearly and openly with your population you can greatly facilitate adoption and satisfaction. Your responsiveness to any issues and complaints that arise during and after the implementation is equally fundamental to the ultimate success of the installation.
It’s not surprising that people are nervous about the security of newer technologies, many of which are part of the Internet of Things (IoT). While they offer greater efficiency and connectivity, some people still hesitate. After all, there seems to be a constant stream of news stories about multinational corporations being breached or hackers taking control of smart home devices. Both of these scenarios can feel personal. No one likes the idea of their data falling into criminal hands. And we especially don’t like the thought that someone can, even virtually, come into our private spaces. The reality, though, is that, when you choose the right technology and undertake the proper procedures, IoT devices are incredibly secure. That said, one of the spaces where we see continued confusion is around access control systems (ACS) that are deployed over networks, particularly in relation to mobile access, smartcards, and electronic locks. These technologies are often perceived as being less secure and therefore more vulnerable to attacks than older ACS systems or devices. In the interest of clearing up any confusion, it is important to provide good, reliable information. With this in mind, there are some myths out there about the security of ACS that need to be debunked. The fact that these devices communicate with an ACS via Bluetooth or Near Field Communication (NFC) leads to one of the main myths we encounter Myth #1: Mobile Credentials Are Not Secure The first myth we have to look at exists around mobile credentials. Mobile credentials allow cardholders to access secured doors and areas with their mobile devices. The fact that these devices communicate with an ACS via Bluetooth or Near Field Communication (NFC) leads to one of the main myths we encounter about the security of credentialed information. There is a persistent belief that Bluetooth is not secure. In particular, people seem to be concerned that using mobile credentials makes your organization more vulnerable to skimming attacks. While focusing on the medium of communication is an important consideration when an organization deploys a mobile credentialing system, the concerns about Bluetooth miss the mark. Bluetooth and NFC are simply channels over which information is transmitted. Believing that Bluetooth is not secure would be the same as suggesting that the internet is not secure. In both cases, the security of your communication depends on the technology, protocols, and safeguards we all have in place. So, instead of wondering about Bluetooth or NFC, users should be focused on the security of the devices themselves. Before deploying mobile credentials, ask your vendor (1) how the credential is generated, stored, and secured on the device, (2) how the device communicates with the reader, and (3) how the reader securely accesses the credential information. When you deploy smartcard technology as part of your ACS, you should choose the latest generation, such as MiFARE DesFIRE EV1 or EV2 and HID iCLASS SEOS Myth #2: All Smartcards Are Equally Secure The question “how secure are my smartcards?” is a serious one. And the answer can depend on the generation of the cards themselves. For example, while older smartcards like MiFARE CLASSIC and HID iCLASS Classic offer better encryption than proxy cards and magstripe credentials, they have been compromised. Using these older technologies can make your organization vulnerable. As a result, when you deploy smartcard technology as part of your ACS, you should choose the latest generation, such as MiFARE DesFIRE EV1 or EV2 and HID iCLASS SEOS. In this way, you will be protecting your system as well as your buildings or facilities. Some traditional readers and controllers can also pose a serious risk to your organization if they use the Wiegand protocol, which offers no security. While you can upgrade to a more secure protocol like OSDP version 2, electronic locks are a very secure alternative worth considering. It is also important to understand that not all smartcard readers are compatible with all smartcard types. When they are not compatible, the built-in security designed to keep your system safe will not match up and you will essentially forego security as your smartcard-reader will not read the credentials at all. Instead, it will simply read the non-secure portion—the Card Serial Number (CSN) —of the smartcard that is accessible to everyone. While some manufacturers suggest that this is an advantage because their readers can work with any smartcard, the truth is that they are not reading from the secure part of the card, which can put your system and premises at risk. Using electronic locks can help protect facilities and networks through various security protocols, including encryption and authentication Myth #3: Electronic Locks Are More Vulnerable These days, there are still many who believe that electronic locks, especially wireless locks, are more vulnerable to cybercriminal activity as compared to traditional readers and controllers. The concern here is that electronic locks can allow cybercriminals to both access your network to get data and intercept commands from the gateway or nodes over the air that would allow them access to your buildings or facilities. The reality is that using electronic locks can help protect facilities and networks through various security protocols, including encryption and authentication. Additionally, because many of these locks remain operational regardless of network status, they provide real-time door monitoring. This means that many electronic locks not only prevent unauthorized access but also keep operators informed about their status at all times, even if a network goes down. Outdated technology and old analogue systems are more vulnerable to attacks When it comes to deploying electronic locks, it is important to remember that, like any device on your network, they must have built-in security features that will allow you to keep your information, people, and facilities safe. Be Prepared To Unlock Future Benefits Ultimately, the information in your IP-based ACS is at no greater risk than any other information being transmitted over the network. We just have to be smart about how we connect, transmit, and store our data. In the end, maintaining the status quo and refusing to move away from old technology is not a viable option. Outdated technology and old analogue systems are more vulnerable to attacks. The reason it is so important to debunk myths around ACS and, at the same time, get people thinking about network security in the right way is that network-based systems can offer an ever-increasing number of benefits. When we deploy new technology using industry best practices and purchase devices from trusted vendors, we put ourselves and our networks in the best possible position to take full advantage of all that our increasingly connected world has to offer.
PCSC, a designer and manufacturer of access control solutions and Coolfire Solutions, a St. Louis based software company known for creating Military-Grade situational awareness platforms, collaborate to deliver top-level capabilities for access and security. Coolfire Solutions created its innovative Ronin Platform to deliver software that sits on top of existing systems and infrastructure to transform data into actionable intelligence. Originally developed for the U.S. military, the Ronin Platform is being widely adopted by industry leaders and organizations who recognize the importance of placing the right data, in the right hands, in real-time, so that intelligent decisions can be made. LiNC-NXG PSIM System Stacking the Ronin Platform on top of the data provided by PCSC’s LiNC-NXG PSIM system provides a robust, real-time common operational pictureStacking the Ronin Platform on top of the data provided by PCSC’s LiNC-NXG physical security information management system provides a robust, real-time common operational picture, visually representing physical security events, and enabling a coordinated security response. For instance, urgent security related event details are pushed to mobile devices of nearby security officials for immediate action. An additional benefit, in the case of an on-premises environment, the underlying access management system is not exposed, only the top-level data is managed. Extend The Capabilities Of Access Solutions “An extremely impressive GUI for our industry and an actionable set of features extend the capabilities of PCSC’s access solutions for real-time response,” said Mas Kosaka, President and CEO of PCSC. “The expansion possibilities are virtually limitless too. We’re excited to debut the capabilities of Ronin to our Business Partners during the PCSC Symposium in conjunction with ISC West, the largest security industry trade show in the U.S.” Coolfire Solutions and PCSC have the experience and capabilities to transform the way security professionals do their job every day" “Coolfire Solutions and PCSC have the experience and capabilities to transform the way security professionals do their job every day. We can maximize the value of existing technology investments by combining data from any source and making it actionable," said Don Sharp, CEO at Coolfire Solutions. "Security professionals have an incredibly challenging job and it’s only getting tougher. By bringing all of their critical data onto a single pane of glass we can increase the level of security while driving significant operational efficiencies.”
The BioConnect Identity Platform provides an integration of Suprema's biometric solutions with the majority of leading access control systems BioConnect and Suprema have announced Suprema's launch of the BioConnect Identity Platform. Developed by BioConnect, Suprema's long-standing strategic partner in North America, the BioConnect Identity Platform provides an integration of Suprema's biometric solutions with majority of the leading access control systems in the global security market. Under the appointment, Suprema will provide and support the BioConnect Identity Platform globally from June 1st, 2016 onward. Powerful Integration FeaturesWith the BioConnect Identity Platform's powerful integration features and BioConnect's and Suprema's partner eco-systems, enterprises benefit from the ability to take advantage of deploying biometrics with their existing (or their choice of) access control vendor, standards, devices and way of operating. The BioConnect Identity Platform enables the seamless integration of Suprema's biometric terminals with access control systems, ERP and time and attendance systems, supporting biometric and multi-factor authentication, biometric enrollments and user ID management. One Central System The solution enables greater security, identity assurance and convenience from one central system and has ultimately changed the way that the physical access control market can consume biometrics as an authentication strategy. No other manufacturer around the world has been able to offer this level and quality of integrations - with the BioConnect Identity Platform boasting over 20. "With the BioConnect Identity Platform, BioConnect complements our goal of providing industry-leading biometric security solutions to the global market. The product is a ready-made bridge solution that provides easier integration of cutting-edge Suprema biometric technology together with a customer's choice of leading access control systems," said Young Moon, VP of Suprema. "We are looking forward to providing the BioConnect Identity Platform to a more global security market and are excited to offer our customers a seamless and cost-effective way of adopting Suprema's biometric security solutions," Moon added. Innovative Technologies From the perspective of the access control provider, the BioConnect Identity Platform opens up the option to provide a Suprema biometric solution and continue to benefit from the complete product line as Suprema brings new and innovative technologies to market. "As a Suprema partner we have experienced a lot of growth in the North American and UK markets due to its leadership and continued emphasis on producing biometric products of superior quality, versatility and range," said Steve Greb, Strategic Director of Business Development at BioConnect. "We're very excited to draw on Suprema's impressive partner network and continue to build out our Quest for Rightful Identity on a global scale." Integration With Leading Systems The BioConnect Identity Platform integrates the following leading access control systems with the Suprema biometric terminals; ACT ACTManage, AMAG Symmetry, Axis A1001, Brivo OnAir/OnSite, Genetec Security Center, IMRON IS2000, Lenel OnGuard, Open Options dnaFusion, Paxton Net2, Honeywell ProWatch, Honeywell WINPAK, RS2 AccessIT!, S2 Netbox, Software House CCURE 9000, Stanley SecureNET, Gallagher Command Centre and now PCSC LiNC-PLUS. Suprema and BioConnect will team together to showcase the BioConnect Identity Platform at IFSEC 2016 in London on June 21st-23rd at Stand E1400.
Systems may be reliable and performing as originally intended, but can also beoutdated in comparison to current technology offerings Let’s start by defining what a legacy system is in the context of a security control system. Legacy refers to an installed and operating security control system made up of numerous components, both hardware and software, that have been eclipsed by newer technologies. A shortage of parts and pieces may be creeping in, and it’s also likely the older stuff has a service tech scratching his head when faced with a configuration setting or data entry protocol. The newer technologies, however, may still be providing much of the desired functionality required by the legacy system user. Legacy in this context then is not necessarily a pejorative term. The system may be both reliable and performing as originally intended but is outdated in comparison to current technology offerings both from a communications standpoint and as it relates to applications and data mining. So what to do? For openers, as my dad would day, do a Ben Franklin list of do’s and don’ts. Naturally you’d love to move to a new, bigger or smaller, better and faster system. But, first, what does that list look like? I for one think is might begin to look like this: Things To Do When Managing Legacy Systems Do you have a handle on your current technology capabilities? Many legacy systems are underutilised and have features that are not used. Revisit your systems capabilities: You are likely to make some pleasant discoveries. Do you have a handle on your current technology capabilities? Many legacy systems are underutilized and have features that are not used Do you currently know how all of the pieces and parts in your system are currently communicating? A great start for planning the next steps is to understand the “plumbing.” Associated with that is the location of communication; specifically, how are things wired and where are they terminated, recorded and catalogued? What does your power distribution for the system components look like? Do you have backup and other means of maintaining operations during a loss of power, and where is that stuff? If not done recently, this step provides an opportunity to ensure you are ready for things that don’t happen and also to revisit codes. It’s always worthwhile if a maintenance provider is available to a system test in this area, or it can be self-conducted. What is the state of your record management, and when was the last time you did some basic housekeeping, such as backup and the like? If you don’t remember when you did it last, stop reading and go do some housekeeping — it’s clearly due now! What works for you and your organization, and what have you developed a work-around for? If your “super users” have found ways to manage desired system outcomes by some clever workaround, are there other desired features? Do you have a relationship with an authorized service provider or an on-staff trained first responder? Do you have attic stock (stuff you own) to support those older components? I like to think of it like making a road trip with a spare tire and basics in the trunk in case an extended unplanned stop on the side of the road interrupts your trip. Have you developed a plan for an eventual upgrade? What’s first, what does it cost and whom will I let provide pricing to do so? Rip-and-replace isn't your only option. There are many products and servicesavailable to migrate from a legacy to next steps utilizing embedded infrastructure Planning And Management What are my/your basic functional requirements, and where are the gaps now you must fill for enterprise sustainability? That legacy system likely has paid its way and now needs to be retired; I’m not ready either. Do you have a business case for this refresh – applications, data mining, new and reporting and risk mitigation strategies? If not, you are missing this first step of legacy migration planning and management. Managing the age includes a system exit strategy. Getting C suite, namely your CFO’s, attention is key; sustainability of your enterprise is 101, so functionality as it relates to risk mitigation is essential to keeping your entity flourishing. So What Are The DON’T’s? Don’t trivialize the migration or response to the Do’s or you’ll end up in a big To Do. Don’t minimize the relationship with existing integration resources you have worked with, old and new. Organizations evolve, some for the best, some not so. Refresh these relationships as well; resources are like bridges – you never know when a crossing is needed. Don’t rush into the latest and greatest; be wary of who’s definition you subscribe to. There’s a reason they call it the “cutting” edge. Don’t believe that rip-and-replace is your only option. There are many legacy systems in our industry, and many well-made and well-thought-out products and services are available to migrate from a legacy to next steps utilising embedded infrastructure. The bottom line: Define your parameters, select your partners and engage companies with a history of legacy migration and thought leadership. If your legacy includes some products with forward-thinking engineering thought leadership, you may be able to manage your needs with security control board-level replacements or the flashing of new firmware and upgrades to software. I‘m aware of several companies whose products elegantly move through time, adding new applications and functionality without wholesale rip-and-replace. These legacies carry on. The market has responded to you and others eager to know their options. There are many ingenious and clever ways to upgrade communications and transport of data, reliable mainstream products designed to meet this challenge head-on. There are solutions aimed at allowing you to use current IT and Internet of Things (IoT) apps and functionality. However, there are also quite a number of technology partners able help make the leap from analog to digital using existing pathways. The bottom line: Define your parameters, select your partners and engage companies with a history of legacy migration and thought leadership. They are most likely to produce the best results and allow you to leave behind the legacy you want to be associated with.
Nine Ways To Make Your Retail Security System Work HarderDownload
Financial Institutions Require Future-Ready Physical Security TechnologiesDownload
Understanding The Trade-Off Between Image Resolution And Field Of ViewDownload
- ASSA ABLOY Secures 5 Universities With Its Wireless Access Control Systems
- Fermax DUOX 2 Wires Solution For Evelina London Children's Hospital In UK
- UK Department Store Installs Traka’s Intelligent Locker Solution To Protect Customer Service Mobile Equipment
- Mul-T-Lock’s ECLIQ Locks Ensure Authorized Access Control At Glenveagh National Park