The SM42A-82A matrix can be controlled by two remote keyboards, by the local keyboards or by the innovative infrared remote control DCIR in RS485. One alarm contact can be associated with the video input, which can be displayed on the video output in case of alarm. The alarm contacts are independent and configured as normally open (NO) or normally closed (NC). The telemetry control can be performed over the coax cable or by RS485. By a VCR trigger it is possible to control the video sequence to be taped.
| Make | Videotec |
|---|---|
| Manufacturer | Videotec |
| Model code | SM42A-82A |
| Series | SM Series |
| Video inputs / ports | 8 |
| Video Outputs | 2 |
| No of Alarms | 1 |
| Signal Mode | PAL, NTSC |
| TX/RX | TX/RX |
| Detector Range m | 1200 |
| Video Signal V, ohms | 1 Vp-p, 75 Ohms |
| Physical Specifications | Dimensions mm: 167 x 230 x 47 |
| Environmental Specifications | Operating Temperature oC: 0 ~ 45 |
| Analog Switcher Type | Matrix Switchers |
| Additional info | The SM42A-82A matrix can be controlled by two remote keyboards, by the local keyboards or by the innovative infrared remote control DCIR in RS485. One alarm contact can be associated with the video input, which can be displayed on the video output in case of alarm. The alarm contacts are independent and configured as normally open (NO) or normally closed (NC). The telemetry control can be performed over the coax cable or by RS485. By a VCR trigger it is possible to control the video sequence to be taped. |