Browse Switchers & Switches

Switchers & Switches - Expert commentary

Will Network Requirements Help You Build Your Business Or Put You Out Of Business?
Will Network Requirements Help You Build Your Business Or Put You Out Of Business?

Once upon a time, providers had end-to-end control when deploying a physical security platform, which is not the case anymore when we consider the modernization to IP. When considering the move to IP physical security, the provider needs to ensure the customer has a robust PoE backbone to connect the IP security device back to the application. Network readiness requirements have complicated IP security deployments, making it challenging for current providers while opening the door to new competitors. Competition is increasing Network providers see the move to IP as an opportunity to expand their wallet share. As the trusted advisors to IT teams, network providers leverage their position to win over the physical security business. As the time, cost, and complexity increases to move a customer to IP; providers need to expand their offering, considering the decline in endpoint revenue margins (the "race to the bottom"). Unfortunately, PoE networks are becoming increasingly complex as IoT endpoints are continually introduced to the network. Before the IP/IoT deployment can occur, the network provider (now your competition as well) will have the opportunity to edge you out and offer an IP/IoT solution with the network. The traditional approach is outdated They have standardized this cookie-cutter solution that may work for some, but not for all While we accept that we are collectively relying on our networks to support an increasing number of devices and applications, many have not considered the local area network's evolution. Organizations no longer only connect data terminals and printers to the network - they connect all manner of intelligent devices, including Wi-Fi access points, cameras, phones, access control, lighting, intercoms, and more. Many traditionalists will recommend the rip-and-replace of existing infrastructure while layering all IoT devices on the same network. They have standardized this cookie-cutter solution that may work for some, but not for all. What if there was a better way? Create the best outcome for you and your customer Let's start by thinking about the customer's desired outcome. The customer wants new capabilities within an acceptable ROI. Given the complications surrounding COVID-19, these organizations may require solutions very quickly to operate safely and within governmental guidelines. However, these organizations first need to establish a LAN framework without high costs, disruption to business, or complexity. They do not want to compromise network security or their business. They do not want network requirements to account for the majority of their budget as there is no ROI in infrastructure. The infrastructure supports the ROI gained from the devices and applications it enables. How do we provide a network solution that addresses both the customer and the provider's needs? Customers need a network that: Eliminates competitive pressures, giving providers end-to-end control over the network and the entire digital transformation experience. Shorten sales and deployment cycles to simplify network readiness and reduce the budget allocation towards infrastructure. Focus on device and application implementation and adoption to improve the customer's ROI. Build a physically separate PoE backbone for IP/IoT applications to maximize network security and performance while simplifying ongoing management. Eliminate the dependency on other providers. Advice from Albert Einstein We cannot solve a problem using the same kind of thinking we used when we created it" To help achieve these outcomes, I encourage you to accept some advice from Albert Einstein. Einstein once said, "The only thing that interferes with my learning is my education." Sometimes we are unwilling to accept new ideas because of preconceived notions about how things "ought to be done." We must embrace innovation and challenge our best practices that are based on past education. Einstein also said, "We cannot solve a problem using the same kind of thinking we used when we created it." Sometimes we must challenge ourselves to think differently by using innovations to create better outcomes for our businesses and customers. Consider this for a second: are you focused on the problem rather than finding a unique alternative solution? Einstein defined insanity as "doing the same thing over and over and expecting different results." Your customers are all unique with different digital transformation challenges and objectives. The cookie-cutter, rip-and-replace method has not worked for all. If it did, every organization would have all the IP and IoT solutions they need. It's time to consider a fresh new approach that may challenge your education. Don't let our education get in the way of your learning! Looking to innovation and modern solutions The idea of The Modern LAN, introduced by Frost & Sullivan, aims to present a paradigm shift in LAN design for IP and the IoT. The whitepaper, available for free using the link above, offers an enhancement to traditional LAN design to address IP and IoT devices' specific needs. Today, we connect more than just data terminals, and we must design our networks accordingly. Instead of starting with the network, Modern LAN design suggests starting with the endpoint requirements and building a network to address these considerations. One of the foundations of Modern LAN design is to consider all networking innovations available. NVT Phybridge PoE innovations allow you to leverage different cable types, including coax, single-pair UTP, and multi-pair UTP cabling, to enable IoT devices at much greater distances than traditional switches. Aligned with Modern LAN design, you can transform the existing network into a robust and secure PoE backbone instead of removing and replacing the reliable infrastructure. PoE switch solutions PoE switch solutions leverage different core technology that vary in capability and effectiveness I know what you may be thinking: Am I compromising on network performance by leveraging these innovations? The answer is: it depends on the technology. PoE switch solutions leverage different core technology (Homeplug, VDSL, ADSL, Ethernet, etc.) that vary in capability and effectiveness. For more than 15 years, NVT Phybridge has been a global pioneer in long-reach PoE technology. We were the first company to develop a switch that delivered Ethernet and PoE over a single pair of UTP wire with up to 1,200ft (365m) reach, which is four times the reach of standard switches. We have spent the last 15 years surprising the industry with our capabilities and satisfying customers with our technology. Performance is paramount We understand that innovation is met with scrutiny and skepticism. We also know that some companies make claims that they cannot back up, which can sometimes shed a negative light on an entire industry or product category. However, our enterprise-grade networking solutions have helped thousands of customers modernize to the next generation of intelligent devices without high costs, complexity, or disruption to their business. For example, our CLEER24 switch is a 24-port Ethernet over Coax innovation that delivers Ethernet and PoE+ over a single coax cable with up to 6,000ft (1,830m) reach, which is 18-times the reach of a standard switch.  Transform network readiness requirements into an opportunity to grow your business! Be a thought leader, leverage Modern LAN design, and introduce NVT Phybridge PoE innovations to your customers. It's time to change the conversation around LAN design and improve the outcome for you and your customers.

Will Network Requirements Help You Build Your Business Or Put You Out Of Business?
Will Network Requirements Help You Build Your Business Or Put You Out Of Business?

Once upon a time, providers had end-to-end control when deploying a physical security platform, which is not the case anymore when we consider the modernization to IP. When considering the move to IP physical security, the provider needs to ensure the customer has a robust PoE backbone to connect the IP security device back to the application. Network readiness requirements have complicated IP security deployments, making it challenging for current providers while opening the door to new competitors. Competition is increasing Network providers see the move to IP as an opportunity to expand their wallet share. As the trusted advisors to IT teams, network providers leverage their position to win over the physical security business. As the time, cost, and complexity increases to move a customer to IP; providers need to expand their offering, considering the decline in endpoint revenue margins (the "race to the bottom"). Unfortunately, PoE networks are becoming increasingly complex as IoT endpoints are continually introduced to the network. Before the IP/IoT deployment can occur, the network provider (now your competition as well) will have the opportunity to edge you out and offer an IP/IoT solution with the network. The traditional approach is outdated They have standardized this cookie-cutter solution that may work for some, but not for all While we accept that we are collectively relying on our networks to support an increasing number of devices and applications, many have not considered the local area network's evolution. Organizations no longer only connect data terminals and printers to the network - they connect all manner of intelligent devices, including Wi-Fi access points, cameras, phones, access control, lighting, intercoms, and more. Many traditionalists will recommend the rip-and-replace of existing infrastructure while layering all IoT devices on the same network. They have standardized this cookie-cutter solution that may work for some, but not for all. What if there was a better way? Create the best outcome for you and your customer Let's start by thinking about the customer's desired outcome. The customer wants new capabilities within an acceptable ROI. Given the complications surrounding COVID-19, these organizations may require solutions very quickly to operate safely and within governmental guidelines. However, these organizations first need to establish a LAN framework without high costs, disruption to business, or complexity. They do not want to compromise network security or their business. They do not want network requirements to account for the majority of their budget as there is no ROI in infrastructure. The infrastructure supports the ROI gained from the devices and applications it enables. How do we provide a network solution that addresses both the customer and the provider's needs? Customers need a network that: Eliminates competitive pressures, giving providers end-to-end control over the network and the entire digital transformation experience. Shorten sales and deployment cycles to simplify network readiness and reduce the budget allocation towards infrastructure. Focus on device and application implementation and adoption to improve the customer's ROI. Build a physically separate PoE backbone for IP/IoT applications to maximize network security and performance while simplifying ongoing management. Eliminate the dependency on other providers. Advice from Albert Einstein We cannot solve a problem using the same kind of thinking we used when we created it" To help achieve these outcomes, I encourage you to accept some advice from Albert Einstein. Einstein once said, "The only thing that interferes with my learning is my education." Sometimes we are unwilling to accept new ideas because of preconceived notions about how things "ought to be done." We must embrace innovation and challenge our best practices that are based on past education. Einstein also said, "We cannot solve a problem using the same kind of thinking we used when we created it." Sometimes we must challenge ourselves to think differently by using innovations to create better outcomes for our businesses and customers. Consider this for a second: are you focused on the problem rather than finding a unique alternative solution? Einstein defined insanity as "doing the same thing over and over and expecting different results." Your customers are all unique with different digital transformation challenges and objectives. The cookie-cutter, rip-and-replace method has not worked for all. If it did, every organization would have all the IP and IoT solutions they need. It's time to consider a fresh new approach that may challenge your education. Don't let our education get in the way of your learning! Looking to innovation and modern solutions The idea of The Modern LAN, introduced by Frost & Sullivan, aims to present a paradigm shift in LAN design for IP and the IoT. The whitepaper, available for free using the link above, offers an enhancement to traditional LAN design to address IP and IoT devices' specific needs. Today, we connect more than just data terminals, and we must design our networks accordingly. Instead of starting with the network, Modern LAN design suggests starting with the endpoint requirements and building a network to address these considerations. One of the foundations of Modern LAN design is to consider all networking innovations available. NVT Phybridge PoE innovations allow you to leverage different cable types, including coax, single-pair UTP, and multi-pair UTP cabling, to enable IoT devices at much greater distances than traditional switches. Aligned with Modern LAN design, you can transform the existing network into a robust and secure PoE backbone instead of removing and replacing the reliable infrastructure. PoE switch solutions PoE switch solutions leverage different core technology that vary in capability and effectiveness I know what you may be thinking: Am I compromising on network performance by leveraging these innovations? The answer is: it depends on the technology. PoE switch solutions leverage different core technology (Homeplug, VDSL, ADSL, Ethernet, etc.) that vary in capability and effectiveness. For more than 15 years, NVT Phybridge has been a global pioneer in long-reach PoE technology. We were the first company to develop a switch that delivered Ethernet and PoE over a single pair of UTP wire with up to 1,200ft (365m) reach, which is four times the reach of standard switches. We have spent the last 15 years surprising the industry with our capabilities and satisfying customers with our technology. Performance is paramount We understand that innovation is met with scrutiny and skepticism. We also know that some companies make claims that they cannot back up, which can sometimes shed a negative light on an entire industry or product category. However, our enterprise-grade networking solutions have helped thousands of customers modernize to the next generation of intelligent devices without high costs, complexity, or disruption to their business. For example, our CLEER24 switch is a 24-port Ethernet over Coax innovation that delivers Ethernet and PoE+ over a single coax cable with up to 6,000ft (1,830m) reach, which is 18-times the reach of a standard switch.  Transform network readiness requirements into an opportunity to grow your business! Be a thought leader, leverage Modern LAN design, and introduce NVT Phybridge PoE innovations to your customers. It's time to change the conversation around LAN design and improve the outcome for you and your customers.

Surge Protection For Security Installations: 2017 Saw Increased Investment
Surge Protection For Security Installations: 2017 Saw Increased Investment

In 2017, DITEK saw how power surges from the many natural disasters that took place damaged many businesses. In a natural disaster, or even everyday business operations, a facility’s entire investment in security, life safety and surveillance systems technology can be disabled or rendered useless in a few seconds. Surge protection solutions can mitigate those risks and protect security investments. Proactive Approach To Risk Mitigation Throughout 2017, we also witnessed a change in how enterprises view surge protection, which included how investments are being made in surge protection to protect valuable security, life safety and surveillance systems, while also reducing downtime, manpower costs, liability vulnerabilities, and possibly compliance issues that can force businesses to actually cease operations. Effective security management is about mitigating risks. But risks cannot be mitigated without a proactive approach. Enterprises and integrators, who take the time to assess risk and to develop a strategy to incorporate effective detection, deter and response criteria to protect physical assets will be successful in 2018. 2018 And Beyond That strategy includes designing surge protection into new security systems, while also adding surge protection to existing systems. Enterprises and security integrators who implement a surge protection strategy during security planning processes – or after – will be exercising prevention and mitigation, and they will be successful in 2018 and beyond.  Surge protection devices have an untapped potential for enterprise surveillance and security systems In 2017, Ditek continued to offer security end users a solid surge protection solution. We also successfully educated system integrators, who are seeking value-added products or services to incorporate into their portfolios, on the importance of surge protection devices. Educating Security Integrators We believe that surge protection devices have an untapped potential for enterprise video surveillance and security systems, because they can and do meet safety and security challenges that have been rarely identified in the past. We are looking forward to 2018, when we will continue to develop new surge protection products – including a new product engineered to protect up to twelve individual fuel dispensers, which is critical to the financial operation of convenience stores. We will also continue to educate security integrators about the importance of including surge protection in the design/build RFP, to not only secure an enterprise’s valuable security equipment, but also to help integrators to differentiate their capabilities and knowledge from the competition.

Latest GJD Ltd news

Revader Security Forms A Strategic Partnership With Dynamic CCTV To Promote Their Products Across The UK
Revader Security Forms A Strategic Partnership With Dynamic CCTV To Promote Their Products Across The UK

Revader Security has agreed a strategic partnership with Dynamic CCTV, a trade supplier of professional CCTV to the security industry. Revader Security’s range of products include Transit rapid redeployable cameras which are straightforward to install in virtually any location and can be rapidly repositioned to respond to changing security demands. Powered by battery or mains, footage can be viewed and downloaded over wireless and mobile networks. Remote monitoring solutions The company also produces a range of mobile power solutions (PowerPaks) and a range of accessories to interface with the redeployable CCTV products. Revader Security has also developed a range of diesel and battery powered rapid deployment CCTV towers which are proving increasingly popular with end users and the security trade as a rental opportunity. Dynamic CCTV will promote, supply and support Revader Security’s range of products As complete surveillance, recording and remote monitoring solutions, they are ideal for deployment into situations where little or no existing infrastructure is present. Dynamic CCTV will promote, supply and support Revader Security’s range of products with trade customers across the UK, drawing on over 25 years’ experience in the marketplace as one of the suppliers of CCTV to the security industry. Digital recording systems Dynamic CCTV is a Hikvision UK authorized distributor, providing the latest innovative CCTV equipment at very competitive pricing - including Digital Recording Systems, IP Cameras and CCTV monitoring equipment, along with products from other manufacturers such as TP-Link, GJD, Iiyama, TOA, Ubiquiti and Veracity. Stuart Caldecourt, Managing Director at Revader Security commented: “We are delighted to be partnering with Dynamic CCTV, who have an outstanding track record in the supply of professional CCTV products across the UK – and an impressive engineering and support capability proven over many years.”

Jason Hill Appointed as GJD’s New Commercial Director
Jason Hill Appointed as GJD’s New Commercial Director

GJD has hit the ground running in 2019 with the appointment of Jason Hill as the company’s Commercial Director. Mark Tibbenham, Managing Director of GJD has big plans for the British manufacturer of external motion detectors and LED illuminators, and has recruited Jason Hill to help deliver on his aspirations. GJD Expands In The US Commenting on the new appointment, Mark said: “Even though we were 2017 recipients of the Queens Award for Enterprise, International Trade there are a significant number of markets where we have no representation and Jason can help us identify suitable distributors and partners globally. We are also expanding in the US after opening an office in Los Angeles last year and focusing on the Home Automation market there, Jason is extremely well connected with that sector in North America.” Most importantly GJD has ambitious new product development plans and we need to communicate those effectively to a large potential market" Mark continued to say: “Most importantly GJD has ambitious new product development plans and we need to communicate those effectively to a large potential market. Having worked with Jason over the last few years on a number of projects and partnerships, I felt he was the man we needed to take our business to the next phase.” Home Automation Platforms Jason Hill commented: “It is very satisfying to be working for a British security manufacturer after all these years in the industry. GJD is growing fast and is already recognized as a UK export success story, but there is still so much more potential. I will be busy traveling the world to meet new partners and supporting the US operation as it expands. Mark has already done the hard work of enabling support of GJD products into home automation platforms, so I need to work on market awareness. Reliable human detection in external applications is in huge demand from end users and we have the technology to deliver that, I have also seen the product roadmap for the next two years and there are some great projects on the horizon.” Jason joins GJD from Taiwanese surveillance manufacturer LILIN, where he was UK MD for 20 years and latterly Group Vice President. He has worked in the Security industry since 1990 predominantly with Manufacturers. Founded in 1983, GJD is the UK’s renowned manufacturer, designer and supplier of professional external detector equipment, as well as Infra-Red and White-Light LED illuminators. GJD’s Head Office is based in Heywood, Greater Manchester, UK.

GJD's IP Drivers Are Officially Control4 Certified Making Integration Easy And Seamless
GJD's IP Drivers Are Officially Control4 Certified Making Integration Easy And Seamless

GJD, a UK manufacturer, designer and supplier of professional external detector equipment, as well as Infra-Red and White-Light LED illuminators is proud to announce that its IP drivers are officially Control4 certified. The certification means GJD’s IP devices are Control4 ready straight out of the box, further enhancing GJD’s commitment to the Custom Install industry. The drivers are listed on the Control4, Janus Technology and GJD websites. All certified drivers must pass stringent testing in Control4 labs, ensuring smooth and seamless integration. GJD’s certification includes the incorporation of Simple Device Discovery Protocol (SDDP), which makes integrating GJD IP devices with a Control4 system easy and seamless. Passive Infrared Detectors Mark Tibbenham, GJD’s Managing Director commented: “We are extremely proud that our IP drivers are C4 certified. GJD is fully committed to providing Custom Integrators with all of the benefits of a truly customizable network-based security system. Our partnership will make it even easier for CI’s to install and configure GJD into Control4 home and commercial automation projects”. GJD offers a wide variety of IP devices ranging from external passive infrared detectors and highly accurate laser sensors for perimeter protection GJD offers a wide variety of IP devices ranging from external passive infrared detectors and highly accurate laser sensors for perimeter protection and intruder detection, to Infra-Red and White-Light LED illuminators for intelligent lighting. There is also a certified driver for the company’s IPAnything Module, which is an I/O Converter, designed to convert any type of analog sensor to an IP system, or vice versa. Personalized Automation GJD’s professional IP technology provides transformative benefits including early intruder warning alerts to provide an alarm when the intruder is at the boundary, rather than alerting the user when the threat is already inside the building. More unique benefits include utilizing detectors to measure outdoor light level and ambient temperature, which optimize environmental control. Overall an integrated GJD and Control4 system provides convenience, peace of mind and extremely reliable security detection to create a comfortable and safe environment for the user. Founded in 2003, Control4 is a provider of personalized automation and control solutions, which allows the user to control virtually any device in a home or business automatically. Control4 provides an affordable way to control and automate security, lighting, energy and music in a single room or throughout the entire home. The partnership between GJD and Control4 will bring even more versatile smart solutions for home and commercial projects.