Everfocus Video Surveillance Camera Lenses
Sorry no products match your search. Your search criteria may have been too narrow. If you remove some of your search criteria, this may yield more productive results.
Browse Video Surveillance Camera Lenses
Security camera lens products updated recently
According to IHS Market, it is estimated that there are over 60 million security cameras in the United States, and other reports say these cameras capture more than four billion hours of footage per week. Over the last decade, IP camera technology has dominated the conversation as it has provided users with a broad offering of enhanced image quality and features. With a large percentage of existing security systems relying on analog, many end users looking for high definition (HD) video quality have been forced to take on a complete system overhaul. Infrastructure Overhaul For HD Video To make the switch, customers would need to change everything, from cameras to hardware to wiring– not to mention the lengthy installation process that would ensue. IP cameras also require higher Internet speeds and more cloud space. Whether constrained by budget, bandwidth or storage, many end users have been unable to adopt this new video surveillance method.Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike. By utilising the current Coaxial cables, this offering yields high definition video, while requiring minimal infrastructure changes and is an optimal surveillance choice for security customers. Plus, with new advancements and updates being made frequently to this technology, there is a solution for every security need. The enhanced alternative of HD over Coax has been warmly welcomed in the security industry, thanks to its simple solutions and ever-evolving features. Many new analog HD cameras are “plug and play,” able to connect directly to existing Coaxial cables. This eliminates the need for a complete system change, creating cost-savings for the end user and an enhanced video quality offering. Easy Solutions For HD Video As a result, integrators can cost-effectively upgrade their customer’s surveillance solution while using their legacy infrastructure, making it an attractive option for end users and an easy sell for dealers. Latency in video is another common issue with network-based camera systems, where even the slightest delay in video surveillance can hinder security response HD over Coax cameras themselves are always expanding and evolving to meet a wide array of security needs. With the introduction of fisheye and multi-sensor cameras, users now have a multitude of coverage options, not to mention the introduction of 4K bringing resolution options to the same level as IP. Some newer technologies are even touting 4K cameras paired with 4K digital video recorders (DVRs) made specifically for analog systems. Longer cables grant transmission for up to 1600 feet, double the distance of standard analog solutions, and triple that of IP systems. This single cable is able to transmit both HD video and audio. Recently, broadcast quality audio over Coax has become available in limited models, a substantial improvement over older analog technology, which was unable to transmit audio. Stopping Video Delay Latency in video is another common issue with network-based camera systems. Even the slightest delay in video surveillance can hinder security response. IP cameras are forced to compress and packetize their video for transmission. The outcome of this is a reduced number of images per video, which in turn causes delay. HD over Coax on the other hand, delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity. Additionally, the point-to-point transmission delivers uncompressed video free of lag. Another touted benefit is that, unlike IP networked cameras, analog systems provide a more secure video transmission. With so much sensitive information housed on a businesses’ network, adding another point of network access through an IP camera can create concerns for cyber security risks. HD over Coax delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity Preventing Network Hacking With HD over Coax, the physical connections between the camera and DVR prevent network hacking. By keeping the video surveillance system offline, security professionals are able to direct their attention to the physical threats at hand, rather than having to focus on deterring cyber security risks. One of the primary difficulties of deploying HD video solutions is the fact that many older systems utilize a wide variety of HD standards and platforms. To make matters more complicated, after HD over Coax was brought to market, manufacturers raced to create their own version of this technology. Today, the most popular proprietary standards are HD-CVI, HD-TVI and AHD. However, integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible.Integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible Diversifying Surveillance Through One DVR To combat these issues, manufacturers have introduced products with more flexibility to their portfolios. One example of this is the penta-brid DVR which grants the ability to seamlessly integrate multiple technologies deployed across one application. This means that systems with diverse camera brands and technologies, such as a mix of HD-CVI, HD-TVI, AHD, analog or IP, can be connected through one DVR. For many end users with legacy analog systems, penta-brid DVRs give them greater freedom to choose between a variety of solutions, rather than being limited to one option. With video resolution increasing, the space needed to store the footage is similarly rising. Penta-brid technology has been able to adapt to these evolving needs, giving users ample storage space to house the HD and 4K surveillance video with some of the newest models including H.265 compression. HD Casino Surveillance Made Simple For casinos, HD images are critical for identifying unauthorized personnel and unlawful behaviours to create a safe environment for guests and staff While HD over Coax is beneficial to many end users and integrators, those in the casino and hospitality markets find it crucial. With a combination of high profile guests, large amounts of cash on hand, constant crowds and strict industry regulations, reliable video surveillance is a must. Deploying new IP systems comes at a stiff price. When looking to upgrade their video surveillance, casinos must also be mindful of the installation process. When moving to an IP-based system, ripping out old wires and replacing them with new is the standard practice. This practice can be both disruptive and costly, not to mention gaming regulations require casino activities be monitored at all times so a complete system shutdown would result in revenue loss. This cost can be hard to justify, especially when the current legacy analog system remains in working condition with only the lower image resolution to date it. For these scenarios, the most cost-effective option is to leverage the legacy infrastructure, replace the existing cameras with new devices, and reap the benefits that HD video has to offer without any lapse in security. For casinos, HD images are critical for identifying unauthorized personnel and unlawful behaviours to create a safe environment for guests and staff. HD over Coax cameras now offer the same resolution as IP cameras with a plug and play approach, that cuts down on expense without sacrificing quality. For businesses and applications that are unable to adopt IP technology, whether it be cost or time prohibitive, HD over Coax now features most of the same benefits IP has to offer without breaking the bank. By providing clear images in real time, maximizing existing infrastructure, and affording cyber security benefits, HD over Coax provides an attractive solution for many end users and integrators.
When people think of control rooms, images from James Bond movies or intense action stories come to mind. What they fail to realise is the incredible level of ergonomics, technology, precision and craftsmanship required to create a top-notch command and control room. “These are rooms of complex functionalities, where hundreds of elements must be integrated and function in sync,” says Jim Coleman, National Sales Manager, AFC Industries. Professional teams from several different industries must coordinate every single detail in order to ensure that functionality occurs each and every time. Reconfigurable Furniture For Control Rooms AFC Industries is one company that specialises in equipping control rooms for security and other applications. AFC Industries was established in 1994 as a family-owned business that focuses on the design and construction of ergonomic products. Their height-adjustable units guarantee the right height for standing desks as well as traditional sitting levels. The company produces an array of Command and Control ergonomic security consoles and mounting solutions. Modular racking systems facilitate efficient storage of electronic and audio-visual equipment. As technology changes, older traditional consoles are no longer a necessity. Many organizations instead are choosing to use lighter, less costly, reconfigurable furniture that allows more flexibility. Command Centers need to be able to reconfigure the space at will. Because most systems are housed in secure data centers, users should be able to quickly move their positions by relocating their workstations, utilising different network connections. Simple control room features, like those addressing lighting or operator comfort, can make the difference in a correct or incorrect decision during a crisis Emergency Operations Centers A positive trend driving the market for control rooms is an increase in emergency operations centers (EOCs), says Randy Smith, President of Winsted. “Everybody is concerned about what happens in an emergency,” says Smith, and the centers are popping up as a tool for emergency preparedness. It’s another environment where sit-stand work stations are the rule. Winsted’s product lines include stock modular and customized elements in good-better-best categories – from basic to lots of “bells and whistles;” jobs can be configured from modular elements or customized as needed. Customized Control Rooms For Seamless Operation There is a lot at stake in control room design: Lives can depend on how effectively a control room functions in an emergency. Control rooms should seamlessly accommodate both everyday occurrences and crisis situations, says Matko Papic, Chief Technology Officer of Evans Consoles. Better-operating control rooms can increase efficiency and reduce and/or mitigate risk. Simple control room features, like those addressing lighting or operator comfort, can make the difference in a correct or incorrect decision during a crisis. Addressing operator comfort can reduce the possibility of workers’ compensation claims. End users are seeing multiple benefits of creating a better operating environment, better sightlines, more comfort and attention to ergonomics. As a fully integrated control room solutions provider, Evans Consoles approaches the needs of a control room environment beginning in the conceptual/operational planning stage. They consider broad issues such as how information will be processed, the interface between technology and operators, and the cognitive and physical interactions of operators – understanding that these factors drive the layout and function of control rooms. After analyzing tasks to be performed in the environment, Evans lays out the consoles to meet those needs. Rather than a predesigned solution, each installation is tailored around a specific application. Read part 2 of our Control Rooms series here
Many end-users shell out the cash to acquire the newest high-end devices, plug in, and expect to be wowed A well-developed surveillance system can give a single security guard the power to see what otherwise might take a hundred pairs of eyes to see. But what happens when all the components are all connected and powered up, and the resulting image on the screen is, well, indiscernible, or, at the very least, terribly pixelated? Many end-users shell out the cash to acquire the newest high-end devices, plug in, and expect to be wowed. Often enough, however, what they see on the screen is not what they were expecting – and they wonder what they just paid for. In a good high-definition system, what factors actually create the best image quality? With so many variables involved, from the camera’s lens to the imaging algorithms to the monitor resolution – just to name the obvious ones – how do system integrators achieve the best on-screen images? The Lens The first component to handle light from an object, this may be the one most taken for granted in cameras of any sort. (Just try scratching or cracking one and you’ll agree.) In the days of analog cameras, it seemed that any old lens would do just fine. However, as the technology inside cameras evolved and more powerful sensors (more pixels) became available, engineers and programmers demanded more from lenses. Moreover, intelligent video content analyses would be impossible without high-accuracy lenses.In what way do lenses impact the image quality? The key factor here is light transmission. The quality of light passing through the lens itself will forever be critical to the quality of image reproduced. A lens made using ultra-precision molding aspherical technology achieves more accurate color, better light, and clearer images. Multilayer broadband anti-reflection coating further maximises a lens's light transmission while minimizing the residual reflection of light on the surface of each optical lens. Variables involved include the camera’s lens, the imaging algorithms and the monitor resolution When it comes to fabricating a megapixel lens that hits the mark, the materials used and the processes by which lenses are produced are the two most critical criteria. The materials most often used to create lenses are glass and specialized plastics. An HD lens made of ultra-low-dispersion optical glass – which, by using dispersion characteristics that are different from those of conventional optical glass – will deliver better HD performance. Machine-automated lens production using specialized plastics results in high output for camera producers, and the lenses produced are more uniform in design and quality. For an HD vari-focal lens, its image quality depends largely on the precision of the cam. The cam rotates to drive the zoom and focus lens groups forward and backward for a smooth continuity of focal length and adjustment of the focal point. A lack of precision with the cam inevitably causes an offset or tilt of the lens' optical axis during zooming and focusing, leading to a serious loss of image quality. Lens production is a delicate balancing act. The slightest errors or imperfections will be very noticeable when tested Lens production is a delicate balancing act. The slightest errors or imperfections will be very noticeable when tested. The features of a lens that affect image resolution, clarity, and contrast must be perfect. Achieving uniformity of image resolution at the center and the edges of a lens requires high-precision machinery. And once a lens has been properly crafted, the assembly of the camera, the lens housing materials, and the alignment of the optical axis demand utmost accuracy. To put it mildly, quality control must be rigorous. Image Signal Processing As light passes through the lens, the sensor captures it and converts it to data. Raw RGB data is transmitted by the camera sensor and undergoes Image Signal Processing (ISP) such as noise reduction, white balance, WDR, curve correction and color correction, etc. The data is then transformed to true colors for each pixel point, for people to see images that look “normal” to the human eye. It is the Image Signal Processing that defines the final image quality on the screen. Collecting data in different conditions is vital, for instance, outdoor data should be analyzed with natural light on days with sun, overcast, rain, and fog, at dawn, at dusk, and so on. Similarly, when using cameras equipped with infrared sensors, testing the IR light signals in various conditions is necessary as well. Actual image performance depends upon variables such as low light illumination, signal to noise ratio, dynamic range of light, and more. ISP algorithms aim at increasing the signal data and decreasing noise. Cameras with Wide Dynamic Range (WDR) will yield improved video imaging with both background and foreground objects in high contrast or high-backlight environments, maximising the amount of detail in brighter and darker areas in one field-of-view. In scenes with low contrast and low light, the sensors deliver digital image signals and at the same time send some amount of digital noise that directly hinders image clarity. Three-dimensional digital noise reduction (3D DNR) removes unwanted artifacts from an image, reducing graininess. Where cloudy weather poses a challenge, auto-defogging technology helps to identify the density of fog or rain with gray-white color ratio analysis, and imbues images with true color reproduction. Ramping up the megapixels and frame rates yields great video, but also results in more bandwidth used and more storage occupied Matching Megapixels To Image Quality When the factors mentioned above line up well, correlating cameras and monitors creates the best viewing experience. When a high definition camera is in place, a monitor with a high resolution will display images much more clearly. But if the monitor’s resolution is low, it will not deliver the high-quality images expected – or possible – from that HD camera. For an 8 MP camera, for instance, users do best to apply monitors with 4K × 2K resolution. Though common sense, this deserves to be mentioned because users might decide to upgrade their systems with 4K monitors, but with perhaps 1.3 MP cameras installed. In such a scenario, there’s no guarantee the on-screen image quality will automatically improve. Managing Data And Bandwidth In terms of a complete, high definition surveillance system, when the right factors come together and the calibrations are set, image quality – even in a standard HD 1080p setup – can be extremely good. The final piece of the puzzle is managing the data. Ramping up the megapixels and frame rates yields great video, but also results in more bandwidth used and more storage occupied. Squeezing bandwidth threatens image quality and clarity, but keeping ample room for signal transmission and storage will eventually increase the overall cost for customers. Is it possible for integrators to optimize their customer’s system and, at the same time, stay within budget constraints? Luckily, it can be done. Squeezing bandwidth threatens image quality and clarity, but keeping ample room for signal transmission and storage increases the overall cost for customers To do this, a more efficient video encoding solution would allow an improvement in compression efficiency of 40–50% over H.264. Improvements to algorithms that are adaptive to a particular scene give users control over bitrate. Another option would be to start recording video only when an event triggers an alarm, since most security guards are primarily concerned with moving objects rather than a scene’s generally stagnant background. This intelligently helps optimize bandwidth and storage consumption. Another method is to use a single panoramic or fisheye camera in place of several HD cameras for coverage – the reduced number of security devices will reduce bandwidth demands and the rate of storage consumption as well. Getting The Best Image Quality Now let’s put this all together. Naturally, integrators and users will refer to their product specs to understand features and functions, fine-tuning each component for best results. Also, as suggested above, users should select an HD camera comprehensively in terms of lens performance, pixels, image quality, and overall system compatibility and performance. Next, matching the backend device and management platform should be carefully considered in a complete security system. Installing equipment that has been engineered for a given scene is a must, along with strategising how to get the most coverage out of the lowest number of cameras. Finally, product quality, warranty, price, and on-going customer service are all important factors that customers should take into account as well.
EverFocus, GeoVision, PLANET and VIVOTEK—were the highlights of a press conference at ISC West 2018, organized by the Taiwan External Trade Development Council (TAITRA), Taiwan’s foremost trade promotion organization. These breakthrough products, with potential to transform the global security market, include a futuristic Virtual Reality 720° camera, a facial recognition dome camera, a cutting-edge Internet of Vehicle (IoV) fleet surveillance system, an IP camera armed with anti-intrusion software, and a next-gen intuitive colour touch LCD switch.We are proud to showcase Taiwan’s finest at one of the United States’ most prestigious security tradeshows" Extensive Engagements “Today, the United States and Taiwan enjoy an ever-expanding relationship and extensive engagement in many fields, especially in electronic security." "Our products launch event unveil some of Silicon Island’s most cutting-edge products and technologies in the areas of IoT and Internet of Vehicles (IoV), unmanned security and cyber + physical integration." "We are proud to showcase Taiwan’s finest at one of the United States’ most prestigious security tradeshows and look forward to having participants experience the future of security,” said TAITRA Executive Director Simon Lai. These Taiwanese ICT companies, all winners of the Taiwan Excellence Awards, generated a lot of excitement and buzz with the unveiling of their new products at the conference. XFleet Management Platform EverFocus demonstrated its engineering and research prowess as Regional Technical Sales Manager Marques Phillips unveiled details of the company’s XFleet Management Platform which he described as not only transforming the IoV experience, but the future of vehicle fleet management. The new solution allows users to easily track, monitor and manage any type of fleet vehicles on a Web browser anywhere and anytime. With Xfleet, users can not only reduce overall costs by effectively utilizing resources such as vehicles, fuel, and manpower, but also improve management efficiency and business performance by keeping and analysing the historical records of the vehicle data as needed.GeoVision cameras can recognize human faces in 1.5 seconds, making possible identification of authorized versus un-authorized personnel Virtual Reality Camera GeoVision showed off the VR 360, the world’s first Virtual Reality camera that can provide a 720° view. President David Huang said it’s the only camera with two Fisheye lenses to provide a floor to ceiling, 720° view with no blind spots. It’s ideal for security environments such as airports, train stations, city streets, harbors and highways. The camera uses advanced computer vision technology to simulate a three-dimensional, highly realistic, and practical 3D space. It’s water-proof, vandal-proof and dust resistant, making it ideal for outdoors. It also boasts IR Night Mode for clear images even in dark environments. Huang also demonstrated new facial recognition IP dome camera with cutting-edge AI. It can recognize human faces in 1.5 seconds, making possible identification of authorized versus un-authorized personnel, creation of blacklists for restricted personnel, and VIP lists to improve relationship management. Intruitive Touch LCD Switch PLANET explained how the Intuitive Touch LCD Switch makes it possible to easily manage powered devices in real time, greatly enhancing network management efficiency. Tammy Huang, Sales Manager, noted that it’s the unique touch LCD that makes such management possible. In addition to the touch LCD interface, the solution features L2+ switching, intelligent PoE management and an ONVIF support function. An Industrial flat-type touch LCD switch model is also offered, making possible management of large-scale networks.VIVOTEK’s Smart Stream II and H.265 technology allows users to benefit from reduced bandwidth and data storage demands VIVOTEK’s Network Cameras With the theme ‘Security within Security,’ Shengfu Cheng, Director of Marketing and Product Development, demonstrated the first cybersecurity enhanced network cameras in the IP surveillance industry. The three new cameras are armed with Trend Micro’s anti-intrusion software, allowing them to automatically detect and prevent credential attacks and block suspicious events. They also feature VIVOTEK’s Smart Stream II and H.265 technology, allowing users to benefit from reduced bandwidth and data storage demands by up to 90% more than systems employing H.264. Low-Light Surveillance Add to that a new generation of night visibility technology, Supreme Night Visibility II (SNV II) which allows them to reproduce high-quality colour images, even in very low-light conditions. In the security industry, the United States is the largest buyer of electronic security products and spent $12.3 billion on imports in the field in 2016. And Taiwan constitutes North America’s 4th largest trade partner in the electronic security field, with an import value that was close to $1 billion in 2016. Throughout ISC West 2018, Taiwan exhibitors will present their latest innovations. In pursuit of Asia’s Silicon Valley vision of propelling Taiwan to the international forefront of technology, Taiwanese companies continue their pursuit of excellence and innovation.
Companies like – VIVOTEK, QNAP, EverFocus Electronics & PLANET Technology to display their products An exclusive showcase of security technology excellence will be unveiled on the opening day of IFSEC International 2015 which runs 16 to 18 June at ExCeL London. The session is supported by the Bureau of Foreign Trade and the Ministry of Economic Affairs of Taiwan, and will be executed by the Taiwan External Trade Development Council (TAITRA). This dedicated event for security industry experts on 16 June will showcase – for the first time in Europe – the latest innovations from Taiwan Excellence Award-winning Taiwanese companies VIVOTEK Inc., QNAP Systems Inc., EverFocus Electronics Corporation and PLANET Technology Corporation. VIVOTEK Will Display Network Security Cameras – FE8181V & FD8168 Fresh from receiving a 2015 Taiwan Excellence Award from the Ministry of Economic Affairs, VIVOTEK will display two of its leading-edge network security cameras – the FE8181V, a 5 megapixel fish eye network camera, and the FD8168, a 2 megapixel ultra-mini fixed dome network camera. The latest addition to the VIVOTEK portfolio, the new FE8181V is a true day-to-night camera that offers superior image quality 24 hours a day thanks to a removable infrared-cut (IR) filter. Built-in LEDs provide 360 degrees surround illumination up to 10 meters – even in completely dark environments. Vandal-proof IK10 and weather-proof IP66-rated housing make the VIVOTEK FE8181V ideal for coverage of open areas such as airports, sports arenas and retail developments. FD8168 - Ideal For Use In Luxury Developments Launched in April 2015, the compact VIVOTEK FD8168 fixed dome network camera has been specifically designed for indoor applications where both form and function are required. The FD8168’s 2 megapixel sensor outputs 15 frames per second in H.264 compression from compact housing, making it ideal for use in luxury developments where superior image quality should not come at the compromise of discreet design. Simple to install and with a power-over-ethernet (PoE) input design, a single networked fisheye FD8168 fixed dome camera offers the same viewing capabilities as up to four traditional CCTV cameras, but at the fraction of the installation cost. QNAP will exhibit its new Linux-based VS-2200 Pro+ series NVR. The compact 2-bay VS-2200 Pro+ series is packed with functionality and designed to reduce the cost of ownership for SMB and SOHO users. The VS-2200 Pro+ series offers superior performance and advanced surveillance features compared to other entry level NVRs. It is a highly scalable network surveillance system and offers end users a cost-effective way of adapting or expanding their storage capacity based on their long-term recording needs. Compatible With Over 3,000 IP Camera Models An HDMI output allows users to set up and manage the NVR by plugging in a mouse, keyboard, and monitor – with no need for a separate PC – and to remotely monitor multiple cameras, as well as providing the option to play back recordings on a Full HD 1080p local display. Compatible with over 3,000 IP camera models, QNAP has received over 300 orders for the VS-2200 Pro+ and secured a 2015 SecutechExcellence Award since bringing the product to market in April 2015. The latest developments from award-winning Taiwanese companies work to enhance quality while managing costs and driving efficiencies Leading IP-based networking company PLANET will showcase its Z-Wave e-Home Automation Control Gateway. Targeting the IoT, the system is a powerful tool designed to make home networking smarter and safer. Controllable by smart phone or tablet anywhere, anytime, PLANET’s solution uniquely integrates IP-based networking (intercoms, cameras and wireless APs) with Z-Wave Plus (smoke detection, temperature control, door and window) technology. Long Reach PoE Solution PLANET will also exhibit its Long Reach PoE Solution. It is designed to offer a cost-effective way to extend the reach of Ethernet networking and efficiently upgrade analog CCTV to an IP-based surveillance system via existing coaxial cables. TAITRA’s technology showcase will also see EverFocus launch its award-winning ESK1000 Sidekick. Recently crowned the winner of the ‘Tools & Hardware’ category of the SIA New Product Showcase 2015 at ISC West, the ESK1000 is uniquely placed to meet IP camera sidekick demands in a variety of security installation settings. Simple & Cost-Effective Set Up Benefitting from simple and cost-effective set up – with no need for support from a technician – the ESK1000 has revolutionized IP camera installation and testing. Unlike analog systems which use TV outputs and often involve time-consuming testing, installers using the EverFocus ESK1000 can monitor and adjust new and existing camera images remotely by connecting the sidekick to a smart phone or tablet, with no need to contact a central control room. Over 5,000 orders have been placed for the lightweight ESK1000, which is compatible with all major IP cameras and features built-in power-of-ethernet (PoE) and USB outputs allowing the sidekick to charge while completing IP camera installations or tests. Display Eclectic Mix Of Products TAITRA is delighted to be showcasing a selection of Taiwan’s latest technology innovations at IFSEC International. This is all about sharing excellence and best practice in the world of security and safety. The exclusive showcase is set to display an eclectic mix of products as they make their inaugural debut in Europe. The latest developments from award-winning Taiwanese companies VIVOTEK Inc., QNAP Systems Inc., EverFocus Electronics Corporation and PLANET Technology Corporation work to enhance quality while managing costs and driving efficiencies.
MorphoWave biometric access solution captures and matches four fingerprints with a single wave of the hand MorphoWAVE from Safran Morpho took the top honor at the Security Industry Association's 2015 New Product Showcase (NPS), winning the coveted Best New Product Award at the NPS awards ceremony at ISC West on Wednesday. MorphoWave is the market's first biometric access solution featuring high-speed touchless fingerprint matching. MorphoWave captures and matches four fingerprints with a single wave of the hand, for an efficient and comfortable user experience, according to Safran Morpho. Users simply wave a hand over the MorphoWave sensor to be identified. Because the sensor is touchless, the surface remains clean through repeated scans. It reads wet and dry fingerprints without difficulty, which is a supporting factor in its very fast and highly accurate capture and matching rate. SIA's New Product Showcase at ISC West "Each year, the companies competing in SIA's New Product Showcase at ISC West present the leading-edge security solutions that are shaping the industry," said SIA CEO Don Erickson. "These new technologies and solutions are the drivers that are moving the security industry forward, and I congratulate Safran Morpho on their win at this year's NPS." Since its inception in 1979, the NPS has been the security industry's premier awards-based marketing program. This year's NPS Program had 110 entries from 88 companies. In addition, the Judges' Choice Award was presented to IC Realtime for its IC720 360x360 Video Surveillance Camera product. The NPS judges presented awards in 25 product and service categories, and they also presented six honorable mention awards in six categories. The Award Winner’s List appears below, and it also will be posted on the SIA NPS website at http://www.sianps.com. 2015 NPS Award Winners Access Control Devices & Peripherals Cypress Computer Systems / Cypress Integration Solutions OSMIUM Series OSDP Interface Module Access Control Devices & Peripherals Wireless HID Global HID Mobile Access Access Control Software And Controllers IDenticard Access Control PremiSys Security Management Dashboard Convergence And Integrated Software And Solutions Optigo Networks Optigo Integrity Fire/life Safety Xtralis VESDA-E VEA Green / Sustainable Solutions Products MicroPower Technologies SOLVEIL Surveillance System Hosted Solutions CheckVideo HD Analytics Gateway Intrusion Detection And Prevention Solutions Bosch Security Systems, Inc. G Series Control Panel Intrusion Detection And Prevention Solutions Wireless Interlogix ZeroWire Locks/Safes/Hardware KT&C KEES Mobile Apps Honeywell Security Products Americas MAXPRO Mobile App Network Support Solutions Phybridge CLEER (Coax Leveraged Ethernet Extended Reach) Switch Outdoor Perimeter Protection Knightscope, Inc. K5 Autonomous Data Machine Residential And Monitoring Solutions NETGEAR ARLO Tools And Hardware EverFocus Electronics Corp. Sidekick User Authentication, Identification, Credentialing And Management Zwipe Zwipe Access Video Analytics NICE Systems NICE Suspect Search Video Surveillance Advanced Imaging Technologies Axis Communications Axis’ Zipstream technology Video Surveillance Cameras HD (Megapixel) HauteSpot Networks Corporation HiveCAM Video Surveillance Cameras IP Samsung Techwin Open Platform Video Surveillance Data Storage DDN Storage DDN - GS7K Appliance Video Surveillance Hardware And Accessories Dotworkz Systems BASH All-Pro Video Surveillance Management Systems Spectra Logic NVR3 Video Management Solutions
Related white papers
Monitoring Traffic Flow: Everywhere, All The Time
Six Things To Look For When Adding AI Cameras To Your Operation
Ensuring Cybersecurity Of Video
Choosing the Right Storage Technology for Video SurveillanceDownload
Video Surveillance As A Service: Why Are Video Management Systems Migrating to the Cloud?Download
Top 5 Ways to Ensure Visitor Safety and SecurityDownload
exacqVision 21.09 WebinarDownload
- Leussink Uses Hikvision’s Cameras, SmartPole Platform To Ensure Hygiene And Social Distancing
- VIVOTEK Collaborates With Existo To Deliver A Comprehensive Surveillance Solution For Michigan Cannabis Cultivation Facility
- Dahua Technology Provides Low-Light Security Solutions To The New Athos Cave In Georgia
- Dallmeier Deploys 19 "Safe City" Segment German Cities With Data Protection-Compliant Video Technology