BQT Solutions Access control systems & kits

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for mail and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing while obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc while sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for maneuver. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

The unprecedented global impact of COVID-19 has taken its toll on all of us, but as cases of the virus thankfully recede, employers are now forced to confront how they can enable a safe return to work for employees. For many employers, this means they will have to carry out a COVID-19 risk assessment, redesign workspaces to maintain social distances, carry out more frequent cleaning, manage the transmission risk and find alternatives to touch-based security devices. Protecting workplace occupants in any emergency requires preparation and clear communication. This is especially critical in a health crisis involving an infectious disease. These are some of the essential best practices that could help organizations reduce the impact on their employees and operations during this pandemic. 1. Use a visitor management system With a visitor management system, organizations have a single source of real-time and historical insights into who is, or was recently, in the workplace. This is especially important because of the need to perform contact tracing should anyone in the organization show symptoms of COVID-19, meaning everyone they have been in contact with needs to be contacted and asked to isolate. Yet still, first impressions are made at the front desk or lobby, where the visitor experience needs to be a positive one. At the same time, though, any emergency event requires that there be strict control over who is entering the workplace. This policy also needs to be clearly communicated to visitors. Doing this minimizes risk to visitors as well as the workforce. In addition to delivering a high-quality visitor experience, the ideal visitor management system must: Enable organizations to meet regulatory compliance mandates and facilitate check-in at a self-service kiosk to minimize wait times. Customize the visitor experience to support specific security needs, such as accelerating and simplifying check-in or requiring additional security pre-checks. Automate compliance as it relates to visitor access rules with historical visit reports. 2. Pre-check questions at visitor registration kiosks Organizations can strengthen security at the registration kiosk using a flexible, enterprise-grade visitor management system to add visitor sign-in steps. This has proven successful in the past when used to control the spread of infectious disease during an outbreak. An example of this is a U.S. children's hospital which managed to reduce facility infection rates by 25 percent over a two-year period using a commercial, off-the-shelf physical identity and access management (PIAM) solution from HID Global. The solution provides two particularly important capabilities that can be used by organizations to protect their workplace from the uncontrolled spread of an infectious disease: Enhance visitor registration policy with additional mandatory questions to help identify any visitors who may need other screenings. Extend the visitor registration kiosk with a mandatory pop-up asking further questions during visitor check-in. 3. Understand who has visited your workplace Successful controlling the spread of infection throughout a facility requires the ability to automatically maintain an auditable trail of activity. This can be done using an enterprise-grade visitor management system that makes it easy to retrieve historical visit reports. This provides a timeline of who was in the workplace, and when they were there. Key features include: A single dashboard providing useful visitor insights at your fingertips. Historical reports that provide visitor details including location and contact information, all in compliance with General Data Protection Regulation (GDPR) and other privacy regulations. 4. Clearly communicate how infection risks can be reduced Global organizations must actively communicate with visitors and employees on the outbreak of infectious diseases and follow best practices outlined by the World Health Organization (WHO). Here are several things organizations can do in this area to help maintain a safe and healthy workplace: Re-enforce and communicate WHO best practices with guideline posters in the front lobby and throughout the workplace. Add posters that also encourage regular and thorough washing of hands. Encourage everyone to cough or sneese into their shirt sleeve in their flexed elbow or cover their mouth and nose with a tissue. Encourage everyone to keep a relatively safe distance from each other and use alternatives to handshakes when saying hello. Organizations must contend with a variety of workplace challenges during the outbreak of an infectious disease. These challenges can be solved with best practices that include a comprehensive visitor management system that automates critical check-in policies and maintains an auditable trail of visitor activity.  

Returning to work after the global pandemic will not be business as usual, and security systems are an important asset when it comes to helping to keep occupants and buildings safe. For example, video analytics can provide insight into how spaces have previously been used and can help to predict where and when occupants encounter each other or congregate. These foot-traffic patterns can inform settings for a variety of devices – like ventilation and temperature controls – and even help owners create social distancing plans and monitor personal protective equipment (PPE) compliance. “While the ‘new normal’ is still being defined, we believe there will be a greater focus on creating healthier environments while also complying with new regulations,” says Marcus Logan, Global Offering Leader, Honeywell Commercial Security. “Temperature, humidity, energy efficiency, security, safety, comfort, productivity, and demonstrating compliance with regulations are all a part of a healthy building.” For example, social distancing is a new concept for the workplace. How do you make that happen in an open work setting, in breakrooms, elevator lobbies and meeting spaces? Optimized systems create healthier environments Anxious employees will need reassurance about returning to the workplace Building owners will need to look at how they can optimize their systems – or deploy new ones – to create a healthier environment. Building technologies, like those provided by Honeywell's Healthy Buildings solutions, provide building owners with more control over critical factors to encourage sustained compliance with changing building standards, safety guidelines, government-issued regulations, and a company's risk management policies. These solutions also provide transparency for occupants into a building's status, says Logan. Hygiene will be a critical issue: People will want to know that the spaces are ready for their return. Increased cleaning procedures and schedules will evolve, and a way will be needed to demonstrate the procedures are effective and that they have been strictly adhered to. Identifying ways to measure effectiveness of sanitisation and track compliance to the procedures will be a key challenge to solve. This is a space that will evolve significantly in the coming months and years, says Logan. Access control and video analytics Contact tracing is a new requirement in some businesses, and security technology – like access control and video analytics with advanced reporting – can help. Access control technology integrated with video analytics can be used to trace occupant movements within a facility. These technologies capture data that can be used with advanced reporting to provide a digital footprint of where a person has been within a facility and if they may have been exposed to someone identified as being infected with a contagious virus. Building owners can then proactively notify exposed individuals evolve to self-quarantine and minimize further spread of an infection. Video analytics can help to predict where and when occupants encounter each other Anxious employees will need reassurance about returning to the workplace. They will not only seek confidence that the building is optimized for a healthier environment but also that processes are in place to quickly identify and respond to potential issues. Transparency and visibility into how the building works and the health of the environment will help to reassure occupants returning to the workplace. “One way to do this is to share building analytics with occupants – to help them understand factors about the indoor air quality or occupancy density,” says Logan. Controlled health, safety and security Honeywell’s solutions provide building owners with more control over critical health, safety and security factors to encourage sustained compliance with changing building standards, safety guidelines, government-issued regulations and a company’s risk management policies, Logan adds. Visibility into how the building works and the health of the environment will help to reassure occupants returning to the workplace Every day there is new information coming from the medical and scientific community about COVID-19, and the building industry is just starting to learn what it all means. Logan warns that there is no single solution that will keep every environment healthy and safe. A good strategy features deploying a combination of solutions, optimising systems and being vigilant to make sure that companies are sustaining compliance to new and changing regulations, says Logan. “Today more than ever we must be mindful of the changing culture of how buildings are managed by making apparent the need to be mindful of health and well-being in all aspects of our lives,” says Logan. Honeywell has developed outcome-based solutions that allow building owners to transparently address building quality factors while supporting their business continuity needs in the uncertain environment. “We’re giving them the data they need to confidently reassure their employees to accelerate their business operations,” he adds.

Ava Group (AVA), a provider of security risk management services and technology will be showcasing its portfolio of security solutions at ISC West - Las Vegas, booth 25103. ISC West is the largest converged security industry trade show in the US with the exhibition taking place from April 10-12th. The event provides a major platform for professional networking, sourcing new suppliers and introducing new products and technologies, encompassing everything from access control to unmanned vehicles. ISC West also includes the SIA Education@ISC conference program, running from April 9-11th. Risk Management Services Ava Group’s technology division incorporates two well established security risk management companies - Future Fibre Technologies (FFT) and BQT Solutions, both of which will be on the booth this April. As a provider of risk management services and technologies, Ava Group offers a portfolio of complementary solutions encompassing both fiber optic intrusion detection as well as high security access control and locking. Ava Group is proud to present the latest solutions from its technology division, namely the Orca lock and latest enhancements to the Aura Ai-2 controller Ava Group is proud to present the latest solutions from its technology division, namely the Orca lock and latest enhancements to the Aura Ai-2 controller. The enhanced Aura Ai-2 from Future Fibre Technologies features unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range. Outdoor Locking Solution This product features new ultra-low noise optical detection electronics. This ensures a single controller can cover a distance up to 110 kilometers, accurately detecting, locating and reporting multiple disturbances to just +/- two meters. BQT Solutions will be demonstrating the new high-strength Orca lock (YG80) – providing ultimate security for all environments. Building on the success of the award winning YG10, the Orca lock is designed for securing gates, roller doors, shipping containers and any other large door or entryway. Alongside the Orca’s impressive physical attributes, a unique feature is its ability to fully integrate into an access control system, surpassing any other solutions available in the market. Orca is fully monitored, weatherproof, and user configurable - providing the perfect indoor and outdoor locking solution. Real-World Projects The Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats As well as getting to know the product range, the Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats. Newly appointed Chief Operating Officer, Scott Basham commented, “We’ve seen continued growth in demand for our products in the US market and returning to ISC West provides us with a perfect platform to showcase our broad range of capabilities and explain to visitors how our product range can be applied to meet their particular needs. We always welcome the opportunity to be face-to-face with our customers worldwide and thoroughly enjoy being able to engage directly with the market in this way.” Fiber Sensing Technology Alongside their presence in the exhibition hall, Ava Group’s CTO – Technology, Dr Jim Katsifolis will be presenting ‘Fiber Optic Perimeter Intrusion Detection Systems (PIDS): Trends, Myths and Realities Revealed’ 10:15 am on April 9th, Sands 302. This presentation promises to cover how best to select appropriate fiber sensing technology products when specifying, as well as how to assess the true performance of such PIDS systems. With over 1,000 exhibitors and brands and an anticipated 30,000 security professionals, ISC West is a must-visit for anyone in the security risk industry.

Ava Group (AVA), a provider of security risk management services and technology will be showcasing its portfolio of security solutions at Intersec Dubai 2019, stand S3-C48. Intersec Dubai features a rich selection of exhibitors in Security, Safety & Fire Protection, attracting visitors from the Middle East, Africa, the Indian subcontinent and well beyond. Ava Group will be presenting the latest exciting solutions from its technology division - which incorporates Future Fibre Technologies (FFT) and BQT Solutions. As a provider of risk management services and technologies, Ava Group offers a portfolio of complementary solutions encompassing both fibre optic intrusion detection and high security access control and locking. Increased Investment As a key event for the region and beyond, Intersec Dubai is the perfect way for security providers and buyers to start 2019" Mark Horton, Global Sales & Marketing Director commented, “As a key event for the region and beyond, Intersec Dubai is the perfect way for security providers and buyers to start 2019. Our solutions offer the very latest in security technology and the highest levels of protection, key benefits that we know are always well-received by visitors at the event.” Mark continued, “Over the last couple of years we have seen a significant growth in demand for our products in the Middle East, with increased investment in infrastructure across the region as a whole. Because of continued growth in the market, we have also invested in the expansion of our Dubai-based office and regional support team to ensure we are perfectly placed to supply and service our customers.” Reporting Multiple Disturbances Future Fibre Technologies will be showcasing its enhanced Aura Ai-2 controller. Featuring unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range - this product features new ultra-low noise optical detection electronics. This ensures a single controller can cover a distance up to 110 kilometres, accurately detecting, locating and reporting multiple disturbances to just +/- two metres. Also on stand S3-C48, BQT Solutions will be demonstrating the new high-strength Orca lock to the middle east market Also on stand S3-C48, BQT Solutions will be demonstrating the new high-strength Orca lock to the middle east market. Building on the success of the award winning YG10, the Orca lock is designed for securing gates, roller doors, shipping containers and any other large door or entryway. Alongside the Orca’s impressive physical attributes, a unique feature is its ability to fully integrate into an access control system, surpassing any other solutions available in the market. Security Risk Management Orca is fully monitored, weatherproof, and user configurable - providing the perfect indoor and outdoor locking solution. As well as the products themselves, the Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats. Mark concluded, “We are looking forward to discussing recent key examples of our technology in action, including a major military closed data network where our data network infrastructure protection solution is protecting against tapping and tampering. These projects illustrate the depth of our expertise in security risk management and highlight the level of protection which we achieve to client’s assets and infrastructure. If you are visiting the event come and have a chat with our friendly and expert team on Stand S3-C48 about your specific security needs.”

Ava Group (AVA), global provider of security risk management services and technology will be presenting its portfolio of security solutions at International Security Expo, stand E74. The expo also hosts a range of certified conferences and workshops covering every major sector of the security industry. Taking place over two days at London Olympia, the event focuses on the needs of government and CNI amongst other key sectors. Fiber Optic Intrusion Detection Ava Group will be showcasing the latest solutions from its technology division - incorporating Future Fibre Technologies and BQT Solutions. The Ava Group is a market leader of risk management services and technologies, offering a portfolio of complementary solutions encompassing both fiber optic intrusion detection and high security access control and locking. Mark Horton, Global Sales & Marketing Director – Future Fibre Technologies commented, “Our brands have a strong pedigree in some of the expo’s key sectors including government and CNI, and we’re very much looking forward to discussing with visitors how Ava’s solutions can be applied to protect their organizations. Ava Group has had some major project wins in recent months including a major military closed data network, who have selected our data network infrastructure protection solution to secure its network against tapping and tampering. It is projects such as this that demonstrate Ava Group’s expertise in security risk management and protection of client’s assets and infrastructure.” Perimeter Security Technology New ultra-low noise optical detection electronics ensure a single controller can cover a distance up to 110 kilometres Ava Group’s CTO – Technology, Dr Jim Katsifolis will be presenting in the Perimeter Security & Intrusion Detection Technology Workshop on ‘Security within security in a converged perimeter intrusion detection solution’ on the first morning of the exhibition. An accomplished R&D professional, Jim will explore the latest generation of PIDS technologies, the convergence of intrusion detection and cybersecurity as well as addressing some common myths in this field. Featured on the stand will be the enhanced Aura Ai-2 controller from Future Fibre Technologies. This market-leading product offers unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range. New ultra-low noise optical detection electronics ensure a single controller can cover a distance up to 110 kilometres and can accurately detect, locate and report multiple disturbances to +/- 2 metres. Security Management Solution Ava Group is also previewing its Small Site Assurance range, which is designed to protect remote unmanned locations through a holistic security management solution. The solution incorporates intrusion detection, access control and locking as well as environmental monitoring - all controlled remotely from a simple graphical user interface. The Small Site Assurance range is particularly suited for utilities, telecoms, energy, oil & gas and data centers that are at risk from threats such as vandalism, opportunistic and targeted theft, terrorist attack, trespass, system failure, accident or injury. Orca Locking Security Solution The Orca lock is a high-strength lock designed for securing gates, roller doors, shipping containers, and any other large door or entryway From BQT Solutions, Ava Group will be demonstrating the Orca lock. Building on the success of the award winning YG10, the Orca lock is a high-strength lock designed for securing gates, roller doors, shipping containers, and any other large door or entryway. Alongside the Orca’s impressive physical attributes, its ability to integrate into an access control system is what elevates it beyond anything available in the market. Fully monitored, weatherproof, and user configurable, the Orca is the perfect indoor and outdoor locking solution. BQT will also demonstrate the latest software integration between its miPASS Access TMS software and Paxton’s Net2 access control software. The integration enables the seamless addition of BQT biometric readers to new or existing Net2 systems, facilitating a smooth transition from less secure card technologies to more robust options like fingerprint biometrics and BQT’s own miPASS credentials.