Everfocus Video Servers (IP Transmission) / Video Encoders(3)
Browse Video Servers (IP Transmission) / Video Encoders
Video server (IP transmission) products updated recently
Critical infrastructure facilities that must secure large areas with extended outer boundary and numerous entry points, present a particularly difficult challenge when it comes to perimeter protection. As such, true end-to-end perimeter protection calls for the utilization of a sophisticated, multi-layered solution that is capable of defending against anticipated threats. Integrated systems that incorporate thermal imaging, visible cameras, radar and strong command and control software are crucial for covering the various potential areas of attacks. Let’s look at these technologies and the five key functions they enable to achieve an end-to-end solution that provides intrusion detection, assessment and defense for the perimeter. 1. Threat Recognition The first step in effectively defending against a threat is recognizing that it’s there. By combining state-of-the-art intrusion detection technologies, facilities can arm themselves with a head start against possible intruders. An exceptionally important aspect of effective perimeter protection is the ability to conduct 24-hour surveillance, regardless of weather conditions, environmental settings, or time of day. Visible cameras do not perform as well in low light scenarios and inclement weather conditions. However, thermal imaging cameras can provide constant protection against potential intruders, regardless of visual limitations, light source or many environmental factors. In fact, facilities such as power stations located near bodies of water can use thermal cameras to create what is known as a “thermal virtual fence” in areas where they are unable to utilize the protection of a physical fence or wall. Deterring suspicious activity can be achieved through real-time two-way audio, a simple but powerful tool Critical infrastructure applications require not only continuous video surveillance and monitoring, but also a solution that yields highly reliable intrusion detection, with fewer false alarms. This need makes advanced video analytics a must for any adequate surveillance system. Features like dynamic event detection and simplified data presentation are game changing in supporting accurate intrusion analysis and facilitating a proactive response. Advanced analytics will provide multiple automated alarm notification options, including email, edge image storage, digital outputs or video management software (VMS) alarms. Incorporating high quality, unique and adaptive analytics can virtually eliminate false alarms, allowing security personnel to respond more efficiently and effectively, while also lowering overall cost for the end user. While surveillance technologies such as radar, thermal imaging and visible cameras, or video analytics work well on their own, utilizing all of these options together provides an advanced perimeter detection system. For example, ground surveillance radar can detect possible threats beyond the fence line as they approach and send a signal to pan-tilt-zoom (PTZ) cameras, triggering them to slew to a specific location. From there, embedded analytics and visible cameras can further identify objects, notify authorized staff, and collect additional evidence through facial recognition or high-quality photos. 2. Automatic Response Systems Once an intrusion attempt is discovered, it is important to act fast. Organizing a response system that can initiate actions based on GPS location data, such as the slewing of PTZ cameras, automated intruder tracking or activated lighting sensors, greatly increases staff’s situational awareness while easing their workload. For instance, thermal imagers deployed in conjunction with video analytics can be used to generate an initial alarm event, which can then trigger a sequence of other security equipment and notifications for personnel to eventually respond to. Having all of this in place essentially lays the entire situation out in a way that allows responders to accurately understand and evaluate a scene. Power stations located near bodies of water can use thermal cameras to create a “thermal virtual fence” in areas where they are unable to utilize the protection of a physical fence or wall 3. Deterring Suspicious Activity After the designated auto-response mechanisms have activated and done their job, it is time for responders to acknowledge and assess the situation. From here, authorized personnel can take the next appropriate step toward defending against and delaying the threat. Deterring suspicious activity can be achieved through real-time two-way audio, a simple but powerful tool. Often, control room operators can diffuse a situation by speaking over an intercom, telling the trespasser that they are being watched and that the authorities have been notified. This tactic, known as ‘talk down’, also allows officers to view the intruder’s reaction to their commands and evaluate what they feel the best next step is. If individuals do not respond in a desired manner, it may be time to take more serious action and dispatch a patrolman to the area. 4. Delay, Defend, Dispatch And Handle The possible danger has been identified, recognized and evaluated. Now it is time to effectively defend against current attacks and slow down both cyber and physical perpetrators’ prospective efforts. Through the use of a well-designed, open platform VMS, security monitors can manage edge devices and other complementary intrusion detection and response technologies, including acoustic sensors, video analytics, access control and radio dispatch. A robust VMS also enables operators to control functions such as video replay, geographical information systems tracking, email alerts and hand-off to law enforcement. With the right combination of technologies, facilities can take monitoring and evidence collection to the next level The primary purpose of the delay facet of the overall perimeter protection strategy is to stall an attempted intrusion long enough for responders to act. Access control systems play a key role in realizing this objective. When a security officer sees a non-compliant, suspicious individual on the camera feed, the officer can lock all possible exits to trap them in one area all through the VMS. 5. Intelligence: Collect Evidence And Debrief More data and intelligence collected from an event equals more crucial evidence for crime resolution and valuable insight for protecting against future incidents. With the right combination of technologies, facilities can take monitoring and evidence collection to the next level. One innovative resource that has become available is a live streaming application that can be uploaded to smart phones and used for off-site surveillance. This app gives personnel the power to follow intruders with live video anywhere and allows operators to monitor alarm video in real-time. Geographic Information System (GIS) maps are computer systems utilized for capturing, storing, reviewing, and displaying location related data. Capable of displaying various types of data on one map, this system enables users to see, analyze, easily and efficiently. Multi-sensor cameras, possessing both visible and thermal capabilities, provide high-contrast imaging for superb analytic detection (in any light) and High Definition video for evidence such as facial ID or license plate capture. Integrating these two, usually separated, camera types into one helps to fill any gaps that either may normally have. Still, in order to capture and store all of this valuable information and more, a robust, VMS is required. Recorded video, still images and audio clips serve as valuable evidence in the event that a trial must take place to press charges. Control room operators can use data collection tools within their VMS to safely transfer video evidence from the field to the courtroom with just a few clicks of their mouse. More advanced video management systems can go a step further and package this data with other pertinent evidence to create a comprehensive report to help ensure conviction.
For those of you old enough to remember, video matrix switchers were once the heyday of surveillance camera control. These cumbersome antiques were at the heart of every major video surveillance system (video surveillance at the time) in premier gaming properties, government installations and corporate industrial complexes. They required more physical labor to construct and configure than perhaps the pyramids – maybe not – but you get the picture. And then digital video made its way in to the market and everything changed, transforming the physical demands for camera control and management from a hardware-centric to a software driven process. We’ve come a long way in a few short years, and the borders that once defined IT and security continue to diminish, if not disappear completely There’s no doubt that this migration also presented significant challenges as many security professionals often struggled with all things IT and software programming being one of the industry’s soft spots. Fortunately, we’ve come a long way in a few short years, and the borders that once defined IT and security continue to diminish, if not disappear completely. However, the complexities of today’s VMS functionality can be intimidating for anyone tasked with installing one of these systems given all of the user-defined options available from the simplest camera sequencing and bandwidth allocations to mobile management and enterprise level integration. This is where truly advanced VMS solutions need to shine on both the operations and the design/build sides of the equation. Smart VMS Design There are more solutions products labelled “VMS solutions” out there than ever before. The issue is the fact that many of these “solutions” really don’t fall into the category of a true VMS by today’s standards but offer basic camera and NVR control. No doubt that there is a place for such software programs in the market. However, VMS solutions from the likes of OnSSI and other industry-leading companies offer distinct and superior management and control capabilities for demanding security and business intelligence applications. Perhaps of equal importance, these top-tier VMS solutions incorporate provisions for installers, so they have a clear and easier implementation path. OnSSI offers VMS solutions with smart camera drivers Here are seven attributes that can assist with the design and implementation of an advanced VMS solution: 1) Open Architecture Platform We need the ability to easily integrate with other systems and scale for future developments and physical system growth The ability to easily integrate with other systems and scale for future developments and physical system growth is largely dependent on a systems platform architecture. Here’s where VMS solutions with open architecture provide a distinct advantage. Open-architecture solutions expand functionality by facilitating greater integration between multiple systems and components. This not only makes VMS solutions with open architecture easier to implement, it makes them extremely cost-efficient by eliminating the need for proprietary solutions. Open architecture systems also provide adherence to industry standards such as ONVIF and PSIA, as well as compression formats such as H.265 and MJPEG, and help ensure system integration and support of an extensive range of manufacturers’ cameras and off-the-shelf hardware. Be wary of VMS solutions with limited camera manufacturer support. 2) Simple Licensing Processes And Pricing Camera licenses and pricing is always a touchy subject, as any misunderstanding of a specific VMS solutions’ licensing terms can prove to be costly after the fact. And it often seems that some VMS suppliers have gone to great lengths to complicate the process as to obscure actual Total Cost of Ownership (TCO). Perhaps the most direct, simple and straightforward camera licensing and pricing method is to have one license per IP address used by each camera/encoder on multi-channel devices. These should be perpetual licenses with no required annual fees or subscriptions. Additionally, the licensing agreement should be all inclusive without added fees for multiple clients, failover servers, active directory support, I/O devices, redundant management servers, technical support or security patches and updates. 3) Mixing And Matching Camera License Types The ability to mix and match different camera license types within the same system helps facilitate a seamless and simple migration of new and pre-existing systems with minimal downtime or interruption in operation. The ability to mix and match camera licenses not only saves valuable design and installation time, it can provide considerable savings when integrating large, multi-tenant systems. Mix and match capabilities also allow system designers to apply specific feature sets to specific groups of cameras to best leverage functionality and budgets, as well as providing the flexibility to implement an on-site, virtual, or cloud-based VMS solution, without any additional cost. 4) Auto Camera Detection And Configuration Another VMS set-up feature that eases the install process is the ability to forego device registrations or MAC address requirements Another VMS set-up feature that eases the install process is the ability to forego device registrations or MAC address requirements. This functionality allows installers to instantly locate cameras on the network and configure them centrally so they can easily replace older cameras while seamlessly retaining video recorded from them. The auto detection capability should also include the ability to detect and import CSV files, which can then be stored and used to configure camera templates for future camera installation profiles. 5) Smart Camera Driver Technology VMS solutions with smart camera drivers offer valuable assistance during system implementation, and any time new cameras are added to the network or replace older models. Manufacturer-specific smart camera drivers expand the range of model-specific static drivers. Instead of storing the device’s information (codecs, resolutions, frame rates, etc.) statically, a VMS with smart camera drivers queries devices for their capabilities using the manufacturers’ proprietary protocol. All that is required for configuration is that the camera is available on the network. Smart camera drivers eliminate the need to wait for model-specific drivers or installation of driver packs, allowing for newly released cameras to be used immediately. Network security is an area where leading VMS suppliers like OnSSI have ramped up development efforts to stay ahead of hackers 6) Importance Of Network Security Network Security is perhaps the greatest challenge faced by industry professionals today Network security is perhaps the greatest challenge faced by industry professionals today. This is an area where leading VMS suppliers like OnSSI have ramped up development efforts to stay ahead of hackers. New security developments to look for include TLS 1.2 encryption protocols for camera-to-server communications (SSL 3.0 supported for older cameras), as well as server-to-server communications. Additional safeguards to consider include: randomized video databases with no camera identification information to secure recorded data; support for Active Directory authentication; AES encryption between servers and clients; and AES encrypted exporting. 7) Automatic Updates Regardless of the supplier you select for your VMS solution, they should be consistently providing new updates and security patches on a frequent if not regular basis. Keeping up with these updates can be a burden and are often overlooked leading to system failures and breeches. Advanced VMS solutions now feature automatic update service checks on a system-wide basis, eliminating the need to manually update individual servers and devices. This ensures that your VMS system always has the latest drivers, fixes and updates which assures overall security while reducing TCO. So next time you’re getting a demo of the latest and greatest VMS solution, remember to ask what it offers in terms of design and implementation tools. Half the battle with new technologies is getting them installed and working properly. Without the right tools to accomplish these critical first steps, all the functionality in the world will do you little good.
It amazes me how in a few short years security systems have gone from simple, dumb cameras witnessing events to intelligent eyes, ears, speech and touch solutions that boost situational awareness far beyond human capabilities. It seems the only senses missing from the equation now are smell and taste. And who knows, someone might be working on those in a lab somewhere right now. But what’s really fascinating to me is how the Internet of Things (IoT) has opened a world of possibilities for transforming security technology into something new yet again. With IoT we’re able to push and pull nuggets of intelligence from sources we never considered before: environmental sensors, pressure plates, door lock timers and much more. It’s helped us break through the constraining mindset that security systems are strictly single-purpose. With interconnectivity at the core, we’re starting to imagine myriad ways to apply these tools to challenges outside the realm of security. Here are just a few examples. Flood Management Assistance Network camera adds another dimension and timeliness to flood management by helping responders investigate remotely As recent hurricanes and floods have shown, water damage can be devastating to a community. That’s why some municipalities are using their city surveillance cameras in conjunction with water sensor to proactively address the problem. Water sensors collect data from multiple sources such as rain gutters, sewer systems and pump stations, in order to monitor fluctuations in water levels and water quality. If an alert triggers, having a network camera in proximity to visually verify the situation helps responders determine the best course of action. For instance, if multiple water detection sensors trigger alerts simultaneously or sequentially over a large area it’s probably due to natural runoff from recent rainfall. But without eyes on the scene, how can you be sure? Network camera adds another dimension and timeliness to flood management by helping responders investigate and identify the cause of a trigger remotely. It might be a fire hydrant spewing water, a water main break or even a chemical spill. With video streaming live to the command center, staff can remotely inspect the area, determine the cause of the trigger and decide whether remediation is required, thus avoiding the expense of dispatching an investigative crew to a non-event. Some municipalities are using their city surveillance cameras in conjunction with water sensor to proactively address the problem Environmental Control Assistance Data centers house the lifeblood of a business so it’s no wonder why companies work hard to protect them. We’re all familiar with the integration of network cameras with access control systems to visually verify who is actually using the credentials. Network camera adds another dimension and timeliness to flood management by helping responders investigate and identify the cause of a trigger remotely But there’s another aspect to protecting data centers and that’s environment control. Data centers need to maintain optimum humidity and temperature for the racks of electronics. When environmental sensors in the facility detect out-of-norm ranges technicians can remotely command a network camera to zoom in on the gauges and help them determine whether remediation might be necessary. Coupling network cameras with other sensors in the data center can provide visual confirmation of other conditions as well. For instance, every time a data rack door-open-close sensor detects an event it can trigger the camera to pan to the location and stream video to security. Some data centers employ weight sensors at the doorway to weigh personnel and equipment as they enter the room and when they exit to ensure no additional hardware is being taken out of the facility or left inside without permission. Any discrepancy would trigger the camera to zoom in for a close-up of the individual’s face and send a visual alert and ID information to security. Roadway Management And Parking Assistance Network cameras have long played a part in city-wide traffic management. Adding video analytics and integration with network sensors, makes those cameras that much smarter and versatile. They can detect cars driving in bike lanes or driving in the wrong direction and capture license plates of offenders. Their ability to detect anomalous traffic flow patterns can be integrated with car counting sensors, networked electronic road signs and traffic light systems to automatically redirect vehicles to alternate routes. They make great, intelligent parking lot attendants, too. Working in conjunction with weight sensors network cameras can count vehicles coming into and leaving a lot or garage and verify when the facility has reached capacity. License plate recognition and video analytics can be used to ascertain that a vehicle entering a reserved parking space doesn’t match the credentials and vehicle attributes in the database. With the addition of noise sensors and audio analytics, network cameras can improve roadway and parking facility safety by detecting and identifying specific sounds – breaking glass, car alarms, gun shots, and aggressive speech – and triggering a visual alert to first responders. Network cameras can improve roadway and parking facility safety by detecting and identifying specific sounds and triggering a visual alert to first responders Shopper Experience Assistance In the early days of online shopping, e-tailers designed their sites to replicate the in-store customer experience. In an ironic turn of events, today brick-and-mortar stores are trying to mirror the online shopping experience. To do so, they’re turning their security systems into adjunct sales assistance. With network video and audio system automation they can recognize and acknowledge loyal customers with personal greetings. Retailers are applying people counting video analytics to checkout activity to create rules-based consistency in customer service With heatmapping analytics they can measure how much time a customer spends in a specific department or observe how they walk through the aisles of the store. They can track shopping behaviors such as items looked at that made it into the cart or didn’t, or whether a customer actually checked out or left the merchandise behind. By capturing these shopping patterns and trends retailers can shape a more positive, more profitable customer shopping experience. For instance, integrating video analytics with point of sale systems and RFID sensors on merchandise tags can result in timely alerts to sales associates to recommend additional merchandise. This is a case of emulating how e-tailers let the customer know that other customers who bought X often also purchased items Y and Z. Or to avoid disappointing customers due to stock outages, retailers are linking weight sensors and video analytics to make sure their shelves are well-stocked and if not, quickly alert associates to what items need to be restocked. Capturing Business Intelligence Retailers are also using video cameras to monitor checkout queues and trigger automated announcements over the public-address system, closed system such as smartphones or other wireless communications devices that checkers are needed rather wait for a person to call for backup. IoT laid the groundwork for network security solutions to seamlessly integrate with other IP-based technologies, sensors and programs They’re applying people counting video analytics to checkout activity to create rules-based consistency in customer service. While retailers will always use their surveillance camera for loss prevention, they’re finding that integrating traditional technology in new ways can yield even bigger returns. Linking network video surveillance, video analytics, network communications system and sensors with point-of-sale systems and customer loyalty databases, retailers are capturing the business intelligence they need to get back in the game and make brick-and-mortar a greater overall experience than online shopping. A Natural Cross-Over Technology This trend towards integration has forever changed how organizations view their investment in security technology. The intelligence and versatility of a tool that can see, verify and analyze what’s happening in real-time is spurring users to tap its cross-over potential for a host of other tasks that could benefit from more astute situational awareness – everything from manufacturing and equipment maintenance to logistics, inventory control and beyond. IoT laid the groundwork for network security solutions to seamlessly integrate with other IP-based technologies, sensors and programs. How we capitalize on that connection is only limited by our imagination.
EverFocus, GeoVision, PLANET and VIVOTEK—were the highlights of a press conference at ISC West 2018, organized by the Taiwan External Trade Development Council (TAITRA), Taiwan’s foremost trade promotion organization. These breakthrough products, with potential to transform the global security market, include a futuristic Virtual Reality 720° camera, a facial recognition dome camera, a cutting-edge Internet of Vehicle (IoV) fleet surveillance system, an IP camera armed with anti-intrusion software, and a next-gen intuitive colour touch LCD switch.We are proud to showcase Taiwan’s finest at one of the United States’ most prestigious security tradeshows" Extensive Engagements “Today, the United States and Taiwan enjoy an ever-expanding relationship and extensive engagement in many fields, especially in electronic security." "Our products launch event unveil some of Silicon Island’s most cutting-edge products and technologies in the areas of IoT and Internet of Vehicles (IoV), unmanned security and cyber + physical integration." "We are proud to showcase Taiwan’s finest at one of the United States’ most prestigious security tradeshows and look forward to having participants experience the future of security,” said TAITRA Executive Director Simon Lai. These Taiwanese ICT companies, all winners of the Taiwan Excellence Awards, generated a lot of excitement and buzz with the unveiling of their new products at the conference. XFleet Management Platform EverFocus demonstrated its engineering and research prowess as Regional Technical Sales Manager Marques Phillips unveiled details of the company’s XFleet Management Platform which he described as not only transforming the IoV experience, but the future of vehicle fleet management. The new solution allows users to easily track, monitor and manage any type of fleet vehicles on a Web browser anywhere and anytime. With Xfleet, users can not only reduce overall costs by effectively utilizing resources such as vehicles, fuel, and manpower, but also improve management efficiency and business performance by keeping and analysing the historical records of the vehicle data as needed.GeoVision cameras can recognize human faces in 1.5 seconds, making possible identification of authorized versus un-authorized personnel Virtual Reality Camera GeoVision showed off the VR 360, the world’s first Virtual Reality camera that can provide a 720° view. President David Huang said it’s the only camera with two Fisheye lenses to provide a floor to ceiling, 720° view with no blind spots. It’s ideal for security environments such as airports, train stations, city streets, harbors and highways. The camera uses advanced computer vision technology to simulate a three-dimensional, highly realistic, and practical 3D space. It’s water-proof, vandal-proof and dust resistant, making it ideal for outdoors. It also boasts IR Night Mode for clear images even in dark environments. Huang also demonstrated new facial recognition IP dome camera with cutting-edge AI. It can recognize human faces in 1.5 seconds, making possible identification of authorized versus un-authorized personnel, creation of blacklists for restricted personnel, and VIP lists to improve relationship management. Intruitive Touch LCD Switch PLANET explained how the Intuitive Touch LCD Switch makes it possible to easily manage powered devices in real time, greatly enhancing network management efficiency. Tammy Huang, Sales Manager, noted that it’s the unique touch LCD that makes such management possible. In addition to the touch LCD interface, the solution features L2+ switching, intelligent PoE management and an ONVIF support function. An Industrial flat-type touch LCD switch model is also offered, making possible management of large-scale networks.VIVOTEK’s Smart Stream II and H.265 technology allows users to benefit from reduced bandwidth and data storage demands VIVOTEK’s Network Cameras With the theme ‘Security within Security,’ Shengfu Cheng, Director of Marketing and Product Development, demonstrated the first cybersecurity enhanced network cameras in the IP surveillance industry. The three new cameras are armed with Trend Micro’s anti-intrusion software, allowing them to automatically detect and prevent credential attacks and block suspicious events. They also feature VIVOTEK’s Smart Stream II and H.265 technology, allowing users to benefit from reduced bandwidth and data storage demands by up to 90% more than systems employing H.264. Low-Light Surveillance Add to that a new generation of night visibility technology, Supreme Night Visibility II (SNV II) which allows them to reproduce high-quality colour images, even in very low-light conditions. In the security industry, the United States is the largest buyer of electronic security products and spent $12.3 billion on imports in the field in 2016. And Taiwan constitutes North America’s 4th largest trade partner in the electronic security field, with an import value that was close to $1 billion in 2016. Throughout ISC West 2018, Taiwan exhibitors will present their latest innovations. In pursuit of Asia’s Silicon Valley vision of propelling Taiwan to the international forefront of technology, Taiwanese companies continue their pursuit of excellence and innovation.
Companies like – VIVOTEK, QNAP, EverFocus Electronics & PLANET Technology to display their products An exclusive showcase of security technology excellence will be unveiled on the opening day of IFSEC International 2015 which runs 16 to 18 June at ExCeL London. The session is supported by the Bureau of Foreign Trade and the Ministry of Economic Affairs of Taiwan, and will be executed by the Taiwan External Trade Development Council (TAITRA). This dedicated event for security industry experts on 16 June will showcase – for the first time in Europe – the latest innovations from Taiwan Excellence Award-winning Taiwanese companies VIVOTEK Inc., QNAP Systems Inc., EverFocus Electronics Corporation and PLANET Technology Corporation. VIVOTEK Will Display Network Security Cameras – FE8181V & FD8168 Fresh from receiving a 2015 Taiwan Excellence Award from the Ministry of Economic Affairs, VIVOTEK will display two of its leading-edge network security cameras – the FE8181V, a 5 megapixel fish eye network camera, and the FD8168, a 2 megapixel ultra-mini fixed dome network camera. The latest addition to the VIVOTEK portfolio, the new FE8181V is a true day-to-night camera that offers superior image quality 24 hours a day thanks to a removable infrared-cut (IR) filter. Built-in LEDs provide 360 degrees surround illumination up to 10 meters – even in completely dark environments. Vandal-proof IK10 and weather-proof IP66-rated housing make the VIVOTEK FE8181V ideal for coverage of open areas such as airports, sports arenas and retail developments. FD8168 - Ideal For Use In Luxury Developments Launched in April 2015, the compact VIVOTEK FD8168 fixed dome network camera has been specifically designed for indoor applications where both form and function are required. The FD8168’s 2 megapixel sensor outputs 15 frames per second in H.264 compression from compact housing, making it ideal for use in luxury developments where superior image quality should not come at the compromise of discreet design. Simple to install and with a power-over-ethernet (PoE) input design, a single networked fisheye FD8168 fixed dome camera offers the same viewing capabilities as up to four traditional CCTV cameras, but at the fraction of the installation cost. QNAP will exhibit its new Linux-based VS-2200 Pro+ series NVR. The compact 2-bay VS-2200 Pro+ series is packed with functionality and designed to reduce the cost of ownership for SMB and SOHO users. The VS-2200 Pro+ series offers superior performance and advanced surveillance features compared to other entry level NVRs. It is a highly scalable network surveillance system and offers end users a cost-effective way of adapting or expanding their storage capacity based on their long-term recording needs. Compatible With Over 3,000 IP Camera Models An HDMI output allows users to set up and manage the NVR by plugging in a mouse, keyboard, and monitor – with no need for a separate PC – and to remotely monitor multiple cameras, as well as providing the option to play back recordings on a Full HD 1080p local display. Compatible with over 3,000 IP camera models, QNAP has received over 300 orders for the VS-2200 Pro+ and secured a 2015 SecutechExcellence Award since bringing the product to market in April 2015. The latest developments from award-winning Taiwanese companies work to enhance quality while managing costs and driving efficiencies Leading IP-based networking company PLANET will showcase its Z-Wave e-Home Automation Control Gateway. Targeting the IoT, the system is a powerful tool designed to make home networking smarter and safer. Controllable by smart phone or tablet anywhere, anytime, PLANET’s solution uniquely integrates IP-based networking (intercoms, cameras and wireless APs) with Z-Wave Plus (smoke detection, temperature control, door and window) technology. Long Reach PoE Solution PLANET will also exhibit its Long Reach PoE Solution. It is designed to offer a cost-effective way to extend the reach of Ethernet networking and efficiently upgrade analog CCTV to an IP-based surveillance system via existing coaxial cables. TAITRA’s technology showcase will also see EverFocus launch its award-winning ESK1000 Sidekick. Recently crowned the winner of the ‘Tools & Hardware’ category of the SIA New Product Showcase 2015 at ISC West, the ESK1000 is uniquely placed to meet IP camera sidekick demands in a variety of security installation settings. Simple & Cost-Effective Set Up Benefitting from simple and cost-effective set up – with no need for support from a technician – the ESK1000 has revolutionized IP camera installation and testing. Unlike analog systems which use TV outputs and often involve time-consuming testing, installers using the EverFocus ESK1000 can monitor and adjust new and existing camera images remotely by connecting the sidekick to a smart phone or tablet, with no need to contact a central control room. Over 5,000 orders have been placed for the lightweight ESK1000, which is compatible with all major IP cameras and features built-in power-of-ethernet (PoE) and USB outputs allowing the sidekick to charge while completing IP camera installations or tests. Display Eclectic Mix Of Products TAITRA is delighted to be showcasing a selection of Taiwan’s latest technology innovations at IFSEC International. This is all about sharing excellence and best practice in the world of security and safety. The exclusive showcase is set to display an eclectic mix of products as they make their inaugural debut in Europe. The latest developments from award-winning Taiwanese companies VIVOTEK Inc., QNAP Systems Inc., EverFocus Electronics Corporation and PLANET Technology Corporation work to enhance quality while managing costs and driving efficiencies.
MorphoWave biometric access solution captures and matches four fingerprints with a single wave of the hand MorphoWAVE from Safran Morpho took the top honor at the Security Industry Association's 2015 New Product Showcase (NPS), winning the coveted Best New Product Award at the NPS awards ceremony at ISC West on Wednesday. MorphoWave is the market's first biometric access solution featuring high-speed touchless fingerprint matching. MorphoWave captures and matches four fingerprints with a single wave of the hand, for an efficient and comfortable user experience, according to Safran Morpho. Users simply wave a hand over the MorphoWave sensor to be identified. Because the sensor is touchless, the surface remains clean through repeated scans. It reads wet and dry fingerprints without difficulty, which is a supporting factor in its very fast and highly accurate capture and matching rate. SIA's New Product Showcase at ISC West "Each year, the companies competing in SIA's New Product Showcase at ISC West present the leading-edge security solutions that are shaping the industry," said SIA CEO Don Erickson. "These new technologies and solutions are the drivers that are moving the security industry forward, and I congratulate Safran Morpho on their win at this year's NPS." Since its inception in 1979, the NPS has been the security industry's premier awards-based marketing program. This year's NPS Program had 110 entries from 88 companies. In addition, the Judges' Choice Award was presented to IC Realtime for its IC720 360x360 Video Surveillance Camera product. The NPS judges presented awards in 25 product and service categories, and they also presented six honorable mention awards in six categories. The Award Winner’s List appears below, and it also will be posted on the SIA NPS website at http://www.sianps.com. 2015 NPS Award Winners Access Control Devices & Peripherals Cypress Computer Systems / Cypress Integration Solutions OSMIUM Series OSDP Interface Module Access Control Devices & Peripherals Wireless HID Global HID Mobile Access Access Control Software And Controllers IDenticard Access Control PremiSys Security Management Dashboard Convergence And Integrated Software And Solutions Optigo Networks Optigo Integrity Fire/life Safety Xtralis VESDA-E VEA Green / Sustainable Solutions Products MicroPower Technologies SOLVEIL Surveillance System Hosted Solutions CheckVideo HD Analytics Gateway Intrusion Detection And Prevention Solutions Bosch Security Systems, Inc. G Series Control Panel Intrusion Detection And Prevention Solutions Wireless Interlogix ZeroWire Locks/Safes/Hardware KT&C KEES Mobile Apps Honeywell Security Products Americas MAXPRO Mobile App Network Support Solutions Phybridge CLEER (Coax Leveraged Ethernet Extended Reach) Switch Outdoor Perimeter Protection Knightscope, Inc. K5 Autonomous Data Machine Residential And Monitoring Solutions NETGEAR ARLO Tools And Hardware EverFocus Electronics Corp. Sidekick User Authentication, Identification, Credentialing And Management Zwipe Zwipe Access Video Analytics NICE Systems NICE Suspect Search Video Surveillance Advanced Imaging Technologies Axis Communications Axis’ Zipstream technology Video Surveillance Cameras HD (Megapixel) HauteSpot Networks Corporation HiveCAM Video Surveillance Cameras IP Samsung Techwin Open Platform Video Surveillance Data Storage DDN Storage DDN - GS7K Appliance Video Surveillance Hardware And Accessories Dotworkz Systems BASH All-Pro Video Surveillance Management Systems Spectra Logic NVR3 Video Management Solutions
The Security Behind Financial SecurityDownload
Nine Ways To Make Your Retail Security System Work HarderDownload
Financial Institutions Require Future-Ready Physical Security TechnologiesDownload
Dahua Technology’s Safe City Solution Chosen By The Local Government To Make Brienon-sur-Armançon Safer
- Dahua Technology’s Safe City Solution Chosen By The Local Government To Make Brienon-sur-Armançon Safer
- Airbus’ STYRIS, Vessel Traffic Services Upgrades The Port Of Sydney
- March Networks’ Video Solution Used At Quik-E C-Store To Protect Profits And Recoup Losses
- Rasilient Completes Phase II Of The Video Surveillance System Upgrade At Fairbanks International Airport