Access Control Softwares(648)
The cost-effective, hassle-free way to protect private rooms from public access. You don't have eyes in the back of your head. It is impossible to keep watch over every private door in a public-facing space: the storeroom in a shop or pharmacy, or the toilet for staff use only. That's when you need Code Handle®. This simple, secure, easy-to-fit handle with a built-in PIN-pad locks the door for you — with no wiring, no expensive access control system, no cumbersome keys and no major changes to your current door. Code Handle works with an electronic PIN code to make sure only authorised people, like staff, can unlock the door. Press a 4-digit code on the handle’s keypad and the door opens. Code Handle adds security and convenience to any private room adjoining a public area. Sure, you could continue using a key-operated lock on every door. But then you have to keep track of the key and remember where it is every time. For busy doors, chasing up keys becomes a full-time job. The solution is the simple, affordable Code Handle. You’ll receive a Master Code and up to 9 different user PINs. Code Handle has another trick up its sleeve. It locks itself when you close the door. Did you remember to lock up? Don’t worry, because Code Handle never forgets. Simple installation Upgrading doors is a snip, because Code Handle is easy to install and retrofit. It works together with your existing locking unit: keep the cylinder or lock and only change the handle to a battery-powered Code Handle. All it takes is two screws to fit a Code Handle to almost any interior door. No need to cable the door or connect it to the mains. No need to install a complex system. When do you need Code Handle? What is in your archives? Irreplaceable documents deserve an extra layer of security. Are your drug and medicine stores safely locked? An all-in-one secure PIN and door handle keeps casual intruders at bay — and keeps you on the right side of compliance. If your shop is busy, who keeps watch over the store room? Public areas with high traffic are hard to police when you can’t afford a security team. So, if your toilet is for customer use only, Code Handle keeps it locked without the hassle of a key. And what about the office? Surely not everyone on your floor should be reading the documents you left on your desk? Code Handle keeps sensitive files, private rooms, personal belongings or valuable stock separated and secure from the public. You can’t see what’s behind you. Thankfully, with Code Handle, you never need to. Learn more about Code Handle, visit: https://campaigns.assaabloyopeningsolutions.eu/codehandle
You can work smarter and more sustainably when electronic locks and keys power your security. An electronic locking solution minimizes security risks when keys go missing. With an eCLIQ system from ASSA ABLOY, you can manage everyone’s access from anywhere, at any time — electronically, securely and wirelessly. Based on award-winning CLIQ® access control technology, the eCLIQ system is built around precise locking mechanics and high-end microelectronics. A battery inside each programmable key powers the wide range of programmable cylinders and padlocks — and secures every data transfer. An eCLIQ system is also convenient. Thanks to multiple software options, you manage users’ access rights in a way that suits you best. Authorised key-holders carry a single, battery-powered key programmed with only their cleared access permissions. Low maintenance for technical components you can trust Robust and durable, eCLIQ cylinders are available for a wide range of doors, cabinets, lifts, alarm boxes, machines and entrance gates. Looking after your eCLIQ components is easy: an integrated lubricant reservoir ensures cylinders remain maintenance-free for up to 200,000 cycles. eCLIQ keys are durable, compact, and waterproof (IP67). They are easy to reprogram, enabling temporary and time-limited access permissions for every employee or contractor. AES encryption, rapid processing, and efficient energy management is built into the chip. When a key’s battery runs out, it is easily replaced without tools. Mechanical and encrypted electronic elements work together to make an eCLIQ installation highly resistant to both physical and electronic attack. Easy installation — simple, secure management Managing eCLIQ is straightforward. You can program keys with easy-to-use eCLIQ Manager software: choose between a local software installation or our secure web-based software which manages access rights from anywhere, in the cloud. Security managers can host the Web Manager software on their own or use ASSA ABLOY’s Software as a Service solution. Users can also update their own keys with a range of programming devices, including wall-mounted units. With eCLIQ, missing keys are quickly de-authorised, cutting risks associated with key loss or theft. At any time, facility managers can generate a full audit trail to discover who has accessed which locks. Unlike other electronic access control systems, eCLIQ uses no mains electricity. The microelectronics inside an eCLIQ lock are powered by a standard battery inside every key. Energy-efficient and sustainable, battery power also minimizes disruption when you switch to eCLIQ. Because there is no cabling around the door, you don’t need to schedule invasive, expensive electrical wiring. eCLIQ in action “eCLIQ is more durable, more secure and more efficient than conventional locking systems,” says Stephan Schulz, CLIQ® Product Manager at ASSA ABLOY EMEA. “This evolution of our award-winning CLIQ® technology is already protecting businesses and public services across Europe. A range of sectors and building types — from banks and hospitals to shops and warehouses — have learned eCLIQ provides the control and flexibility their premises need.” For an access control overhaul at University Hospital Frankfurt, managers sought a secure locking system for a new building: 1,100 eCLIQ cylinders and keys provided the solution. Now, with eCLIQ installed, nurses update access rights every morning for the day ahead. This new workflow minimizes security vulnerabilities and keeps everyone safer. Retail banking combines high security with complex workflows. Staff need efficient access. Facility managers need the flexibility to design access permissions around individual needs and clearances. Creval’s bank doors across Italy’s Lombardy region are now locked with more than 30 eCLIQ cylinders, putting managers in total control of entrance security. In the unlikely event a key is misplaced, Creval administrators simply delete it from the system. In Germany, eCLIQ locks AMPELMANN GmbH branches and their 2,200 m2 logistics centre, meeting the needs of their decentralized branch organization. Its 8 Berlin branches are staffed by several permanent employees. External service providers like cleaners need access. eCLIQ provides it — safely, securely and without major key-management workload. Learn more at: https://campaigns.assaabloyopeningsolutions.eu/ecliq
Gallagher Command Centre is a powerful access and control solution designed to give you complete site control. Fully configurable to suit the unique needs of your site, Command Centre allows you to define, manage and report on all aspects of your system. Everything that happens on-site is relayed to your Command Centre operators in real time, enabling a swift and appropriate response to security threats. Seamless integration with complimentary security and site management solutions means Command Centre delivers on its promise. You’re in command. Command Centre v8 introduces new Site Plan functionality for greater situational awareness and responsiveness; Broadcast notifications to Mobile Connect for better communication in emergency situations; and Status and Overrides REST APIs for increased integration flexibility. Version 8.30 out soon with new and improved features.Add to Compare
Traffic access control professionals can now set up Delta Scientific MP5000 portable barriers on concrete, asphalt, compacted soils or vegetation in 15 minutes or less to provide certified M50 stopping power. Original models provide M40 protection while the new models stop 15,000 pound (6804 kg) medium-duty trucks traveling at 50 mph (80.4 kph). Significantly, Delta are releasing the first M50 rated portable barrier system to the world at a time when military grade portable protection is imperative. With over 2,000 working units in the field over the past decade, this portable barrier has proven its capabilities to clients throughout the world. Especially important to our government customers and select commercial clients, high security professional can now protect assets that have traditionally required an M50 rating with a portable product. The MP5000 is available in 12-, 16- and 20-foot openings. It is easily towed behind a truck or other vehicle to its location where it sets up in less than fifteen minutes. Once it has performed its duty, it is quickly packed up and towed to its next project. The MP5000 is self contained and battery powered. It has been seen at G20 meetings, presidential inaugurations, papal parades, international embassies, municipal parades, Mardi Gras, stadiums and other civilian locales from the United States to Australia and is especially popular at forward operating military bases from Afghanistan through the rest of the world.
Hikvision announced its new access control and time attendance offerings, the MinMoe Face Recognition Terminals, promising a new era of face recognition access control is coming. To meet a multitude of real-world scenarios and customer needs, the MinMoe Face Recognition Terminals lineup features four total series: Value Series, Pro Series, Ultra Series, and Face Recognition Modules for Turnstile. With powerful functions and competitive prices, the Value Series (DS-K1T341A/DS-K1T331) products have been uniquely designed for SMB scenarios, such as offices and retail shops. “We see great advantages in the ‘touch-free’ experience that face recognition provides. With advanced deep learning technology and diverse practical functions, we expect that MinMoe Face Recognition Terminals can bring more security and efficiency to our small and medium sized customers, making access control and time attendance much easier,” says Frank Zhang, President of the International Product and Solution Center at Hikvision. Fast, accurate recognition, even in darkness Hikvision MinMoe Face Recognition Terminals are powered by a deep learning algorithm, which increases accuracy of face recognition to over 99% and enhances verification speeds to under 0.2 seconds. The enhanced verification rates and accuracy ensure a pleasant, “touch-free” experience for users – a vast improvement over swiping ID cards or fingerprint scans. Furthermore, MinMoe Face Recognition Terminals perform well in low- and even zero-light environments. Better security with face anti-spoofing Equipped with dual lenses – a visible light lens and an infrared lens – MinMoe Face Recognition Terminals will only grant access when both lenses detect the same person, as well as determine whether the face is actual, not an image. This anti-spoofing technology makes access control management much safer and prevents most attendance fraud. Multiple linkages and third-party integration options Along with door linkage, MinMoe Face Recognition Terminals can be linked with NVRs for data recording and storage. They can also be linked with network cameras to allow clear video recording of the scene when any pre-set events are triggered. Meanwhile, MinMoe products provide an abundance of third-party integration options for extensive compatibility, allowing quick and cost-effective connections between MinMoe Face Recognition Terminals and customers’ existing door control and attendance systems.
HID Signo™ is the signature line of physical access control readers from HID Global. The versatility, performance and connected capabilities of HID Signo readers set a new industry benchmark for the most highly adaptable, interoperable and secure approach to electronic access control. Offering an unparalleled breadth of functionality, HID Signo affords security system installers and administrators a simple and effective approach to secure access control for almost any scenario. With support for the widest array of credential technologies — past, present and future — HID Signo is the perfect choice for those looking to make the transition to a secure authentication technology. HID Signo readers transcend the traditional approach to security by being designed to be connected and managed remotely without needing to physically touch each device. This functionality empowers access control systems to dynamically respond as new needs, configurations or threats arise. The HID Signo Reader 20 is a founding member of the Signo platform. Offering a truly dynamic approach to secure electronic access control, HID Signo Readers are designed to be highly versatile, powerful, and connected for the future. A perfect fit for door applications requiring a narrow card reader, the HID Signo Reader 20 supports an unparalleled range of different credential technologies in a variety of form factors including cards, fobs and mobile devices.
As building security becomes smarter, the need for electronic access control systems spreads further. Wired access points and security doors have long been the backbone. Yet at the same time, even buildings with extensive electronic systems leave mechanically locked doors unmonitored and unguarded — and certainly not “smart”. Mechanical locks cannot be connected. Thankfully, the latest generation of wireless locks can replace them easily and integrate them seamlessly within almost any access system. A recent industry survey — cited in the “Wireless Access Control Report 2018”, from ASSA ABLOY and IFSEC Global — finds integration is an increasing concern. Over 90% of industry professionals polled for the report suggest integrating security systems with each other (and with other smart building systems) has increased in importance in the last few years. Integration is a recurring theme in conversations among professionals. For 53% of survey respondents, easy integration with CCTV, alarms, time and attendance, lighting and HVAC would make them interested in upgrading to a particular product — more than any other factor. Forty-three percent said easier integration with existing access control systems would make them more likely to upgrade. But why the focus on integration? What are the advantages? Why integrate? Fewer security interfaces are easier to support and so require less training. Integration can also enhance the experience of building occupants. One credential opens the car park, then the building, and accesses their laptop and buys lunch in the café. Integration across the business also means security systems — and security teams — contribute to business efficiency, not just the protection of people, premises and other assets. Integrate HR systems with your access control system, for instance, and smart access cards can be automatically revoked when people leave the organization, reducing overheads and even headcount. A majority of those polled for the “Wireless Access Control Report 2018” believe it very important (58%) that access control supports open standards in order to be flexible and future-proofed. A huge majority (91%) consider it at least somewhat important. Future-proofing is high on any list of procurement criteria. Will your system accommodate a changing business and the evolution of functions within it? Can you extend access control with components that contribute to, rather than detract from, the flexibility of all your building systems? The solution to extend access control Expanding the coverage of traditional locks can be expensive and intrusive. But one fast, easy and cost-effective alternative enables you to forget about keys and the hassles of key management: wireless devices like Aperio®, battery-powered locks with integrated RFID-readers. The aforementioned report cites growth forecasts for the wireless access control market of around 8% annually through 2025. The ease and cost-efficient integration wireless offers is surely driving this growth. Because Aperio® has an open architecture, it is flexible and modular, so those who already have wired access control and want to add more doors to their existing system find wireless is the solution. Aperio® wireless locks integrate with security systems from over 100 different OEMs worldwide, for new installations or to upgrade an existing system. Integration is seamless, extending the reach of an existing system with future-proofed devices. Security administrators operate the new Aperio®-equipped doors from the same interface as the installed system. Site users carry a single smart access card for all doors, and other functions like canteen payments or library loans are just as easy to integrate. What if your security system uses mechanical keys, without electronic access control? Wireless locks like Aperio® can also be the right solution. Battery-powered Aperio® RFID-equipped cylinders, escutcheons, handles and locks can be fitted as a new access control system, or extend an existing installation by linking new doors to the same system wirelessly. There’s no need for staff to swap their key-cards, nor for anyone to carry more than one credential. Aperio® locks work within almost every major access control ecosystem on the planet, from over 100 different manufacturers. They are energy-efficient, with batteries lasting an average of 40,000 cycles (typically 2 years) before they need replacing. “It’s easy to start the upgrade process,” says Matthias Weiß, Aperio® Product Manager at ASSA ABLOY EMEA. “Your security or facilities manager only needs to contact their regular access control provider to find out if they offer Aperio®. We can upgrade nearly any system.” Aperio® integrates access control — quickly and painlessly Installing wireless locks is also more cost-effective than hard-wiring more doors, because there’s no cabling or invasive building work around the door. Changing door hardware is unnecessary. For example, it’s fast and easy to switch a mechanical handle for an Aperio® wireless handle with integrated RFID reader, to bring more doors into an access system. (Installation takes mere minutes: see https://youtu.be/lr6Sw95qqm8) Aperio® devices with built-in RFID readers fit almost any opening or security level. Aperio® locks protect both exterior and interior doors, from fire and escape route doors to meeting rooms, labs and offices; wooden, glass or aluminum doors are no obstacle. The portfolio includes cylinders, escutcheons and complete locks for security doors, plus a revolutionary new wireless handle with integrated RFID reader, which recently won Intersec’s Access Control Product of the Year. Aperio® locks are compatible with all common door profiles: Euro, French, Finnish, Scandinavian and Swiss. Integration with your existing system can be Online or Offline, or both. Learn more about Aperio®, visit https://campaigns.assaabloyopeningsolutions.eu/aperio
Openow™, the new complete mobile solution for SMARTair® wireless access control, makes life easier and more secure for everyone. Users of a SMARTair® access control system can open doors with their mobile phone and the Openow™ app. Facility managers can send, revoke and update virtual keys from anywhere. For security staff, business owners and every user of a site — from nurses on a ward, to mobile workers in a co-working space, to students in an accommodation block — Openow™ takes mobile credentials to the next level. With Openow™, facility managers and security administrators have more control and no longer need to administer physical credentials. And it’s fast and easy to upgrade an existing SMARTair® system to work with Openow™ or to install mobile-ready, wireless SMARTair® access control from scratch. The new Openow™ app has been designed around convenience, security and user experience with virtual keys. Information transfer between administration software, smartphone app and the SMARTair® device is protected by end-to-end encryption. “Right from set-up — involving simple, secure email subscription — users find the Openow™ app a joy to operate. Tap a SMARTair® lock with your phone carrying a valid virtual key, and the door unlocks. The device you carry everywhere — the smartphone — now replaces a separate RFID card with MIFARE®, DESFire, iCLASS® and other proximity technologies.” explains Félix Morán SMARTair® Product Manager at ASSA ABLOY. Openow™ also adds further layers of security to every premises Facility managers find life a lot simpler when managing access rights with the Openow™ mobile solution. Change the validation time in the administration software to automatically update a user’s virtual key (when the phone has a signal). Cancel a virtual key and it vanishes immediately from a user’s app. Facility managers can check and amend the validity of each virtual key whenever they want, and wherever they are. The complete mobile solution includes the SMARTair® device range, with wireless escutcheons and cylinders plus wall readers; the intuitive SMARTair® TS1000 software; user credentials, e.g. cards and the new Openow™ app. Business owners and directors project the right image for their premises when they offer mobile credentials via Openow™. Phones replace plastic key-cards, so there’s no need for a card activation terminal on reception or elsewhere. Users also save time, because there’s no longer any need to collect or validate an access card: your key is already on your smartphone. Openow™ makes it easy to organize virtual keys inside the app, check how long they are valid, and protect them further with an individual PIN. If you have virtual keys from multiple sites or premises, Openow™ easily handles those, too. No more key-card, or wondering where you left it; no more appointments to pick one up or have it revalidated. With Openow™, if you have your phone, you are already carrying your keys. The SMARTair® Openow™ app is free to download now from Apple’s App Store and the Google Play Store. For more information, see https://campaigns.assaabloyopeningsolutions.eu/openow?utm_campaign=smartair-openow&utm_source=PRAdd to Compare
Hikvision has released its new generation of IP Villa Door Stations (DS-KV8X13/DS-KV61X3 series), providing a simpler video intercom solution for houses and small buildings, and delivering more convenience, security and style on the doorstep. The door stations have been designed to be user-friendly, making installation easy and cost-effective. Standard Power over Ethernet (POE), Plug and Play, and Wi-Fi technologies simplify installation, and can provide fast and convenient data transmission. Either intuitive step-by-step configuration wizard on machine or online web configuration way makes the set-up process more convenient and easier. For DS-KV8X13 series, both flush and surface mounting options are available for a flexible installation. With protection to IP65 and IK08 standards, Hikvision’s DS-KV8X13 series IP Villa Door Stations are robust and resistant to force and water. A 2MP Fisheye IP camera, which supports WDR, can provide sharp HD images, enabling users to see clearly who is outside and to keep better security and peace of mind. Other features include: Noise suppression and echo cancellation Low illumination Access control functions Tamper-proof 2.4 GHz Wi-Fi Hikvision’s new IP Villa Door Stations are a great addition to solutions in homes, shops, offices and other small buildings. With help of a mobile app, securing homes or small businesses is a breeze, even when users are on the move.
Dahua’s new Wi-Fi Video Doorbell (DHI-DB11) is a part of the Dahua LincX2PRO camera series. This new series is designed to integrate with home and small business applications for a comprehensive and seamless professional installation. The doorbell offers Passive IR motion detection and transmits video and audio to a mobile phone for remote visual confirmation and communication with visitors using the built-in microphone and speaker. The camera offers a 140° wide view, capturing whatever is below the camera to prevent visitors from ducking under the field of view. This video doorbell is compatible with Dahua NVRs; Dahua X5, X7, and X82 Series HDCVI DVRs, and with the DMSS mobile application for easy integration. The 1080p video doorbell features a built-in microphone and speaker for real-time communication and an SD card slot for recording at the edge without having to pay a subscription fee.
Most likely, tenants and visitors to your coworking space value agile, modern solutions. In other words, pretty much the opposite of mechanical lock-and-key technology. Thankfully, there is an intelligent security alternative that won’t blow your budget or create renovation chaos. One forecast suggests flexible workspaces in the EMEA region will number around 17,000 by 2022*. Coworking provision is a dynamic market, with increasingly fierce competition for a user base that knows what it wants. The right access solution helps your space stand out from competitors and can deliver real benefits for users and the way they work. Smarter space use Many creative and tech-oriented coworkers demand round-the-clock access. Indeed, according to the Harvard Business Review, the sense of control this flexibility gives is one reason people thrive in coworking spaces**. If you have an access system you can manage remotely, from a PC or smartphone, staff need not be on-site to manage people coming and going 24/7. An intelligent access system can also feed back critical business data in real time. Who is using your space? And when? The more you know, the more likely you will make better business decisions. Safer belongings, slicker incident handling Open, collaborative coworking involves lots of expensive tech and personal items lying around. In the words of one report by commercial property experts JLL, “While coworking spaces are perhaps safer environments to leave equipment unattended than your typical coffee shop, companies still risk a loss of equipment.”*** You can maximize security and minimize space users’ risk with effective access control. Coworkers will not rent desks where intrusion is easy — and you do not want to operate a space with a reputation for petty theft. Imagine the worst happens to a tenant: something unexpected occurs or their valuables go missing. An access control system helps you sort it out quickly and efficiently. Because everyone carries personalized credentials — and you can order instant audit trails using access system software — you quickly find out who went where and when. Investigation is easier. Cutting out cutting keys In any sizeable workspace, standard physical keys are difficult to track without a dedicated key management system. Some types of physical key are relatively straightforward to cut without permission. How much time do you waste when a key is lost or stolen? Changing a standard mechanical lock is time-consuming and expensive. When you install an access control system, one click cancels any “key”, key-card or smartphone credential. You can program and reprogram your door devices as many times as you like. You’ll never change a lock again. Room to grow — or change your mind Around two-thirds of coworking providers expect to expand their workspace in the future****. The good news is wireless access systems like ASSA ABLOY’s SMARTair are almost infinitely flexible; you can bolt on new areas, easily move locks around, or add new sites as you grow. Wireless access control helps you change the security status of a door at any time — or expand your coworking area to another floor cost-effectively. Add a meeting space, connect two offices, no keys or cables needed. Image can be everything Modern workers prioritise convenience and user experience. The latest electronic access systems include an option for them to carry virtual keys on their smartphone, in place of a physical key or key-card. Savvy, smartphone-enabled access will set your space apart from local competitors. Could your coworking space find another revenue stream by hosting weekend or evening events? Because smartphone keys are so flexible, they make it easy for you to issue time-limited access for temporary staff or one-time attendees. When the event is over, their “keys” no longer unlock your doors. You do nothing — it’s all automatic. To learn how to transform coworking space security affordably, download a free coworking access control guide or book a free expert consultation now: https://campaigns.assaabloyopeningsolutions.eu/smartair-coworking?utm_campaign=smartair%20coworking&utm_source=PR
HID Signo™ is the signature line of physical access control readers from HID Global. The versatility, performance and connected capabilities of HID Signo readers set a new industry benchmark for the most highly adaptable, interoperable and secure approach to electronic access control. Offering an unparalleled breadth of functionality, HID Signo affords security system installers and administrators a simple and effective approach to secure access control for almost any scenario. With support for the widest array of credential technologies — past, present and future — HID Signo is the perfect choice for those looking to make the transition to a secure authentication technology. HID Signo readers transcend the traditional approach to security by being designed to be connected and managed remotely without needing to physically touch each device. This functionality empowers access control systems to dynamically respond as new needs, configurations or threats arise. The HID Signo Keypad Reader 20K is a founding member of the Signo platform. Offering a truly dynamic approach to secure electronic access control, HID Signo Readers are designed to be highly versatile, powerful, and connected for the future. A perfect fit for multi-factor authentication door applications requiring a narrow keypad reader, the HID Signo Keypad Reader 20K supports an unparalleled range of different credential technologies in a variety of form factors including cards, fobs and mobile devices.
HID Signo™ is the signature line of physical access control readers from HID Global. The versatility, performance and connected capabilities of HID Signo readers set a new industry benchmark for the most highly adaptable, interoperable and secure approach to electronic access control. Offering an unparalleled breadth of functionality, HID Signo affords security system installers and administrators a simple and effective approach to secure access control for almost any scenario. With support for the widest array of credential technologies — past, present and future — HID Signo is the perfect choice for those looking to make the transition to a secure authentication technology. HID Signo readers transcend the traditional approach to security by being designed to be connected and managed remotely without needing to physically touch each device. This functionality empowers access control systems to dynamically respond as new needs, configurations or threats arise. The HID Signo Reader 40 is a founding member of the Signo platform. Offering a truly dynamic approach to secure electronic access control, HID Signo Readers are designed to be highly versatile, powerful, and connected for the future. A perfect fit for door applications requiring wall switch mounting, the HID Signo Reader 40 supports an unparalleled range of different credential technologies in a variety of form factors including cards, fobs and mobile devices.
Delta Scientific's new bolt down DSC7090 beam barricade has passed its crash test garnering an ASTM M30/P1 rating. That means the DSC7090 will stop a 15,000 pound (6800 kg) truck going 30 mph (50 kph) with negative 6.3 feet (1.9 m) of penetration. Raising in only five seconds and lowering in merely two seconds yields a fast cycle rate of over 100 vehicles in and out per hour, making the new DSC7090 ideal for higher traffic and population locations. The dual beam design provides coverage of 12 to 24 feet (3.7 to 7.3 m) of roadway with a full 90 degree opening. The new DSC7090 will be used in locations where wide roadways need to be secured from attacking vehicles and in larger parking areas where security systems are needed to deter theft. To meet these heightened demands, the DSC7090 deploys sophisticated touch screen controls and the same logic as used by key government organizations. This includes an LED light package with traffic lights. Also available is a strobe light and audible alarm package. The DSC7090 operates remotely by means of an integral Hydraulic Pumping Unit (HPU) that is buttress enclosed. The HPU can be powered from a local single or three-phase power source. Alternative power options are also available.
HID Signo™ is the signature line of physical access control readers from HID Global. The versatility, performance and connected capabilities of HID Signo readers set a new industry benchmark for the most highly adaptable, interoperable and secure approach to electronic access control. Offering an unparalleled breadth of functionality, HID Signo affords security system installers and administrators a simple and effective approach to secure access control for almost any scenario. With support for the widest array of credential technologies — past, present and future — HID Signo is the perfect choice for those looking to make the transition to a secure authentication technology. HID Signo readers transcend the traditional approach to security by being designed to be connected and managed remotely without needing to physically touch each device. This functionality empowers access control systems to dynamically respond as new needs, configurations or threats arise. The HID Signo Keypad Reader 40K is a founding member of the Signo platform. Offering a truly dynamic approach to secure electronic access control, HID Signo Readers are designed to be highly versatile, powerful, and connected for the future. A perfect fit for multi-factor authentication door applications requiring a narrow keypad reader, the HID Signo Keypad Reader 40K supports an unparalleled range of different credential technologies in a variety of form factors including cards, fobs and mobile devices.
Most powerful integration platform in the industryFor the first time ever, customers will be able to intuitively manage their corporate security systems using familiar buttons and navigation panes they're used to seeing with Microsoft® Outlook and other Microsoft programs.Our new Software House C·CURE 9000® Security and Event Management System brings together the best of physical and logical security, integrating both in a way that has long been a goal of security, information technology, and building facilities professionals. C·CURE 9000 uses standard IT tools and processes that make it easy for a company to integrate within its existing network infrastructure. In fact, industry analyst Frost and Sullivan says, "C·CURE 9000 is the first to offer a solution that truly integrates the best of IT and physical security."Why choose C•CURE 9000?DatabasesSupport for industry-leading databases, Microsoft SQL Server 2005, and Oracle 10g that lets you fit C•CURE 9000 easily into your existing IT infrastructure means there are no additional database costs for customers with existing database resources. CommandProvides the standard IT tools and innovative distributed architecture that elevates the security system as an important enabler to your business' success. ControlGives a unique spin to a familiar Microsoft Windows look and user experience.CommunicationWith unsurpassed integration capabilities, C·CURE 9000 possesses one of the richest communication platforms in any industry. ConvergenceBuilt from the ground up on our innovative integration platform, C·CURE 9000 delivers convergence by bringing the best of physical and logical security together. LanguagesNow available in French, German, and Spanish and Arabic.Add to Compare
HID goID™ platform for mobile IDs delivers the secure infrastructure to allow citizen IDs to be safely provisioned to and authenticated on a smartphone. HID goID™ allows smartphones to be used for identification purposes, but also for transactions in ways not possible with an ID card. HID goID™ Impacts Travel A smartphone using HID goID™ enhances a citizen’s day-to-day experience. Imagine how HID goID™ can impact travel. Today, citizen’s use a national ID or driver’s license at the airport for domestic travel, but also carry a boarding pass separately on a phone or a piece of paper. With HID goID™, the two converge – providing greater security, convenience and flexibility for both the citizen and the authenticating party. Rather than in wallets, IDs can now be securely stored on smartphones. Customized Details HID goID™ can be customized to only release relevant information so citizens can control when and how much information is shared, allowing them to protect their privacy. For example, when a citizen is purchasing age-restricted goods, they only need to provide their photo and age – none of the other personal information loaded on a physical driver’s license needs to be shared. Other HID goID™ advantages include the ability to renew or modify the driver’s licenses and other ID credentials remotely, saving citizens from traveling and waiting in a crowded office environment. This is also good news for government agencies, who can do their jobs more efficiently. Download HID White Paper: Mobile ID Solutions for Government-to-Citizen ApplicationsAdd to Compare
Browse Access Control Softwares
Access control software products updated recently
Companies are following government guidance and getting as many people as possible working from home. Some companies will have resisted home working in the past, but I’m certain that the sceptics will find that people can be productive with the right tools no matter where they are. A temporary solution will become permanent. But getting it right means managing risk. Access is king In a typical office with an on-premise data center, the IT department has complete control over network access, internal networks, data, and applications. The remote worker, on the other hand, is mobile. He or she can work from anywhere using a VPN. Until just recently this will have been from somewhere like a local coffee shop, possibly using a wireless network to access the company network and essential applications. CV-19 means that huge numbers of people are getting access to the same desktop and files, and collaborative communication toolsBut as we know, CV-19 means that huge numbers of people are getting access to the same desktop and files, applications and collaborative communication tools that they do on a regular basis from the office or on the train. Indeed, the new generation of video conferencing technologies come very close to providing an “almost there” feeling. Hackers lie in wait Hackers are waiting for a wrong move amongst the panic, and they will look for ways to compromise critical servers. Less than a month ago, we emerged from a period of chaos. For months hackers had been exploiting a vulnerability in VPN products from Pulse Secure, Fortinet, Palo Alto Networks, and Citrix. Patches were provided by vendors, and either companies applied the patch or withdrew remote access. As a result, the problem of attacks died back. But as companies race to get people working from home, they must ensure special care is taken to ensure the patches are done before switching VPNs on. That’s because remote desktop protocol (RDP) has been for the most part of 2019, and continues to be, the most important attack vector for ransomware. Managing a ransomware attack on top of everything else would certainly give you sleepless nights. As companies race to get people working from home, they must ensure special care is taken to ensure the patches are done before switching VPNs on Hackers are waiting for a wrong move amongst the panic, and they will look for ways to compromise critical serversExposing new services makes them also susceptible to denial of service attacks. Such attacks create large volumes of fake traffic to saturate the available capacity of the internet connection. They can also be used to attack the intricacies of the VPN protocol. A flow as little as 1Mbps can perturbate the VPN service and knock it offline. CIOs, therefore, need to acknowledge that introducing or extending home working broadens the attack surface. So now more than ever it’s vital to adapt risk models. You can’t roll out new services with an emphasis on access and usability and not consider security. You simply won’t survive otherwise. Social engineering Aside from securing VPNs, what else should CIO and CTOs be doing to ensure security? The first thing to do is to look at employee behavior, starting with passwords. It’s highly recommended that strong password hygiene or some form of multi-factor authentication (MFA) is imposed. Best practice would be to get all employees to reset their passwords as they connect remotely and force them to choose a new password that complies with strong password complexity guidelines. As we know, people have a habit of reusing their passwords for one or more online services – services that might have fallen victim to a breach. Hackers will happily It’s highly recommended that strong password hygiene or some form of multi-factor authentication (MFA) is imposedleverage these breaches because it is such easy and rich pickings. Secondly, the inherent fear of the virus makes for perfect conditions for hackers. Sadly, a lot of phishing campaigns are already luring people in with the promise of important or breaking information on COVID-19. In the UK alone, coronavirus scams cost victims over £800,000 in February 2020. A staggering number that can only go up. That’s why CIOs need to remind everyone in the company of the risks of clickbait and comment spamming - the most popular and obvious bot techniques for infiltrating a network. Notorious hacking attempts And as any security specialist will tell you, some people have no ethics and will exploit the horrendous repercussions of CV-19. In January we saw just how unscrupulous hackers are when they started leveraging public fear of the virus to spread the notorious Emotet malware. Emotet, first detected in 2014, is a banking trojan that primarily spreads through ‘malspam’ and attempts to sneak into computers to steal sensitive and private information. In addition, in early February the Maze ransomware crippled more than 230 workstations of the New Jersey Medical Diagnostics Lab and when they refused to pay, the vicious attackers leaked 9.5GB or research data in an attempt to force negotiations. And in March, an elite hacking group tried to breach the World Health Organization (WHO). It was just one of the many attempts on WHO and healthcare organizations in general since the pandemic broke. We’ll see lots more opportunist attacks like this in the coming months. More speed less haste In March, an elite hacking group tried to breach the World Health Organization (WHO). It was just one of the many attempts on WHOFinally, we also have bots to contend with. We’ve yet to see reports of fake news content generated by machines, but we know there’s a high probability it will happen. Spambots are already creating pharmaceutical spam campaigns thriving on the buying behavior of people in times of fear from infection. Using comment spamming – where comments are tactically placed in the comments following an update or news story - the bots take advantage of the popularity of the Google search term ‘Coronavirus’ to increase the visibility and ranking of sites and products in search results. There is clearly much for CIOs to think about, but it is possible to secure a network by applying some well thought through tactics. I believe it comes down to having a ‘more speed, less haste’ approach to rolling out, scaling up and integrating technologies for home working, but above all, it should be mixed with an employee education program. As in reality, great technology and a coherent security strategy will never work if it is undermined by the poor practices
Imagine a home surveillance camera monitoring an elderly parent and anticipating potential concerns while respecting their privacy. Imagine another camera predicting a home burglary based on suspicious behaviors, allowing time to notify the homeowner who can in turn notify the police before the event occurs—or an entire network of cameras working together to keep an eye on neighborhood safety. Artificial Intelligence vision chips A new gen of AI vision chips are pushing advanced capabilities such as behavior analysis and higher-level security There's a new generation of artificial intelligence (AI) vision chips that are pushing advanced capabilities such as behavior analysis and higher-level security to the edge (directly on devices) for a customizable user experience—one that rivals the abilities of the consumer electronics devices we use every day. Once considered nothing more than “the eyes” of a security system, home monitoring cameras of 2020 will leverage AI-vision processors for high-performance computer vision at low power consumption and affordable cost—at the edge—for greater privacy and ease of use as well as to enable behavior analysis for predictive and preemptive monitoring. Advanced home monitoring cameras With this shift, camera makers and home monitoring service providers alike will be able to develop new edge-based use cases for home monitoring and enable consumers to customize devices to meet their individual needs. The result will be increased user engagement with home monitoring devices—mirroring that of cellphones and smart watches and creating an overlap between the home monitoring and consumer electronics markets. A quick step back reminds us that accomplishing these goals would have been cost prohibitive just a couple of years ago. Face recognition, behavior analysis, intelligent analytics, and decision-making at this level were extremely expensive to perform in the cloud. Additionally, the lag time associated with sending data to faraway servers for decoding and then processing made it impossible to achieve real-time results. Cloud-based home security devices The constraints of cloud processing certainly have not held the industry back, however. Home monitoring, a market just seven years young, has become a ubiquitous category of home security and home monitoring devices. Consumers can choose to install a single camera or doorbell that sends alerts to their phone, a family of devices and a monthly manufacturer’s plan, or a high-end professional monitoring solution. While the majority of these devices do indeed rely on the cloud for processing, camera makers have been pushing for edge-based processing since around 2016. For them, the benefit has always been clear: the opportunity to perform intelligent analytics processing in real-time on the device. But until now, the balance between computer vision performance and power consumption was lacking and camera companies weren’t able to make the leap. So instead, they have focused on improving designs and the cloud-centric model has prevailed. Hybrid security systems Even with improvements, false alerts result in unnecessary notifications and video recording Even with improvements, false alerts (like tree branches swaying in the wind or cats walking past a front door) result in unnecessary notifications and video recording— cameras remain active which, in the case of battery powered cameras, means using up valuable battery life. Hybrid models do exist. Typically, they provide rudimentary motion detection on the camera itself and then send video to the cloud for decoding and analysis to suppress false alerts. Hybrids provide higher-level results for things like people and cars, but their approach comes at a cost for both the consumer and the manufacturer. Advanced cloud analytics Advanced cloud analytics are more expensive than newly possible edge-based alternatives, and consumers have to pay for subscriptions. In addition, because of processing delays and other issues, things like rain or lighting changes (or even bugs on the camera) can still trigger unnecessary alerts. And the more alerts a user receives, the more they tend to ignore them—there are simply too many. In fact, it is estimated that users only pay attention to 5% of their notifications. This means that when a package is stolen or a car is burglarized, users often miss the real-time notification—only to find out about the incident after the fact. All of this will soon change with AI-based behavior analysis, predictive security, and real-time meaningful alerts. Predictive monitoring while safeguarding user privacy These days, consumers are putting more emphasis on privacy and have legitimate concerns about being recorded while in their homes. Soon, with AI advancements at the chip level, families will be able to select user apps that provide monitoring without the need to stream video to a company server, or they’ll have access to apps that record activity but obscure faces. Devices will have the ability to only send alerts according to specific criteria. If, for example, an elderly parent being monitored seems particularly unsteady one day or seems especially inactive, an application could alert the responsible family member and suggest that they check in. By analyzing the elderly parent’s behavior, the application could also predict a potential fall and trigger an audio alert for the person and also the family. AI-based behavior analysis Ability to analyze massive amounts of data locally and identify trends is a key advantage of AI at the edge The ability to analyze massive amounts of data locally and identify trends or perform searches is a key advantage of AI at the edge, for both individuals and neighborhoods. For example, an individual might be curious as to what animal is wreaking havoc in their backyard every night. In this case, they could download a “small animal detector” app to their camera which would trigger an alert when a critter enters their yard. The animal could be scared off via an alarm and—armed with video proof—animal control would have useful data for setting a trap. Edge cameras A newly emerging category of “neighborhood watch” applications is already connecting neighbors for significantly improved monitoring and safety. As edge cameras become more commonplace, this category will become increasingly effective. The idea is that if, for example, one neighbor captures a package thief, and then the entire network of neighbors will receive a notification and a synopsis video showing the theft. Or if, say, there is a rash of car break-ins and one neighbor captures video of a red sedan casing their home around the time of a recent incident, an AI vision-based camera could be queried for helpful information: Residential monitoring and security The camera could be asked for a summary of the dates and times that it has recorded that particular red car. A case could be made if incident times match those of the vehicle’s recent appearances in the neighborhood. Even better, if that particular red car was to reappear and seems (by AI behavior analysis) to be suspicious, alerts could be sent proactively to networked residents and police could be notified immediately. Home monitoring in 2020 will bring positive change for users when it comes to monitoring and security, but it will also bring some fun. Consumers will, for example, be able to download apps that do things like monitor pet activity. They might query their device for a summary of their pet’s “unusual activity” and then use those clips to create cute, shareable videos. Who doesn’t love a video of a dog dragging a toilet paper roll around the house? AI at the Edge for home access control Home access control via biometrics is one of many new edge-based use cases that will bring convenience to home monitoring Home access control via biometrics is one of many new edge-based use cases that will bring convenience to home monitoring, and it’s an application that is expected to take off soon. With smart biometrics, cameras will be able to recognize residents and then unlock their smart front door locks automatically if desired, eliminating the need for keys. And if, for example, an unauthorized person tries to trick the system by presenting a photograph of a registered family member’s face, the camera could use “3D liveness detection” to spot the fake and deny access. With these and other advances, professional monitoring service providers will have the opportunity to bring a new generation of access control panels to market. Leveraging computer vision and deep neural networks Ultimately, what camera makers strive for is customer engagement and customer loyalty. These new use cases—thanks to AI at the edge—will make home monitoring devices more useful and more engaging to consumers. Leveraging computer vision and deep neural networks, new cameras will be able to filter out and block false alerts, predict incidents, and send real-time notifications only when there is something that the consumer is truly interested in seeing. AI and computer vision at the edge will enable a new generation of cameras that provide not only a higher level of security but that will fundamentally change the way consumers rely on and interact with their home monitoring devices.
One of the responsibilities of construction project managers is to account for risks during the initial planning for a project and mitigate them. With all the tools, construction materials, and heavy machinery during the initial stages of a project, the construction site is a dangerous place to be at. However, this is not the only risk that project managers need to protect a site from. With plenty of valuables both physical and virtual within a construction site, it is also a prime target for theft and arson. Improving the security of construction sites It is important now more than ever that construction business owners and project managers invest in improving the security of construction sites. After all, security on construction sites is for the protection not only of valuable assets but also of workers and members of the public. Investing in adequate resources for construction site security can prevent several issues, including: Theft of expensive tools and construction equipment Cybersecurity breaches leading to loss of sensitive information such as invoice data Arson resulting in loss of life and property Vandalism of construction site property Trespassing by unauthorized parties and exposure to construction site dangers Risks of injuries that can result in litigation and legal claims Identifying security issues Having a dedicated security team in place is a good first step in bolstering a construction site’s security. They will be able to prevent theft, vandalism, and deter unauthorized personnel from entering the site. They can also identify security issues that can potentially arise and even respond quickly to accidents and other calamities should they occur. Having a dedicated security team in place is a good first step in bolstering a construction site’s security For a better implementation of construction site security measures, it is critical that business owners and managers assess an assessment of the site itself. This will help identify both internal and external risks that can affect the site’s security and guide project managers in putting systems in place to address them. Construction site security checklist To guide you, here is a sample template that you can use to form your own construction site security checklist. SECURITY COORDINATION YES NO 1. Does the site have designated security coordinators? 2. Are the security coordinators available for contact during non-business hours? 3. Does the construction site provide a means to contact the police, fire department, and other relevant authorities in case of emergencies? 4. Does the construction site have a written security plan, including procedures for specific scenarios? 5. If so, are construction site employees aware of the security plan? GENERAL MACHINERY YES NO 1. Are all machinery adequately marked? (Identification number, corporate logo, tags, etc.) 2. Have all the machinery been inventoried? (Serial number, brand, model, value, etc.) 3. Does the project have a list of the names of operators handling the machinery? 4. Are all the machinery fitted with immobilizers and tracking devices when appropriate? 5. Are all the machinery stored in a secure area with a proper surveillance system? 6. Are the keys to the machinery stored in a separate, secure area? TOOLS AND OTHER EQUIPMENT YES NO 1. Are all power tools and hand equipment marked? (Identification number, corporate logo, tags, etc.) 2. Have all power tools and hand equipment been inventoried? (Serial number, brand, model, value, etc.) 3. Are tools and equipment fitted with tags and tracking devices when appropriate? 4. Are tools and equipment stored in a secure place? INVENTORY CONTROL YES NO 1. Is there a system in place to check material inventory to ensure they are not misplaced or stolen? 2. Are there procedures in place for checking materials that go in and out of the construction site? 3. Is there a set schedule for checking materials and equipment? 4. If so, do the records show that the schedule is followed strictly? 5. Are all material suppliers arriving for delivery properly identified? (e.g license plates, driver’s license, etc) CONSTRUCTION SITE PERIMETER YES NO 1. Is there a physical barrier in place to secure the site? 2. Is the number of gates kept to a minimum? 3. Are there uniformed guards at every gate to check personnel and vehicles entering and leaving the site? 4. Are security warnings displayed prominently at all entry points? 5. Are entry points adequately secured? (With industry-grade padlocks, steel chains, etc.) 6. Is there an alarm system? 7. Is the locking system integrated with the alarm? 8. Is the site perimeter regularly inspected? 9. Are “NO TRESPASSING” signs displayed prominently along the perimeter? LIGHTING AND SURVEILLANCE YES NO 1. Is there sufficient lighting on the construction site? 2. Is there a dedicated staff member assigned to check if the lighting is working properly? 3. Is the site protected by CCTV cameras? 4. Are there signs posted on site indicating the presence of security cameras? 5. Are there motion detection lights installed on-site? INTERNAL CONTROLS YES NO 1. Is there a policy on employee theft? 2. Are employees aware of the policy? 3. Are employees required to check in and check out company properties when using them? 4. Are staff members encouraged to report suspicious activity? 5. Is there a hotline employees can call to report security lapses and breaches? SITE VISITORS YES NO 1. Are visitors checking in and out? 2. Are vehicles entering and exiting the site recorded? CYBERSECURITY YES NO 1. Are the construction site’s documents and other sensitive data stored in the cloud securely? 2. Does the company have a strong password policy? 3. Are asset-tracking data accessible online? 4. Are confidential documents and data regularly backed up? 5. Are employees well-informed about current cyberattack methods such as phishing? Security is a serious business in construction. Because of the dangers already present on your construction site, a lapse in security can have devastating effects on your business’s operations. Not only do you risk losing money in a security breach, but more importantly, you also risk endangering the lives of your site’s personnel and third parties. Business owners and project managers need to make a concerted effort to educate employees about security and double down on their best practices for protecting their sites.
Related white papers
Beyond Security - Access Control For Multi-Tenant Sites
RFID and Smartphone Readers in Physical Access Control
Access Control & Intelligent Vehicle Screening
How To Drive B2B Security & Operations With Smart SurveillanceDownload
Wireless Security: Cut Costs Without Cutting CornersDownload
Hybrid Hyperconverged Systems Benefit Growing Storage and Retention NeedsDownload
- Haier Industrial Park In Russia Deploys Dahua Technology’s Intelligent Security System
- Eagle Eye Networks Completes Citywide Surveillance Program Of Installing Cameras In Mexico City
- Delta Scientific Installs HD300EM Barricade System To Secure Bradley Air National Guard Base
- IDIS Enhances Video Surveillance System At Carrefour With The Solution Suite VMS