DSX Access Control Accessories (18)
The DSX-USB Communications Interface is a simple yet rugged USB converter. This port powered device connects to any 2.0 USB Port through the supplied cable. The module provides an RS-232 output including DTR and a simultaneous RS-485 4 wire output.This module is protocol independent and can be used for a variety of applications and software not just DSX. The DSX-USB is built DSX tough with a rugged housing and all of the over-voltage surge protection you expect in a DSX product. Complete with removable terminal block and status LEDs, this USB Comm Interface has a DSX Edge.Single Channel USB to RS-232 or RS-485 for Master or Slave communications. This new module can provide the RS-232 required for a 1040 Series Master Controller or Dial-up Modem at the Comm Server. The RS-232 has optional DTR for modem use. The RS-485 output can be used for a 1020 Series Master Controller and all DSX Slave Communications used with IP Gateway.The DSX-USB can be used in conjunction with a DSXMCI to perform a short haul providing a 4 wire RS-485 connection that can be used with 2 twisted pair cable up to 4000'.Key features:USB to RS-232 with DTRUSB to RS-485 4 wireRemovable Terminal BlocksPort PoweredUSB 2.0 CompatibleOver Voltage Surge ProtectionProtocol IndependentCommunication Status LEDsAdd to Compare
Browse Access Control Accessories
Access control accessory products updated recently
The SolarWinds cyberattack of 2020 was cited by security experts as “one of the potentially largest penetrations of Western governments” since the Cold War. This attack put cybersecurity front and center on people’s minds again. Hacking communication protocol The attack targeted the US government and reportedly compromised the treasury and commerce departments and Homeland Security. What’s interesting about the SolarWinds attack is that it was caused by the exploitation of a hacker who injected a backdoor communications protocol. This means that months ahead of the attack, hackers broke into SolarWinds systems and added malicious code into the company’s software development system. Later on, updates being pushed out included the malicious code, creating a backdoor communication for the hackers to use. Once a body is hacked, access can be gained to many. An explosion of network devices What has made the threat of cyberattacks much more prominent these days has been IT's growth in the last 20 years, notably cheaper and cheaper IoT devices. This has led to an explosion of network devices. IT spending has never really matched the pace of hardware and software growth Compounding this issue is that IT spending has never really matched the pace of hardware and software growth. Inevitably, leading to vulnerabilities, limited IT resources, and an increase in IoT devices get more attention from would-be hackers. Bridging the cybersecurity gap In the author’s view, this is the main reason why the cybersecurity gap is growing. This is because it inevitably boils down to counter-strike versus counter-strike. IT teams plug holes, and hackers find new ones, that is never going to stop. The companies must continue fighting cyber threats by developing new ways of protecting through in-house testing, security best practice sources, and both market and customer leads. End-user awareness One of the key battlegrounds here is the education of end-users. This is an area where the battle is being won at present, in the author’s opinion. End-users awareness of cybersecurity is increasing. It is crucial to educate end-users on what IoT devices are available, how they are configured, how to enable it effectively, and critically, how to use it correctly and safely. Physical security network A valuable product that tackles cybersecurity is, of course, Razberi Monitor™, which is new to ComNet’s portfolio. Monitor™ is a software platform that provides a top-down view of the physical security network and ecosystem. Monitor™ is a software platform that provides a top-down view of the physical security network and ecosystem It monitors and manages all the system components for cybersecurity and system health, providing secure visibility into the availability, performance, and cyber posture of servers, storage, cameras, and networked security devices. Proactive maintenance By intelligently utilizing system properties and sensor data, Razberi’s award-winning cybersecurity software prevents problems while providing a centralized location for asset and alert management. Monitor™ enables proactive maintenance by offering problem resolutions before they become more significant problems. Identifying issues before they fail and become an outage is key to system availability and, moreover, is a considerable cost saving.
Q: Mr. Seiter, Mr. Ekerot, you both joined Bosch Building Technologies’ business unit Video Systems & Solutions as Senior Vice Presidents in March 2020, when the Coronavirus pandemic was just beginning. How did your business unit get through 2020? Magnus Ekerot: The crisis was also felt at Bosch. At the same time, demand has risen for solutions that keep businesses open and protect people's health. We offer corresponding video solutions that can make a significant contribution to containing the pandemic. Michael Seiter: Overall, we managed the past year well despite the challenges and have been growing again since the third quarter compared to 2019. We see good opportunities for further growth in 2021. Q: Has the Corona crisis again accelerated the development of smart technologies in the security technology market, and does the security market in contrast to most industries benefit from the crisis more than it suffers? Michael Seiter: The Corona crisis has definitely demonstrated that the future lies in data-driven solutions. Thanks to our product development strategy already being based on this, we at Bosch were very quickly able to develop new products for the ‘New Normal’ and to expand existing products accordingly. To give one or two examples: in cooperation with Philips, we very quickly developed a people counting solution for retail operations – smart Philips displays in conjunction with smart cameras from Bosch that provide protection for staff and customers. The In-Store Analytics software solution was also implemented with additional features. Shop owners can now make decisions based on customer movement data such as “Where do we position products to avoid queues or crowds?” HTD involves a touch-free monitoring system to accurately and speedily identify people with heightened skin temperature The latest highlight is the Bosch Human Skin Temperature Detection solution, in short HTD. This involves a touch-free monitoring system to accurately and speedily identify people with heightened skin temperature at control points in offices, factory floors, or airports. The benefits of previously existing solutions on the market are sometimes called into question. Competitors are often unable to deliver what they promise because, for example, the measured temperature of the skin does not correspond to the core temperature of the person, or fluctuates, due to environmental influences. Therefore, we developed a software-based solution that, in compliance with GDPR, first allows people with potentially elevated body temperatures to be filtered out, and in a second step, allows medical personnel to perform a more targeted fever measurement. Q: You see a lot of potential for the video security industry in new technologies such as Artificial Intelligence and the Internet of Things. What specific opportunities do you mean, and how are you leveraging these technologies at Bosch Building Technologies? Michael Seiter: Bosch has committed itself fully to an “AIoT” – AI meets IoT – strategy. The development of AI algorithms and software, in general, is at Bosch significantly driven in the security space. By AIoT, we specifically mean the networking of physical products and the deployment of artificial intelligence. With AI we aim to enable clients to understand events at an ever-deeper level and predict them in the future – the keyword being predictive – so that they can act proactively. This is particularly important for health and safety. An example is the Intelligent Insights solution where the user can anticipate potentially dangerous situations, for instance in maintaining social distance and a maximum number of people numbers in any one area. Q: From your point of view do you have an advantage over other suppliers when it comes to AI-based products in the video arena? Michael Seiter: The analysis and utilization of video data have long been front and center with us. Since 2016 we’ve been following the strategy of offering AI applications in the form of integrated intelligent video analytics as a standard in our network cameras. Data such as color, object size, object speed, and direction are all measured. Simply put, you can say this is seeing and understanding – which is the principle behind smart security cameras. Today it’s much more a question of intelligent, data-based solutions than collecting high-quality pictures and storing them for the record. Bosch has been investing heavily in AI for years, from which we can benefit greatly in our area. In the first quarter, for example, we will launch a vehicle detector based on deep learning that is already running on our cameras. This will create significant added value for our customers in the area of intelligent traffic control. Q: Mr. Ekerot, what advantages do customers have in AI-based video security from Bosch? Magnus Ekerot: A key advantage is strong customer focus with tailored solutions that are at the same time modular and scalable through new AI algorithms A key advantage is our strong customer focus with tailored solutions that are at the same time modular and scalable through new AI algorithms. Take the example of Camera Trainer, a machine learning software that can be directly uploaded to Bosch network cameras. The camera is thus trained up on recognizing objects and situations – tailored to the specific needs of our customers. If the camera detects the defined scenario, it performs a predefined action in real-time – for example, a count or an alarm. The latest example is our new camera platform Inteox. As a completely open camera platform, Inteox combines Bosch's intelligent video analytics with an open operating system. This allows programmers to develop specific software applications - or apps - for various application purposes. These can then be loaded onto cameras – the same principle as an app store for smartphones. To sum up, Bosch AI applications support customer-specific needs related to data analysis while enabling totally new applications within and beyond the video security market. Q: Can you name a specific current project where Bosch has deployed an AI-based solution? Magnus Ekerot: A current ground-breaking project using our smart cameras is being implemented as a pilot in the USA. Smart Ohio enables users to configure more intelligent traffic flows and thus ensure mobility, safety, and the efficient use of roads today and tomorrow. The new vehicle detector mentioned by Mr. Seiter also plays a central role here. Our overall goal is to provide connected smart sensor solutions for public and private transportation agencies to enable them to operate their roads safely and efficiently. The Intelligent Insights can anticipate potentially dangerous situations, for instance in maintaining social distance and a maximum number of people numbers in any one area Q: Mr. Seiter, you have been involved with the topic of mobility for some time. What experience from your previous job in the automotive business of Bosch might help you when it comes to further develop the video portfolio of Bosch Building Technologies? Michael Seiter: There's a lot to tell. First of all, the development of core algorithms for video-based solutions, whether for autonomous driving, for vehicle interior monitoring, or for our Bosch Building Technologies video systems, all come together at Bosch's Hildesheim location. This gives us considerable synergies and allows us to bring R&D results to market faster and more flexibly. Essentially, assisted driving systems use AI algorithms that process ever-increasing volumes of video data. Attempts are being made to imitate the human being and enable the vehicle to understand better the surrounding environment with its ‘eyes’. This predictive capability is especially critical with autonomous driving. For example, key questions include: “How should the car respond and what could potentially happen next?” “What kind of environment does it find itself in?” etc. There are many activities in this area at Bosch that in my new role in security we can also strongly benefit from. I am now bringing a lot of this experience and existing R&D achievements to Bosch Video Systems & Solutions, which also results in further synergies with our mobility division: At Stuttgart Airport, autonomous driving is already being implemented together with Mercedes-Benz and the parking garage operator Apcoa as part of the "Automated Valet Parking" project, or AVP for short, in which intelligent video systems from Bosch Building Technologies are making a significant contribution. Mr. Ekerot, you have a lot of experience in the video security area. Where do you position Bosch Building Technologies now in this market and what specific goals are you pursuing? Magnus Ekerot: Our clients are looking for reliable partners and products. We are a strong brand; you can rely on Bosch products. Bosch is a thought leader in video and a pioneer in AI applications in this field since 2016. Data security is everything to us: Our products conform to the EU’s GDPR regulations. Beyond that, we have an extensive camera portfolio that complies with the US National Defense Authorization Act (NDAA) for video security devices. This enables our portfolio to be deployed for example within US government buildings. We are planning to conclude more software maintenance agreements with our clients in 2021. These deliver investment and future security for our customers and include for example a ‘patch guarantee’ along with regular updates with new functionalities. This is the first step in a comprehensive plan to access new revenue channels for us and our partners delivering the best technology and excellent service to the end-user! Overall, many new products will be launched this year and this trend will intensify. Our goal is to establish new product families that follow a simple principle: “The development and delivery of disruptive, predictive video solutions that every user can trust because of the underlying sustainable forward-thinking mindset.” It’s been much discussed of late that Bosch is one of the very first companies globally that operates on a CO2-neutral basis. How does sustainability impact your business? Magnus Ekerot: IoT solutions are actually sustainable and contribute to environmental protection Our IoT solutions are actually sustainable and contribute to environmental protection. For example, our cameras are sustainable in that they remain up-to-date through software updates and needn’t be constantly exchanged for new ones. Our systems demonstrate sustainability also operationally as they can be managed remotely. System integrators don’t need to be physically present, thus avoiding unnecessary travel with its accompanying emissions. All in all, Bosch Building Technologies develops ways to accompany and support our clients in reaching their climate goals via new technologies. This can be done, for example, through improved energy efficiency, the total cost of ownership models, organizing and simplifying the supply chain, and helping our customers meet their social responsibilities. The Power of Bosch helps us here to leverage company-wide research to be two steps ahead, a shade faster, when it comes to new technologies and initiatives that our and future generations will benefit from. I should also say that I am personally very proud to work for a company that set an ambitious climate goal for itself and achieved it! Can you already share a preview of your technology innovations in 2021? Michael Seiter: We see great market potential for our cameras that use artificial intelligence and can be updated flexibly throughout their lifecycles. I have already mentioned the deep learning-based vehicle detector in our cameras. More such solutions – also for other applications where object and person recognition are important – will follow in the course of the year. And the best part is: with AI, the more data we collect and the more intelligently we use it, the better the solutions become and the more added value they bring to the customer. This will revolutionize our industry! Another example is our cloud-based solutions, for example for alarm monitoring. Here, we can now also integrate third-party cameras and, building on this, offer and jointly develop our intelligent software-based solutions. This gives our customers more opportunities to take advantage of the opportunities created by AI. The trend towards integration of the various security technologies seems to be driven mostly by the rapid progress in software development. Does this affect full-range suppliers such as Bosch and what specific plans for fully integrated security solutions do you have for the future? Michael Seiter: Naturally, this suits us as a full-scope supplier. Bosch solutions are deployed in many cross-domain client projects. We have experts for the different domains under one roof and a strong brand with the same quality promise for all areas. Nevertheless, it is always also about specific domain excellence. Only when you master all different areas and have profound and proven expertise in each of them you can succeed in integrated cross-domain projects. The respective business units craft their future strategies and innovation roadmaps with this in mind – as we do in the field of Video Systems & Solutions. Our business unit offers fully integrated Bosch video solutions that can be extended and operated on open systems. This is why we drive open platforms such as Inteox, to offer customers from a wide range of industries the right solutions. Our Bosch Integration Partner Program that we launched in 2012 is also heading in this direction – every product can be integrated into multiple other systems and VMS solutions. In summary: At Bosch, we are both a one-stop-shop, but also an open-system, meaning we offer customers maximum flexibility in their choice of products and services.
The physical security market continues to experience growth as users look to capitalize on the promises of emerging technologies and because of this, 2017 proved to be a great year for Oncam. In fact, this year was the best year in Oncam's history in terms of sales, as 360-degree fisheye cameras have gone from being a “specialty” camera used only in certain applications to a primary device for enabling total situational awareness. Today, many of our customers leverage 360-degree cameras exclusively to provide extensive coverage inside a facility or in a large outdoor area, with traditional narrow field-of-view cameras used only at “choke” points. Increase In Cybersecurity Threats And Breaches At the end of 2016, we predicted a major trend this year would be an increase in cybersecurity concerns for users of physical security systems, and we were right. An increase in cybersecurity threats and breaches have put organizations on watch. Based on this and the adoption of more IT-centric infrastructure and protocols, there is significant collaboration between IT and physical security, and true “convergence” is finally starting to happen. The adoption of video analytics also continued to increase this year, as most video surveillance projects involved the use of some form of analytics and data analysis. Demand For Safeguards As we move into 2018, the trends of 2017 will roll over, and cybersecurity will continue to be a major issue. Suppliers of hardware and software will put an even greater emphasis being cyber secure and end users will increasingly demand safeguards. Additionally, the deployment and use of advanced analytics based on newer artificial intelligence-based technologies will continue to increase. It will be the technology providers that find ways to allow users to capture additional value from the information collected by security systems that will accelerate growth. Oncam made significant investments in new products that leverage analytics and cloud technologies. In 2018, we will continue to invest in the development of new products, with a focus on solutions for particular applications across industry segments. Beyond our technology advancements, we've invested significantly in boosting our sales force in the Americas and adding industry experts to ensure sustained customer and partner success with our solutions. From our vantage point, Oncam is well positioned to capitalize on opportunities for growth in the coming year.
On the heels of the release of Ocularis 5.0, OnSSI has now announced the introduction of several new technology integrations for its recently released VMS with C2P’s software solution. Ocularis 5.0, which is based on a new recorder, maximizes HDD storage effectiveness with dynamic data management for automatic storage load balancing, End-to-End 256 bit AES Encryption and edge recording support. The newly certified integrations with Ocularis 5.0, provide security professionals with valuable situational information across a wide range of applications including banking, access control, asset tracking, license plate recognition and point-of-sale. “The correlation of video and data creates an extremely effective and intelligent security solution,” said Ken LaMarca, VP of Sales and Marketing, OnSSI. “Ocularis’ open architecture not only makes this integration possible, it results in a powerful tool that meets a variety of demanding applications and delivers comprehensive intelligence across multiple platforms. Most important, beyond the power of these integrations, the systems provide vital information, better enabling the operators to assess emerging situations and provide them with information to choose an appropriate course of action.” Details On These Integrations Are As Follows: Banking Integrations with Diebold and Fiserv for teller terminals and ATM deployments allow for TCP/IP text and/or events to be streamed live directly to Ocularis in the form of JPEG images. The TCP/IP data is also stored as texts for forensic searches afterwards. All banking transactions are time synchronized with area video surveillance in real-time and includes real-time charting of specific events. Access Control These integrations with Axis, DMP, DSX, FST21, Hirsch, ISONAS, Keri Systems, Keyscan, and RBH provide for real-time access control activity and user defined, real-time on-screen event annotation. The seamless integration with OnSSI provides real-time analytics which enables users to define rules based on the text received from the access control system. These rules are then used to engage the full power of the Ocularis Event Fusion engine to push video of the event to predefined client screens, lock/unlock doors, blow horns, turn PTZs, send email and SMS alerts, etc. The C2P framework also includes a powerful text search tool, linking all texts received from the access control system with stored surveillance video. Reports are available for export as CSV files and also as video evidence. Asset Tracking Traditional asset tracking is enhanced by this integration, allowing users of Visonic RFID or generic bar code readers to see real-time onscreen notifications of asset activity, as well as email and SMS alerts. The information can be exported for video evidence or as a CSV file for reporting purposes. License Plate Recognition This LPR integration with ELSAG, HTS, Inex/Zamir, Mango, PlateSmart and Vigilant Solutions provides users with real-time onscreen confirmation of LPR activities, the ability to graph specific events, and time synchronization of all license plate reads with area surveillance video. Onscreen event connotation, email and SMS alerts, a powerful search tool for all LPR text, and stored video are included. Exports include reports as a CSV file or video evidence. Point-Of-Sale Integrations with IBM RMS, LOC, Micros, NCR Radiant, and POSitouch provide for all POS transactions to be time-synchronized with all Ocularis surveillance video. Real-time features include onscreen POS terminal activity, time graphing of specific events and POS transaction analytics enabling users to quickly find activities of interest. User-defined event annotation via onscreen messaging and push video, email and SMS alerts are also included. Video evidence can easily be exported as CSV files or displayed onscreen as a camera view. “Working with OnSSI to accomplish this integration has been a smooth and positive experience thanks to the open architecture of Ocularis 5.0,” said Paul Eaton, President and CTO, C2P. “The solution efficiently addresses the complexities of bringing together video and data for highly effective use in security applications.”
Integrated Biometrics' TRU650 biometric fingerprint readerDSX and Integrated Biometrics have partnered to seamlessly integrate the TRU650 biometric fingerprint reader with the DSX enterprise access control system. Scott Bennett, DSX National Sales Manager said: "DSX Access Systems has selected Integrated Biometrics' TRU650 as our biometric reader of choice." "The ease of use, easy installation and enrolment, virtually non-existent rejection rate, clean aesthetics and great product support, we believe, will provide our dealers with the biometric device that they have been searching for."DSX dealer Arthur Van Zant said: "This is the only biometric solution we will offer to our customers. It does what it is designed to do, it does it well, and it does it every time. The authentication is fast and accurate, and we are very pleased with the equipment, the software, and the company that stands behind it." These endorsements illustrate the unparalleled usability and security of Integrated Biometrics' Light Emitting Sensor fingerprint imaging technology. LES has enabled the TRU650 to overcome problems common with competing products, satisfy customers and deliver profits for DSX dealers.
Avigilon's surveillance software, Control Center's open architecture enables effective interoperabilityAvigilon, the performance and value leader in high definition (HD) and megapixel video surveillance systems, announced at IFSEC 2010 that its award-winning Avigilon Control Center software has been integrated successfully with the industry's leading access control, critical communication, alarm monitoring, intrusion detection, and visitor management systems. Avigilon Control Center now combines the powerful engine of the leading high definition video platform with third party access control and intrusion detection capabilities for improved security management.Expanded partnerships ensure interoperabilityAvigilon Control Center includes a number of integration options that enable the exchange of high definition, IP-based and analog surveillance video with events between Avigilon Control Center and other physical security systems. Avigilon Control Center integrations associate HD and other video information with relevant security events such as forced doors, ID badge swipes, and intercom activation to deliver immediate verification and improved security management.Avigilon Control Center capabilities have now been expanded to integrate with Cardax FT Command Center security management system; GE Facility Commander security management system; RS2 Technologies access management solution; and DSX WinDSX access control software. With the next release, scheduled to be available in Q2 2010, Avigilon Control Center will also integrate with the Stentofon IP intercom management system. As an existing member of the Lenel OpenAccess Alliance Programme, Avigilon is certified to integrate with the OnGuard solution. Avigilon Control Center combines high definition video platform with third party access control and intrusion detection capabilitiesAvigilon Control Center Alarm MonitoringIntegration with third party access control platforms is enhanced by Avigilon Control Center's alarm monitoring feature, which allows the creation of complete end-to-end workflows for the monitoring, assignment, and acknowledgement of alarms. Alarms can be triggered by any internal system event as well as external triggers from third party access control and building management systems. Alarms can be assigned to specific individuals, ranked by priority, and automatically trigger actions on acknowledgement. The Avigilon Control Center Rules Engine presents an effective alternative to hardware switches passing alarms and event notices to third-party devices."The extended flexibility and openness of Avigilon Control Center will enable security professionals to manage integrated security and facility management systems that leverage existing infrastructure and personnel investments," said Dave Tynan, Vice President of global sales and marketing at Avigilon. "These integrations facilitate the association of HD video for immediate confirmation of indisputable details from video to manage alarms effectively, dramatically improve decision making, and effectively deploy resources."Avigilon Control Center Network Video ManagementThe award-winning, enterprise-class Network Video Management platform, Avigilon Control Center was engineered from the ground up to intelligently manage HD video, delivering both situational awareness and complete image detail. Avigilon Control Center captures, transmits, manages, stores, archives, plays back, and exports HD video while efficiently handling bandwidth and storage. Control Center's modular, open architecture allows system designers to integrate Avigilon solutions with existing assets including analog and IP cameras, access control and other intrusion systems. In 2010, Avigilon Control Center won the Frost & Sullivan Surveillance New Product Innovation of the Year award.
Related white papers
Facing the Ever-evolving Hacker Head-on
RFID and Smartphone Readers in Physical Access Control
Access Control & Intelligent Vehicle Screening
Artificial Intelligence: Understanding Its Place In Physical SecurityDownload
Delivering Smart, Secure and Healthy Retail Environments with the CloudDownload
Protecting Your Data Against Physical ThreatsDownload
Achieving True Situational Awareness In Operation Centers With Computer Vision & AIDownload